Skip to contentSkip to conversation

Add support to download Lattice's FPGA

U-Boot Superseded Stefano Babic 2 participants 10 messages Oct 7, 2010 – Oct 18, 2010

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

This patch incorporates the Lattice's tool ispVM EMBEDDED (see http://www.latticesemi.com) to download a new bitstream to Lattice's FPGA using using the commands "fpga load" already provided by u-boot.

The file to be downloaded must be converted in binary format from the original SVF file. Documentation is provided inside the ispVM Tools.

#1 lore raw

PATCH 1/3 FPGA: add support for downloading Lattice bitstream

The patch adds support to load a Lattice's bitstream image (called VME file) into a Lattice FPGA. The code containing the state machine delivered as part of Lattice's ispVMtools is integrated.

The FPGA is programmed using the JTAG interface. The board maintainer must provide accessors to drive the JTAG signals TCK, TMS, TDI and to get the value of the input signal TDO.

---
 drivers/fpga/Makefile   |    1 +
 drivers/fpga/fpga.c     |   11 +
 drivers/fpga/ivm_core.c | 3166 +++++++++++++++++++++++++++++++++++++++++++++++
 drivers/fpga/lattice.c  |  399 ++++++
 include/fpga.h          |    1 +
 include/lattice.h       |  317 +++++
 6 files changed, 3895 insertions(+), 0 deletions(-)
 create mode 100755 drivers/fpga/ivm_core.c
 create mode 100644 drivers/fpga/lattice.c
 create mode 100755 include/lattice.h
drivers/fpga/Makefile +1 -0
index 52d8e24..9ecdc5e 100644
@@ -31,6 +31,7 @@ COBJS-$(CONFIG_FPGA_SPARTAN2) += spartan2.o
 COBJS-$(CONFIG_FPGA_SPARTAN3) += spartan3.o
 COBJS-$(CONFIG_FPGA_VIRTEX2) += virtex2.o
 COBJS-$(CONFIG_FPGA_XILINX) += xilinx.o
+COBJS-$(CONFIG_FPGA_LATTICE) += ivm_core.o lattice.o
 ifdef CONFIG_FPGA_ALTERA
 COBJS-y += altera.o
 COBJS-$(CONFIG_FPGA_ACEX1K) += ACEX1K.o
drivers/fpga/fpga.c +11 -0
index 5659517..e41e728 100644
@@ -28,6 +28,7 @@
 #include <common.h>             /* core U-Boot definitions */
 #include <xilinx.h>             /* xilinx specific definitions */
 #include <altera.h>             /* altera specific definitions */
+#include <lattice.h>
 
 #if 0
 #define FPGA_DEBUG              /* define FPGA_DEBUG to get debug messages */
@@ -139,6 +140,10 @@ static int fpga_dev_info( int devnum )
 			fpga_no_sup( (char *)__FUNCTION__, "Altera devices" );
 #endif
 			break;
+		case fpga_lattice:
+			printf("Lattice Device\nDescriptor @ 0x%p\n", desc);
+			ret_val = lattice_info(desc->devdesc);
+			break;
 		default:
 			printf( "%s: Invalid or unsupported device type %d\n",
 					__FUNCTION__, desc->devtype );
@@ -224,6 +229,9 @@ int fpga_load( int devnum, void *buf, size_t bsize )
 			fpga_no_sup( (char *)__FUNCTION__, "Altera devices" );
 #endif
 			break;
+		case fpga_lattice:
+			ret_val = lattice_load(desc->devdesc, buf, bsize);
+			break;
 		default:
 			printf( "%s: Invalid or unsupported device type %d\n",
 				__FUNCTION__, desc->devtype );
@@ -257,6 +265,9 @@ int fpga_dump( int devnum, void *buf, size_t bsize )
 			fpga_no_sup( (char *)__FUNCTION__, "Altera devices" );
 #endif
 			break;
+		case fpga_lattice:
+			ret_val = lattice_dump(desc->devdesc, buf, bsize);
+			break;
 		default:
 			printf( "%s: Invalid or unsupported device type %d\n",
 				__FUNCTION__, desc->devtype );
drivers/fpga/ivm_core.c new file +3166 -0

2,958 lines not on this page · raw message

drivers/fpga/lattice.c new file +399 -0

399 lines not on this page · raw message

include/fpga.h +1 -0
index 84d7b9f..ac24f2b 100644

Lines of this file are not shown. View the raw message.

include/lattice.h new file +317 -0

317 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Signature · 1 line
1.6.3.3

Part of the diff is not shown here. View the raw message.

