Skip to contentSkip to conversation

Pull request: u-boot-imx

GIT PULL Applied Stefano Babic 2 participants 2 messages Oct 14, 2010 – Oct 17, 2010

lore
Share & tools
lore
#0 lore raw

Hi Wolfgang,

please pull from u-boot-imx

The following changes since commit e79f48393dd919079b34f37957c933f8e75c164d:
Lei Wen (1):
env_mmc: fix cannot save env issue

are available in the git repository at:

git://git.denx.de/u-boot-imx master

Loic Minier (1):
mx51evk: add u-boot.imx to ALL target

Stefano Babic (6):
FPGA: add support for downloading Lattice bitstream
MX31: Adding missing iomux pin to MX.31 registers
MX31: Add support to update FPGA bitstream
MX31: add support for setting pin pads
MX31: Add support for MXC EHCI controller
MX31: Add USB Host support to the QONG board

 arch/arm/cpu/arm1136/mx31/generic.c        |   17 +
 arch/arm/include/asm/arch-mx31/mx31-regs.h |  411 ++++
 board/davedenx/qong/Makefile               |    2 +-
 board/davedenx/qong/fpga.c                 |   95 +
 board/davedenx/qong/qong.c                 |   44 +
 board/davedenx/qong/qong_fpga.h            |    3 +-
 board/freescale/mx51evk/config.mk          |    1 +
 drivers/fpga/Makefile                      |    1 +
 drivers/fpga/fpga.c                        |   11 +
 drivers/fpga/ivm_core.c                    | 3167
++++++++++++++++++++++++++++
 drivers/fpga/lattice.c                     |  399 ++++
 drivers/usb/host/Makefile                  |    1 +
 drivers/usb/host/ehci-mxc.c                |  130 ++
 drivers/video/mx3fb.c                      |   31 -
 include/configs/qong.h                     |   21 +-
 include/fpga.h                             |    1 +
 include/lattice.h                          |  319 +++
 17 files changed, 4619 insertions(+), 35 deletions(-)
 create mode 100644 board/davedenx/qong/fpga.c
 create mode 100755 drivers/fpga/ivm_core.c
 create mode 100644 drivers/fpga/lattice.c
 create mode 100644 drivers/usb/host/ehci-mxc.c
 create mode 100755 include/lattice.h
Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================
#1 lore raw

Dear Stefano Babic,

Quoted 38 lines · In message <[email protected]> you wrote:

please pull from u-boot-imx

The following changes since commit e79f48393dd919079b34f37957c933f8e75c164d:
Lei Wen (1):
env_mmc: fix cannot save env issue

are available in the git repository at:

git://git.denx.de/u-boot-imx master

Loic Minier (1):
mx51evk: add u-boot.imx to ALL target

Stefano Babic (6):
FPGA: add support for downloading Lattice bitstream
MX31: Adding missing iomux pin to MX.31 registers
MX31: Add support to update FPGA bitstream
MX31: add support for setting pin pads
MX31: Add support for MXC EHCI controller
MX31: Add USB Host support to the QONG board

 arch/arm/cpu/arm1136/mx31/generic.c        |   17 +
 arch/arm/include/asm/arch-mx31/mx31-regs.h |  411 ++++
 board/davedenx/qong/Makefile               |    2 +-
 board/davedenx/qong/fpga.c                 |   95 +
 board/davedenx/qong/qong.c                 |   44 +
 board/davedenx/qong/qong_fpga.h            |    3 +-
 board/freescale/mx51evk/config.mk          |    1 +
 drivers/fpga/Makefile                      |    1 +
 drivers/fpga/fpga.c                        |   11 +
 drivers/fpga/ivm_core.c                    | 3167
++++++++++++++++++++++++++++
 drivers/fpga/lattice.c                     |  399 ++++
 drivers/usb/host/Makefile                  |    1 +
 drivers/usb/host/ehci-mxc.c                |  130 ++
 drivers/video/mx3fb.c                      |   31 -
 include/configs/qong.h                     |   21 +-
Quoted 8 lines
 include/fpga.h                             |    1 +
 include/lattice.h                          |  319 +++
 17 files changed, 4619 insertions(+), 35 deletions(-)
 create mode 100644 board/davedenx/qong/fpga.c
 create mode 100755 drivers/fpga/ivm_core.c
 create mode 100644 drivers/fpga/lattice.c
 create mode 100644 drivers/usb/host/ehci-mxc.c
 create mode 100755 include/lattice.h

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It would be illogical to assume that all conditions remain stable
	-- Spock, "The Enterprise" Incident", stardate 5027.3