Skip to contentSkip to conversation

PATCH: ftdi_sio new VID/PIDs for various Papouch devices

PATCH Daniel Suchy 2 participants 6 messages Oct 12, 2010

lore
Share & tools
lore
#0 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello,
in attached file, there's patch for FTDI USB serial converter adding new VID/PIDs used on various devices manufactured by Papouch
(http://www.papouch.com). These devices have their own VID/PID, although they're using standard FTDI chip. In ftdi_sio.c, I also made small cleanup to have declarations for all Papouch devices in single section.

My patch was tested against 2.6.35.x stable kernel releases at this time.

With regards,
Daniel Suchy
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)

iEYEARECAAYFAky0XioACgkQ0m6yQqKjWoLPJACeMuWvkNTXWTOc4s8hW5Fy3U3k 1+YAoNwbc3pYlSB734l3aSRO+Y+w12I5
=y+9A
-----END PGP SIGNATURE-----

usb/serial/ftdi_sio_ids.h renamed from usb/serial/ftdi_sio_ids.h.orig +27 -1
@@ -1007,12 +1007,38 @@
 /*
  * Papouch products (http://www.papouch.com/)
  * Submitted by Folkert van Heusden
+ * extended by Daniel Suchy (12.10.2010)
  */
 
 #define PAPOUCH_VID			0x5050	/* Vendor ID */
+#define PAPOUCH_SB485_PID		0x0100	/* Papouch SB485 USB-485/422 Converter */
+#define PAPOUCH_AP485_PID		0x0101	/* AP485 USB-RS485 Converter */
+#define PAPOUCH_SB422_PID		0x0102	/* Papouch SB422 USB-RS422 Converter  */
+#define PAPOUCH_SB485_2_PID		0x0103	/* Papouch SB485 USB-485/422 Converter */
+#define PAPOUCH_AP485_2_PID		0x0104	/* AP485 USB-RS485 Converter */
+#define PAPOUCH_SB422_2_PID		0x0105	/* Papouch SB422 USB-RS422 Converter  */
+#define PAPOUCH_SB485S_PID		0x0106	/* Papouch SB485S USB-485/422 Converter */
+#define PAPOUCH_SB485C_PID		0x0107	/* Papouch SB485C USB-485/422 Converter */
+#define PAPOUCH_LEC_PID			0x0300	/* LEC USB Converter */
+#define PAPOUCH_SB232_PID		0x0301	/* Papouch SB232 USB-RS232 Converter */
 #define PAPOUCH_TMU_PID			0x0400	/* TMU USB Thermometer */
-#define PAPOUCH_QUIDO4x4_PID		0x0900	/* Quido 4/4 Module */
+#define PAPOUCH_IRAMP_PID		0x0500	/* Papouch IRAmp Duplex */
+#define PAPOUCH_DRAK5_PID		0x0700	/* Papouch DRAK5 */
+#define PAPOUCH_QUIDO8x8_PID		0x0800	/* Papouch Quido 8/8 Module */
+#define PAPOUCH_QUIDO4x4_PID		0x0900	/* Papouch Quido 4/4 Module */
+#define PAPOUCH_QUIDO2x2_PID		0x0a00	/* Papouch Quido 2/2 Module */
+#define PAPOUCH_QUIDO10x1_PID		0x0b00	/* Papouch Quido 10/1 Module */
+#define PAPOUCH_QUIDO30x3_PID		0x0c00	/* Papouch Quido 30/3 Module */
+#define PAPOUCH_QUIDO60x3_PID		0x0d00	/* Papouch Quido 60(100)/3 Module */
+#define PAPOUCH_QUIDO2x16_PID		0x0e00	/* Papouch Quido 2/16 Module */
+#define PAPOUCH_QUIDO3x32_PID		0x0f00	/* Papouch Quido 3/32 Module */
+#define PAPOUCH_DRAK6_PID		0x1000	/* Papouch DRAK6 */
+#define PAPOUCH_UPSUSB_PID		0x8000	/* Papouch UPS-USB adapter */
+#define PAPOUCH_MU_PID			0x8001	/* MU controller */
+#define PAPOUCH_SIMUKEY_PID		0x8002	/* Papouch SimuKey */
 #define PAPOUCH_AD4USB_PID		0x8003	/* AD4USB Measurement Module */
+#define PAPOUCH_GMUX_PID		0x8004	/* Papouch GOLIATH MUX */
+#define PAPOUCH_GMSR_PID		0x8005	/* Papouch GOLIATH MSR */
 