#2 lore raw

PATCH 2/3 MX31: Adding missing iomux pin to MX.31 registers

---
 arch/arm/include/asm/arch-mx31/mx31-regs.h |    7 +++++++
 1 files changed, 7 insertions(+), 0 deletions(-)
arch/arm/include/asm/arch-mx31/mx31-regs.h +7 -0
index f05e743..7a98d1c 100644
@@ -214,6 +214,10 @@ struct gpio_regs {
 #define MUX_CTL_CSPI1_MISO	0x8d
 #define MUX_CTL_CSPI1_SS0	0x8e
 #define MUX_CTL_CSPI1_SS1	0x8f
+#define MUX_CTL_STXD6		0x90
+#define MUX_CTL_SRXD6		0x91
+#define MUX_CTL_SCK6		0x92
+#define MUX_CTL_SFS6		0x93
 
 #define MUX_CTL_NFC_WP		0xD0
 #define MUX_CTL_NFC_CE		0xD1
@@ -224,6 +228,9 @@ struct gpio_regs {
 #define MUX_CTL_NFC_CLE		0xD7
 
 
+#define MUX_CTL_CAPTURE		0x150
+#define MUX_CTL_COMPARE		0x151
+
 /*
  * Helper macros for the MUX_[contact name]__[pin function] macros
  */
Signature · 1 line
1.6.3.3
#3 lore raw

PATCH 3/3 MX31: Add support to update FPGA bitstream

The patch adds the possibility to update the QONG FPGA (a Lattice XP2-5E) with u-boot using some GPIOs to drive the JTAG interface.

---
 board/davedenx/qong/Makefile    |    2 +-
 board/davedenx/qong/fpga.c      |   95 +++++++++++++++++++++++++++++++++++++++
 board/davedenx/qong/qong.c      |   11 +++++
 board/davedenx/qong/qong_fpga.h |    3 +-
 include/configs/qong.h          |    3 +
 5 files changed, 111 insertions(+), 3 deletions(-)
 create mode 100644 board/davedenx/qong/fpga.c
board/davedenx/qong/Makefile +1 -1
index 93e1985..ada6e03 100644
@@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	:= qong.o
+COBJS	:= qong.o fpga.o
 SOBJS	:= lowlevel_init.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
board/davedenx/qong/fpga.c new file +95 -0

95 lines not on this page · raw message

board/davedenx/qong/qong.c +11 -0
index 9abc29c..efeb0bb 100644
@@ -73,6 +73,15 @@ int board_early_init_f (void)
 	/* set interrupt pin as input */
 	mxc_gpio_direction(QONG_FPGA_IRQ_PIN, MXC_GPIO_DIRECTION_IN);
 
+	/* FPGA JTAG Interface */
+	mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SFS6, MUX_CTL_GPIO));
+	mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SCK6, MUX_CTL_GPIO));
+	mx31_gpio_mux(IOMUX_MODE(MUX_CTL_CAPTURE, MUX_CTL_GPIO));
+	mx31_gpio_mux(IOMUX_MODE(MUX_CTL_COMPARE, MUX_CTL_GPIO));
+	mxc_gpio_direction(QONG_FPGA_TCK_PIN, MXC_GPIO_DIRECTION_OUT);
+	mxc_gpio_direction(QONG_FPGA_TMS_PIN, MXC_GPIO_DIRECTION_OUT);
+	mxc_gpio_direction(QONG_FPGA_TDI_PIN, MXC_GPIO_DIRECTION_OUT);
+	mxc_gpio_direction(QONG_FPGA_TDO_PIN, MXC_GPIO_DIRECTION_IN);
 #endif
 
 	/* setup pins for UART1 */
@@ -146,6 +155,8 @@ int board_init (void)
 	gd->bd->bi_arch_number = MACH_TYPE_QONG;
 	gd->bd->bi_boot_params = (0x80000100);	/* adress of boot parameters */
 
