sam9m10g45ek: use the right machine id
PATCH 1/1 sam9m10g45ek: use the right machine id
today the board use 2 machines id AT91SAM9G45EKES and AT91SAM9M10G45EK now will use only AT91SAM9M10G45EK
the other boards revision will be specified via system_rev as done for the 9g20ek
for 9g45ekes, m10g45ekes and m10g45ek boards and revisions
Signed-off-by Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
Cc Nicolas Ferre <[email protected]>
Cc Patrice Vilchez <[email protected]>
--- arch/arm/mach-at91/Kconfig | 4 ++-- arch/arm/mach-at91/Makefile | 2 +- arch/arm/mach-at91/board-sam9m10g45ek.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-)
arch/arm/mach-at91/Kconfig +2 -2
@@ -384,8 +384,8 @@ if ARCH_AT91SAM9G45 comment "AT91SAM9G45 Board Type" -config MACH_AT91SAM9G45EKES - bool "Atmel AT91SAM9G45-EKES Evaluation Kit" +config MACH_AT91SAM9M10G45EK + bool "Atmel AT91SAM9M10G45-EK Evaluation Kits" select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
arch/arm/mach-at91/Makefile +1 -1
@@ -68,7 +68,7 @@ obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o # AT91SAM9G45 board-specific support -obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o +obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o # AT91CAP9 board-specific support obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o
arch/arm/mach-at91/board-sam9m10g45ek.c +1 -1
@@ -399,7 +399,7 @@ static void __init ek_board_init(void)at91_pwm_leds (ek_pwm_led,ARRAY_SIZE (ek_pwm_led)); } -MACHINE_START (AT91SAM9G45EKES ,"Atmel AT91SAM9G45-EKES" ) +MACHINE_START (AT91SAM9M10G45EK ,"Atmel AT91SAM9M10G45-EK" )/* Maintainer: Atmel */ .phys_io = AT91_BASE_SYS, .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
Signature · 1 line
1.7.1
PATCH 1/1 sam9m10g45ek: use the right machine id
Le 22/09/2010 07:55, Jean-Christophe PLAGNIOL-VILLARD :
Quoted 11 lines
today the board use 2 machines id AT91SAM9G45EKES and AT91SAM9M10G45EK now will use only AT91SAM9M10G45EK
the other boards revision will be specified via
system_revas done for the 9g20ekfor 9g45ekes, m10g45ekes and m10g45ek boards and revisions
Signed-off-by Jean-Christophe PLAGNIOL-VILLARD <[email protected]>Cc Nicolas Ferre <[email protected]>Cc Patrice Vilchez <[email protected]>
Acked-by Nicolas Ferre <[email protected]>
Quoted 47 lines
--- arch/arm/mach-at91/Kconfig | 4 ++-- arch/arm/mach-at91/Makefile | 2 +- arch/arm/mach-at91/board-sam9m10g45ek.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-)arch/arm/mach-at91/Kconfig +2
-2@@ -384,8 +384,8 @@ if ARCH_AT91SAM9G45 comment "AT91SAM9G45 Board Type" -config MACH_AT91SAM9G45EKES - bool "Atmel AT91SAM9G45-EKES Evaluation Kit" +config MACH_AT91SAM9M10G45EK + bool "Atmel AT91SAM9M10G45-EK Evaluation Kits" select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.arch/arm/mach-at91/Makefile +1
-1@@ -68,7 +68,7 @@ obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o # AT91SAM9G45 board-specific support -obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o +obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o # AT91CAP9 board-specific support obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.oarch/arm/mach-at91/board-sam9m10g45ek.c +1
-1@@ -399,7 +399,7 @@ static void __init ek_board_init(void)at91_pwm_leds (ek_pwm_led,ARRAY_SIZE (ek_pwm_led)); } -MACHINE_START (AT91SAM9G45EKES ,"Atmel AT91SAM9G45-EKES" ) +MACHINE_START (AT91SAM9M10G45EK ,"Atmel AT91SAM9M10G45-EK" )/* Maintainer: Atmel */ .phys_io = AT91_BASE_SYS, .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
Signature · 1 line
Nicolas Ferre