 /*
  * Marvell SheevaPlug
usb/serial/ftdi_sio.c renamed from usb/serial/ftdi_sio.c.orig +29 -1
@@ -674,7 +674,6 @@ static struct usb_device_id id_table_com
 	{ USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) },
 	{ USB_DEVICE(ICOM_ID1_VID, ICOM_ID1_PID) },
-	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) },
@@ -715,8 +714,37 @@ static struct usb_device_id id_table_com
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
 	{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
+
+	/* Papouch devices based on FTDI chip */
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_AP485_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB422_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485_2_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_AP485_2_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB422_2_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485S_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485C_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_LEC_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB232_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_IRAMP_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_DRAK5_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO8x8_PID) },
 	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO2x2_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO10x1_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO30x3_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO60x3_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO2x16_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO3x32_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_DRAK6_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_UPSUSB_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_MU_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SIMUKEY_PID) },
 	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_AD4USB_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_GMUX_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_GMSR_PID) },
+
 	{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
 	{ USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
#1 lore raw
Quoted 25 lines · Daniel Suchy

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello,
in attached file, there's patch for FTDI USB serial converter adding new VID/PIDs used on various devices manufactured by Papouch
(http://www.papouch.com). These devices have their own VID/PID, although they're using standard FTDI chip. In ftdi_sio.c, I also made small cleanup to have declarations for all Papouch devices in single section.

My patch was tested against 2.6.35.x stable kernel releases at this time.

With regards,
Daniel Suchy
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)

iEYEARECAAYFAky0XioACgkQ0m6yQqKjWoLPJACeMuWvkNTXWTOc4s8hW5Fy3U3k 1+YAoNwbc3pYlSB734l3aSRO+Y+w12I5
=y+9A
-----END PGP SIGNATURE-----

usb/serial/ftdi_sio_ids.h line 1010

Quoted 4 lines
usb/serial/ftdi_sio_ids.h renamed from usb/serial/ftdi_sio_ids.h.orig +1 -0
@@ -1007,12 +1007,38 @@
 /*
  * Papouch products (http://www.papouch.com/)
  * Submitted by Folkert van Heusden
+ * extended by Daniel Suchy (12.10.2010)

This is not needed, you get this information from the changelog information.

Care to take this line out, and add a "Signed-off-by:" line as per the Documentation/SubmittingPatches file? That's required for me to be able to accept the patch.

thanks,

greg k-h

#2 lore raw

Hello,
in attached file I'm provided updated patch with removed unnecessary comment.

Quoted 8 lines · Greg KH

On Tue, Oct 12, 2010 at 03:10:02PM +0200, Daniel Suchy wrote:
Hello,
in attached file, there's patch for FTDI USB serial converter adding new VID/PIDs used on various devices manufactured by Papouch
(http://www.papouch.com). These devices have their own VID/PID, although they're using standard FTDI chip. In ftdi_sio.c, I also made small cleanup to have declarations for all Papouch devices in single section.

Quoted 4 lines

My patch was tested against 2.6.35.x stable kernel releases at this time.

With regards,
Daniel Suchy

This is not needed, you get this information from the changelog information.

Care to take this line out, and add a "Signed-off-by:" line as per the Documentation/SubmittingPatches file? That's required for me to be able to accept the patch.

thanks,

greg k-h

usb/serial/ftdi_sio_ids.h renamed from usb/serial/ftdi_sio_ids.h.orig +26 -1
@@ -1010,9 +1010,34 @@
  */
 