+	qong_fpga_init();
+
 	return 0;
 }
 
board/davedenx/qong/qong_fpga.h +1 -2
index 4e11f5a..4e79ac2 100644
@@ -24,7 +24,6 @@
 #ifndef QONG_FPGA_H
 #define QONG_FPGA_H
 
-#ifdef CONFIG_QONG_FPGA
 #define QONG_FPGA_CTRL_BASE		CONFIG_FPGA_BASE
 #define QONG_FPGA_CTRL_VERSION		(QONG_FPGA_CTRL_BASE + 0x00000000)
 #define QONG_FPGA_PERIPH_SIZE		(1 << 24)
@@ -35,6 +34,6 @@
 #define	QONG_FPGA_TDO_PIN		7
 #define	QONG_FPGA_RST_PIN		48
 #define	QONG_FPGA_IRQ_PIN		40
-#endif
 
+int qong_fpga_init(void);
 #endif /* QONG_FPGA_H */
include/configs/qong.h +3 -0
index 7cd9558..2d124ea 100644
@@ -66,8 +66,11 @@
 #define CONFIG_FSL_PMIC_MODE	(SPI_MODE_2 | SPI_CS_HIGH)
 
 /* FPGA */
+#define CONFIG_FPGA
 #define CONFIG_QONG_FPGA	1
 #define CONFIG_FPGA_BASE	(CS1_BASE)
+#define CONFIG_FPGA_LATTICE
+#define CONFIG_FPGA_COUNT	1
 
 #ifdef CONFIG_QONG_FPGA
 /* Ethernet */
Signature · 1 line
1.6.3.3
#4 lore raw

PATCH 1/3 FPGA: add support for downloading Lattice bitstream

In reply to Stefano Babic

Dear Stefano Babic,

Quoted 9 lines · In message <[email protected]> you wrote:

The patch adds support to load a Lattice's bitstream image (called VME file) into a Lattice FPGA. The code containing the state machine delivered as part of Lattice's ispVMtools is integrated.

The FPGA is programmed using the JTAG interface. The board maintainer must provide accessors to drive the JTAG signals TCK, TMS, TDI and to get the value of the input signal TDO.

...

Quoted 6 lines
drivers/fpga/ivm_core.c new file +0 -0
new file mode 100755
index 0000000..ae43ac7

drivers/fpga/ivm_core.c line 8

Quoted 8 lines
drivers/fpga/ivm_core.c new file +8 -0
@@ -0,0 +1,3166 @@
+/*
+ * (C) Copyright 2010
+ * Stefano Babic, DENX Software Engineering, sbabic at denx.de.
+ *
+ * Porting to u-boot of Lattice ispVME Embedded to
+ * load Lattice's FPGA:
+ *
+ * Copyright 2009 Lattice Semiconductor Corp.

I read this such that Lattice Semiconductor did the porting to U-Boot, but is this correct? I though you did that? In that case you probably want to write something like:

Porting to U-Boot:

(C) Copyright 2010
Stefano Babic, DENX Software Engineering, sbabic at denx.de.

Lattice ispVME Embedded code to load Lattice's FPGA:

Copyright 2009 Lattice Semiconductor Corp.

or so?

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Any time things appear to be going better, you have overlooked  some-
thing.
#5 lore raw

PATCH 1/3 FPGA: add support for downloading Lattice bitstream

Quoted 2 lines · Wolfgang Denk

Dear Stefano Babic,

Hi Wolfgang,

Quoted 16 lines

drivers/fpga/ivm_core.c line 8

Quoted 9 lines
drivers/fpga/ivm_core.c new file +8 -0
@@ -0,0 +1,3166 @@
+/*
+ * (C) Copyright 2010
+ * Stefano Babic, DENX Software Engineering, sbabic at denx.de.
+ *
+ * Porting to u-boot of Lattice ispVME Embedded to
+ * load Lattice's FPGA:
+ *
+ * Copyright 2009 Lattice Semiconductor Corp.

I read this such that Lattice Semiconductor did the porting to U-Boot, but is this correct? I though you did that? In that case you probably want to write something like:

Porting to U-Boot:

Quoted 8 lines

(C) Copyright 2010
Stefano Babic, DENX Software Engineering, sbabic at denx.de.

