Skip to contentSkip to conversation

PROBLEM: GPT partition table + RAID: kernel could not load init while root filesystem is mounted

DISCUSSION manio 1 participant 4 messages Sep 18, 2010 – Sep 27, 2010

lore
Share & tools
lore

manio

author
#0 lore raw

Hello
I am trying to migrate from old root filesystem (linux raid1 on disks with msdos partition table) to new (4K sector) disks with GPT partition table (also raid1). I am using raid autodetection (i have superblock v0.90 on all raid devices) and i am passing /dev/mdX as a root device to the kernel. When i am passing root=/dev/md10 (old disks with msdos partition tables) booting process is fine (i am pasting relevant info):

[    6.695241] raid1: raid set md10 active with 2 out of 2 mirrors
[    6.695280] md10: detected capacity change from 0 to 6999572480
[    6.695332] md: ... autorun DONE.
[    6.695407]  md10: unknown partition table
[    6.696236] EXT3-fs (md10): error: couldn't mount because of unsupported optional features (240)
[    6.696508] EXT2-fs (md10): error: couldn't mount because of unsupported optional features (240)
[    6.743086] EXT4-fs (md10): mounted filesystem with ordered data mode
[    6.743185] VFS: Mounted root (ext4 filesystem) readonly on device 9:10.
[    6.743227] Freeing unused kernel memory: 424k freed

..... now comes INIT - and it boots correctly

BUT (!) the problem is when i am trying to pass root=/dev/md0 (raid1 on new disks with GPT partition tables). Then it seems like kernel cannot run /sbin/init from my ext4 root partition. The root filesystem seems to be mounted OK:

md: ... autorun DONE.
md0: unknown partition table
EXT3-fs (md0): error: couldn't mount because of unsupported optional features (240) EXT2-fs (md0): error: couldn't mount because of unsupported optional features (240) EXT4-fs (md0): mounted filesystem with ordered data mode
VFS: Mounted root (ext4 filesystem) readonly on device 9:0.
Freeing unused kernel memory: 424k freed

..... now there is some USB init debug info and it stop :( /sbin/init is not launched and it seems like the kernel hung :( i was waiting several minutes then - and nothing happend.

If you would like to see how the boot process look like from the grub to the kernel hung (filmed with my digital camera) then download this:
http://manio.skyboo.net/kernel-gpt-init-problem.avi

please help me - any tips are welcome

best regards,

Signature · 3 lines
Mariusz Bialonczyk
jabber/e-mail: [email protected]
http://manio.skyboo.net
#1 lore raw
Quoted 36 lines · manio

Hello
I am trying to migrate from old root filesystem (linux raid1 on disks with msdos partition table) to new (4K sector) disks with GPT partition table (also raid1). I am using raid autodetection (i have superblock v0.90 on all raid devices) and i am passing /dev/mdX as a root device to the kernel. When i am passing root=/dev/md10 (old disks with msdos partition tables) booting process is fine (i am pasting relevant info):

[ 6.695241] raid1: raid set md10 active with 2 out of 2 mirrors
[ 6.695280] md10: detected capacity change from 0 to 6999572480
[ 6.695332] md: ... autorun DONE.
[ 6.695407] md10: unknown partition table
[ 6.696236] EXT3-fs (md10): error: couldn't mount because of unsupported
optional features (240)
[ 6.696508] EXT2-fs (md10): error: couldn't mount because of unsupported
optional features (240)
[ 6.743086] EXT4-fs (md10): mounted filesystem with ordered data mode
[ 6.743185] VFS: Mounted root (ext4 filesystem) readonly on device 9:10.
[ 6.743227] Freeing unused kernel memory: 424k freed

..... now comes INIT - and it boots correctly

BUT (!) the problem is when i am trying to pass root=/dev/md0 (raid1 on new disks with GPT partition tables). Then it seems like kernel cannot run /sbin/init from my ext4 root partition. The root filesystem seems to be mounted OK:

md: ... autorun DONE.
md0: unknown partition table
EXT3-fs (md0): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (md0): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (md0): mounted filesystem with ordered data mode
VFS: Mounted root (ext4 filesystem) readonly on device 9:0. Freeing unused kernel memory: 424k freed

Quoted 3 lines

..... now there is some USB init debug info and it stop :( /sbin/init is not launched and it seems like the kernel hung :( i was waiting several minutes then - and nothing happend.

after some investigation i am almost sure that the problem is with kernel_execve() - i put some debug info and i can see that last call from init/main.c is:
run_init_process("/sbin/init");
i was checking the boot partition - it is same correct ext4 filesystem with same contents - the only difference between them is the partition table - the problem is on GPT, while on msdos partition table it calls INIT correctly after kernel_execve call. On GPT it hungs - maybe it is not jumping into correct location?
Strange thing is - that the root filesystem in both cases is mounted, so why it has trouble to run /sbin/init in GPT case?

Last time i forgot to mention that i am using kernel 2.6.36-rc4 but i was also testing it on 2.6.34 with same results.
I am using x86_64 architecture.

regards,

Signature · 3 lines
Mariusz Bialonczyk
jabber/e-mail: [email protected]
http://manio.skyboo.net
#2 lore raw
Quoted 2 lines · Mariusz Bialonczyk

after some investigation i am almost sure that the problem is with kernel_execve()

... and i was damn wrong!
I put a lot of debug printf's inside init and i must admit that INIT is launched correctly! So i think it's not a kernel problem here because it successfully starting init, sorry for bothering you, guys :( I also bisected the place where init stops and it totally freezes when
calling: close(2). I was also testing upstart with same hung results (upstart it also closing stderr).
Sorry for little off-topic question: Maybe you know why sysvinit and upstart cannot close stderr when booting md from GPT partition table? grub2 problem?

regards

Signature · 3 lines
Mariusz Bialonczyk
jabber/e-mail: [email protected]
http://manio.skyboo.net
#3 lore raw
Quoted 3 lines · Mariusz Bialonczyk

Sorry for little off-topic question: Maybe you know why sysvinit and upstart cannot close stderr when booting md from GPT partition table? grub2 problem?

everything is now clear
i was doing rsync with -x when copying data - so /dev nodes was not copied because /dev was mounted as tmpfs - so as a result i have empty /dev directory on /dev/md0 (boot partition)

regards,

Signature · 3 lines
Mariusz Bialonczyk
jabber/e-mail: [email protected]
http://manio.skyboo.net