 #define PAPOUCH_VID			0x5050	/* Vendor ID */
+#define PAPOUCH_SB485_PID		0x0100	/* Papouch SB485 USB-485/422 Converter */
+#define PAPOUCH_AP485_PID		0x0101	/* AP485 USB-RS485 Converter */
+#define PAPOUCH_SB422_PID		0x0102	/* Papouch SB422 USB-RS422 Converter  */
+#define PAPOUCH_SB485_2_PID		0x0103	/* Papouch SB485 USB-485/422 Converter */
+#define PAPOUCH_AP485_2_PID		0x0104	/* AP485 USB-RS485 Converter */
+#define PAPOUCH_SB422_2_PID		0x0105	/* Papouch SB422 USB-RS422 Converter  */
+#define PAPOUCH_SB485S_PID		0x0106	/* Papouch SB485S USB-485/422 Converter */
+#define PAPOUCH_SB485C_PID		0x0107	/* Papouch SB485C USB-485/422 Converter */
+#define PAPOUCH_LEC_PID			0x0300	/* LEC USB Converter */
+#define PAPOUCH_SB232_PID		0x0301	/* Papouch SB232 USB-RS232 Converter */
 #define PAPOUCH_TMU_PID			0x0400	/* TMU USB Thermometer */
-#define PAPOUCH_QUIDO4x4_PID		0x0900	/* Quido 4/4 Module */
+#define PAPOUCH_IRAMP_PID		0x0500	/* Papouch IRAmp Duplex */
+#define PAPOUCH_DRAK5_PID		0x0700	/* Papouch DRAK5 */
+#define PAPOUCH_QUIDO8x8_PID		0x0800	/* Papouch Quido 8/8 Module */
+#define PAPOUCH_QUIDO4x4_PID		0x0900	/* Papouch Quido 4/4 Module */
+#define PAPOUCH_QUIDO2x2_PID		0x0a00	/* Papouch Quido 2/2 Module */
+#define PAPOUCH_QUIDO10x1_PID		0x0b00	/* Papouch Quido 10/1 Module */
+#define PAPOUCH_QUIDO30x3_PID		0x0c00	/* Papouch Quido 30/3 Module */
+#define PAPOUCH_QUIDO60x3_PID		0x0d00	/* Papouch Quido 60(100)/3 Module */
+#define PAPOUCH_QUIDO2x16_PID		0x0e00	/* Papouch Quido 2/16 Module */
+#define PAPOUCH_QUIDO3x32_PID		0x0f00	/* Papouch Quido 3/32 Module */
+#define PAPOUCH_DRAK6_PID		0x1000	/* Papouch DRAK6 */
+#define PAPOUCH_UPSUSB_PID		0x8000	/* Papouch UPS-USB adapter */
+#define PAPOUCH_MU_PID			0x8001	/* MU controller */
+#define PAPOUCH_SIMUKEY_PID		0x8002	/* Papouch SimuKey */
 #define PAPOUCH_AD4USB_PID		0x8003	/* AD4USB Measurement Module */
+#define PAPOUCH_GMUX_PID		0x8004	/* Papouch GOLIATH MUX */
+#define PAPOUCH_GMSR_PID		0x8005	/* Papouch GOLIATH MSR */
 
 /*
  * Marvell SheevaPlug
usb/serial/ftdi_sio.c renamed from usb/serial/ftdi_sio.c.orig +29 -1
@@ -674,7 +674,6 @@ static struct usb_device_id id_table_com
 	{ USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) },
 	{ USB_DEVICE(ICOM_ID1_VID, ICOM_ID1_PID) },
-	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) },
@@ -715,8 +714,37 @@ static struct usb_device_id id_table_com
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
 	{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
+
+	/* Papouch devices based on FTDI chip */
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_AP485_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB422_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485_2_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_AP485_2_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB422_2_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485S_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485C_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_LEC_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB232_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_IRAMP_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_DRAK5_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO8x8_PID) },
 	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO2x2_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO10x1_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO30x3_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO60x3_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO2x16_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO3x32_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_DRAK6_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_UPSUSB_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_MU_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SIMUKEY_PID) },
 	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_AD4USB_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_GMUX_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_GMSR_PID) },
+
 	{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
 	{ USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
#3 lore raw
Quoted 5 lines · Daniel Suchy

Hello,
in attached file I'm provided updated patch with removed unnecessary comment.

Ah, so close :)

Care to resend the original paragraph that described the patch, and the patch itself, so I can apply it without having to edit the whole thing by hand?

Again, Documentation/SubmittingPatches should describe all of this.

Third times a charm?

thanks,

greg k-h

#4 lore raw

This patch for FTDI USB serial driver ads new VID/PIDs used on various devices manufactured by Papouch (http://www.papouch.com). These devices have their own VID/PID, although they're using standard FTDI chip. In ftdi_sio.c, I also made small cleanup to have declarations for all Papouch devices together.

usb/serial/ftdi_sio_ids.h renamed from usb/serial/ftdi_sio_ids.h.orig +26 -1
@@ -1010,9 +1010,34 @@
  */
 