Lattice ispVME Embedded code to load Lattice's FPGA:

Copyright 2009 Lattice Semiconductor Corp.

or so?

That is correct. I wanted only to state that the original code comes from Lattice, but I was not clear enough in the statement. I will post the patch again ;-)

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================
#6 lore raw

PATCH 1/3 FPGA: add support for downloading Lattice bitstream

In reply to Stefano Babic

The patch adds support to load a Lattice's bitstream image (called VME file) into a Lattice FPGA. The code containing the state machine delivered as part of Lattice's ispVMtools is integrated.

The FPGA is programmed using the JTAG interface. The board maintainer must provide accessors to drive the JTAG signals TCK, TMS, TDI and to get the value of the input signal TDO.

---
 drivers/fpga/Makefile   |    1 +
 drivers/fpga/fpga.c     |   11 +
 drivers/fpga/ivm_core.c | 3167 +++++++++++++++++++++++++++++++++++++++++++++++
 drivers/fpga/lattice.c  |  399 ++++++
 include/fpga.h          |    1 +
 include/lattice.h       |  319 +++++
 6 files changed, 3898 insertions(+), 0 deletions(-)
 create mode 100755 drivers/fpga/ivm_core.c
 create mode 100644 drivers/fpga/lattice.c
 create mode 100755 include/lattice.h
drivers/fpga/Makefile +1 -0
index 52d8e24..9ecdc5e 100644
@@ -31,6 +31,7 @@ COBJS-$(CONFIG_FPGA_SPARTAN2) += spartan2.o
 COBJS-$(CONFIG_FPGA_SPARTAN3) += spartan3.o
 COBJS-$(CONFIG_FPGA_VIRTEX2) += virtex2.o
 COBJS-$(CONFIG_FPGA_XILINX) += xilinx.o
+COBJS-$(CONFIG_FPGA_LATTICE) += ivm_core.o lattice.o
 ifdef CONFIG_FPGA_ALTERA
 COBJS-y += altera.o
 COBJS-$(CONFIG_FPGA_ACEX1K) += ACEX1K.o
drivers/fpga/fpga.c +11 -0
index 5659517..e41e728 100644
@@ -28,6 +28,7 @@
 #include <common.h>             /* core U-Boot definitions */
 #include <xilinx.h>             /* xilinx specific definitions */
 #include <altera.h>             /* altera specific definitions */
+#include <lattice.h>
 
 #if 0
 #define FPGA_DEBUG              /* define FPGA_DEBUG to get debug messages */
@@ -139,6 +140,10 @@ static int fpga_dev_info( int devnum )
 			fpga_no_sup( (char *)__FUNCTION__, "Altera devices" );
 #endif
 			break;
+		case fpga_lattice:
+			printf("Lattice Device\nDescriptor @ 0x%p\n", desc);
+			ret_val = lattice_info(desc->devdesc);
+			break;
 		default:
 			printf( "%s: Invalid or unsupported device type %d\n",
 					__FUNCTION__, desc->devtype );
@@ -224,6 +229,9 @@ int fpga_load( int devnum, void *buf, size_t bsize )
 			fpga_no_sup( (char *)__FUNCTION__, "Altera devices" );
 #endif
 			break;
+		case fpga_lattice:
+			ret_val = lattice_load(desc->devdesc, buf, bsize);
+			break;
 		default:
 			printf( "%s: Invalid or unsupported device type %d\n",
 				__FUNCTION__, desc->devtype );
@@ -257,6 +265,9 @@ int fpga_dump( int devnum, void *buf, size_t bsize )
 			fpga_no_sup( (char *)__FUNCTION__, "Altera devices" );
 #endif
 			break;
+		case fpga_lattice:
+			ret_val = lattice_dump(desc->devdesc, buf, bsize);
+			break;
 		default:
 			printf( "%s: Invalid or unsupported device type %d\n",
 				__FUNCTION__, desc->devtype );
drivers/fpga/ivm_core.c new file +3167 -0

2,958 lines not on this page · raw message

drivers/fpga/lattice.c new file +399 -0

399 lines not on this page · raw message

include/fpga.h +1 -0
index 84d7b9f..ac24f2b 100644

Lines of this file are not shown. View the raw message.

include/lattice.h new file +319 -0

319 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Signature · 1 line
1.6.3.3

Part of the diff is not shown here. View the raw message.