 #define PAPOUCH_VID			0x5050	/* Vendor ID */
+#define PAPOUCH_SB485_PID		0x0100	/* Papouch SB485 USB-485/422 Converter */
+#define PAPOUCH_AP485_PID		0x0101	/* AP485 USB-RS485 Converter */
+#define PAPOUCH_SB422_PID		0x0102	/* Papouch SB422 USB-RS422 Converter  */
+#define PAPOUCH_SB485_2_PID		0x0103	/* Papouch SB485 USB-485/422 Converter */
+#define PAPOUCH_AP485_2_PID		0x0104	/* AP485 USB-RS485 Converter */
+#define PAPOUCH_SB422_2_PID		0x0105	/* Papouch SB422 USB-RS422 Converter  */
+#define PAPOUCH_SB485S_PID		0x0106	/* Papouch SB485S USB-485/422 Converter */
+#define PAPOUCH_SB485C_PID		0x0107	/* Papouch SB485C USB-485/422 Converter */
+#define PAPOUCH_LEC_PID			0x0300	/* LEC USB Converter */
+#define PAPOUCH_SB232_PID		0x0301	/* Papouch SB232 USB-RS232 Converter */
 #define PAPOUCH_TMU_PID			0x0400	/* TMU USB Thermometer */
-#define PAPOUCH_QUIDO4x4_PID		0x0900	/* Quido 4/4 Module */
+#define PAPOUCH_IRAMP_PID		0x0500	/* Papouch IRAmp Duplex */
+#define PAPOUCH_DRAK5_PID		0x0700	/* Papouch DRAK5 */
+#define PAPOUCH_QUIDO8x8_PID		0x0800	/* Papouch Quido 8/8 Module */
+#define PAPOUCH_QUIDO4x4_PID		0x0900	/* Papouch Quido 4/4 Module */
+#define PAPOUCH_QUIDO2x2_PID		0x0a00	/* Papouch Quido 2/2 Module */
+#define PAPOUCH_QUIDO10x1_PID		0x0b00	/* Papouch Quido 10/1 Module */
+#define PAPOUCH_QUIDO30x3_PID		0x0c00	/* Papouch Quido 30/3 Module */
+#define PAPOUCH_QUIDO60x3_PID		0x0d00	/* Papouch Quido 60(100)/3 Module */
+#define PAPOUCH_QUIDO2x16_PID		0x0e00	/* Papouch Quido 2/16 Module */
+#define PAPOUCH_QUIDO3x32_PID		0x0f00	/* Papouch Quido 3/32 Module */
+#define PAPOUCH_DRAK6_PID		0x1000	/* Papouch DRAK6 */
+#define PAPOUCH_UPSUSB_PID		0x8000	/* Papouch UPS-USB adapter */
+#define PAPOUCH_MU_PID			0x8001	/* MU controller */
+#define PAPOUCH_SIMUKEY_PID		0x8002	/* Papouch SimuKey */
 #define PAPOUCH_AD4USB_PID		0x8003	/* AD4USB Measurement Module */
+#define PAPOUCH_GMUX_PID		0x8004	/* Papouch GOLIATH MUX */
+#define PAPOUCH_GMSR_PID		0x8005	/* Papouch GOLIATH MSR */
 
 /*
  * Marvell SheevaPlug
usb/serial/ftdi_sio.c renamed from usb/serial/ftdi_sio.c.orig +29 -1
@@ -674,7 +674,6 @@ static struct usb_device_id id_table_com
 	{ USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) },
 	{ USB_DEVICE(ICOM_ID1_VID, ICOM_ID1_PID) },
-	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) },
@@ -715,8 +714,37 @@ static struct usb_device_id id_table_com
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
 	{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
+
+	/* Papouch devices based on FTDI chip */
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_AP485_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB422_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485_2_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_AP485_2_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB422_2_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485S_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485C_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_LEC_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB232_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_IRAMP_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_DRAK5_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO8x8_PID) },
 	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO2x2_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO10x1_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO30x3_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO60x3_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO2x16_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO3x32_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_DRAK6_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_UPSUSB_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_MU_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SIMUKEY_PID) },
 	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_AD4USB_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_GMUX_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_GMSR_PID) },
+
 	{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
 	{ USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
#5 lore raw
Quoted 7 lines · Daniel Suchy

This patch for FTDI USB serial driver ads new VID/PIDs used on various devices manufactured by Papouch (http://www.papouch.com). These devices have their own VID/PID, although they're using standard FTDI chip. In ftdi_sio.c, I also made small cleanup to have declarations for all Papouch devices together.

Yeah!

Nice job, I'll queue this up in a few days for the next release.

greg k-h