#7 lore raw

PATCH v2 1/3 FPGA: add support for downloading Lattice bitstream

In reply to Stefano Babic

The patch adds support to load a Lattice's bitstream image (called VME file) into a Lattice FPGA. The code containing the state machine delivered as part of Lattice's ispVMtools is integrated.

The FPGA is programmed using the JTAG interface. The board maintainer must provide accessors to drive the JTAG signals TCK, TMS, TDI and to get the value of the input signal TDO.

---

Changes since V1:
- corrected copyright notices

 drivers/fpga/Makefile   |    1 +
 drivers/fpga/fpga.c     |   11 +
 drivers/fpga/ivm_core.c | 3167 +++++++++++++++++++++++++++++++++++++++++++++++
 drivers/fpga/lattice.c  |  399 ++++++
 include/fpga.h          |    1 +
 include/lattice.h       |  319 +++++
 6 files changed, 3898 insertions(+), 0 deletions(-)
 create mode 100755 drivers/fpga/ivm_core.c
 create mode 100644 drivers/fpga/lattice.c
 create mode 100755 include/lattice.h
drivers/fpga/Makefile +1 -0
index 52d8e24..9ecdc5e 100644
@@ -31,6 +31,7 @@ COBJS-$(CONFIG_FPGA_SPARTAN2) += spartan2.o
 COBJS-$(CONFIG_FPGA_SPARTAN3) += spartan3.o
 COBJS-$(CONFIG_FPGA_VIRTEX2) += virtex2.o
 COBJS-$(CONFIG_FPGA_XILINX) += xilinx.o
+COBJS-$(CONFIG_FPGA_LATTICE) += ivm_core.o lattice.o
 ifdef CONFIG_FPGA_ALTERA
 COBJS-y += altera.o
 COBJS-$(CONFIG_FPGA_ACEX1K) += ACEX1K.o
drivers/fpga/fpga.c +11 -0
index 5659517..e41e728 100644
@@ -28,6 +28,7 @@
 #include <common.h>             /* core U-Boot definitions */
 #include <xilinx.h>             /* xilinx specific definitions */
 #include <altera.h>             /* altera specific definitions */
+#include <lattice.h>
 
 #if 0
 #define FPGA_DEBUG              /* define FPGA_DEBUG to get debug messages */
@@ -139,6 +140,10 @@ static int fpga_dev_info( int devnum )
 			fpga_no_sup( (char *)__FUNCTION__, "Altera devices" );
 #endif
 			break;
+		case fpga_lattice:
+			printf("Lattice Device\nDescriptor @ 0x%p\n", desc);
+			ret_val = lattice_info(desc->devdesc);
+			break;
 		default:
 			printf( "%s: Invalid or unsupported device type %d\n",
 					__FUNCTION__, desc->devtype );
@@ -224,6 +229,9 @@ int fpga_load( int devnum, void *buf, size_t bsize )
 			fpga_no_sup( (char *)__FUNCTION__, "Altera devices" );
 #endif
 			break;
+		case fpga_lattice:
+			ret_val = lattice_load(desc->devdesc, buf, bsize);
+			break;
 		default:
 			printf( "%s: Invalid or unsupported device type %d\n",
 				__FUNCTION__, desc->devtype );
@@ -257,6 +265,9 @@ int fpga_dump( int devnum, void *buf, size_t bsize )
 			fpga_no_sup( (char *)__FUNCTION__, "Altera devices" );
 #endif
 			break;
+		case fpga_lattice:
+			ret_val = lattice_dump(desc->devdesc, buf, bsize);
+			break;
 		default:
 			printf( "%s: Invalid or unsupported device type %d\n",
 				__FUNCTION__, desc->devtype );
drivers/fpga/ivm_core.c new file +3167 -0

2,958 lines not on this page · raw message

drivers/fpga/lattice.c new file +399 -0

399 lines not on this page · raw message

include/fpga.h +1 -0
index 84d7b9f..ac24f2b 100644

Lines of this file are not shown. View the raw message.

include/lattice.h new file +319 -0

319 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Signature · 1 line
1.6.3.3

Part of the diff is not shown here. View the raw message.

#8 lore raw

PATCH 1/1 FPGA: fix support for non-Lattice devices

In reply to Stefano Babic

Commit 3b8ac464 "FPGA: add support for downloading Lattice bitstream" added support for Lattice devices, but failed to add #ifdef's that are needed when building for non-Lattice devices, which results in build failures like these:

Configuring for GEN860T board...
drivers/fpga/libfpga.a(fpga.o): In function `fpga_dev_info':
/home/wd/git/u-boot/work/drivers/fpga/fpga.c:145: undefined reference to lattice_info' drivers/fpga/libfpga.a(fpga.o): In function fpga_dump':
/home/wd/git/u-boot/work/drivers/fpga/fpga.c:269: undefined reference to lattice_dump' drivers/fpga/libfpga.a(fpga.o): In function fpga_load':
/home/wd/git/u-boot/work/drivers/fpga/fpga.c:233: undefined reference to `lattice_load'
make: *** [u-boot] Error 1

Add the missing code.

---
 drivers/fpga/fpga.c |   12 ++++++++++++
 1 files changed, 12 insertions(+), 0 deletions(-)
drivers/fpga/fpga.c +12 -0
index e41e728..a669039 100644
@@ -141,8 +141,12 @@ static int fpga_dev_info( int devnum )
 #endif
 			break;
 		case fpga_lattice:
+#if defined(CONFIG_FPGA_LATTICE)
 			printf("Lattice Device\nDescriptor @ 0x%p\n", desc);
 			ret_val = lattice_info(desc->devdesc);
+#else
+			fpga_no_sup( (char *)__FUNCTION__, "Lattice devices" );
+#endif
 			break;
 		default:
 			printf( "%s: Invalid or unsupported device type %d\n",
@@ -230,7 +234,11 @@ int fpga_load( int devnum, void *buf, size_t bsize )
 #endif
 			break;
 		case fpga_lattice:
+#if defined(CONFIG_FPGA_LATTICE)
 			ret_val = lattice_load(desc->devdesc, buf, bsize);
+#else
+			fpga_no_sup( (char *)__FUNCTION__, "Lattice devices" );
+#endif
 			break;
 		default:
 			printf( "%s: Invalid or unsupported device type %d\n",
@@ -266,7 +274,11 @@ int fpga_dump( int devnum, void *buf, size_t bsize )
 #endif
 			break;
 		case fpga_lattice:
+#if defined(CONFIG_FPGA_LATTICE)
 			ret_val = lattice_dump(desc->devdesc, buf, bsize);
+#else
+			fpga_no_sup( (char *)__FUNCTION__, "Lattice devices" );
+#endif
 			break;
 		default:
 			printf( "%s: Invalid or unsupported device type %d\n",
Signature · 1 line
1.7.2.3
#9 lore raw

PATCH 1/1 FPGA: fix support for non-Lattice devices

Quoted 14 lines · In message <[email protected]> I wrote:

Commit 3b8ac464 "FPGA: add support for downloading Lattice bitstream" added support for Lattice devices, but failed to add #ifdef's that are needed when building for non-Lattice devices, which results in build failures like these:

Configuring for GEN860T board...
drivers/fpga/libfpga.a(fpga.o): In function `fpga_dev_info':
/home/wd/git/u-boot/work/drivers/fpga/fpga.c:145: undefined reference to lattice_info' drivers/fpga/libfpga.a(fpga.o): In function fpga_dump':
/home/wd/git/u-boot/work/drivers/fpga/fpga.c:269: undefined reference to lattice_dump' drivers/fpga/libfpga.a(fpga.o): In function fpga_load':
/home/wd/git/u-boot/work/drivers/fpga/fpga.c:233: undefined reference to `lattice_load'
make: *** [u-boot] Error 1

Quoted 7 lines

Add the missing code.

---
 drivers/fpga/fpga.c |   12 ++++++++++++
 1 files changed, 12 insertions(+), 0 deletions(-)

Applied.

Best regards,

Wolfgang Denk

Signature · 6 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
PoB = "Prisoner of Bill" -- those held captive, unwillingly or other-
wise, by the contemptible Microsoft monopoly.
         -- Tom Christiansen in <[email protected]>