of/flattree: Eliminate need to provide early_init_dt_scan_chosen_arch
Subsystems (4)
PATCH 1/2 of/flattree: Eliminate need to provide early_init_dt_scan_chosen_arch
This patch refactors the early init parsing of the chosen node so that architectures aren't forced to provide an empty implementation of early_init_dt_scan_chosen_arch. Instead, if an architecture wants to do something different, it can either use a wrapper function around early_init_dt_scan_chosen(), or it can replace it altogether.
This patch was written in preparation to adding device tree support to both x86 ad MIPS.
--- arch/microblaze/kernel/prom.c | 5 ----- arch/powerpc/kernel/prom.c | 12 ++++++++++-- drivers/of/fdt.c | 2 -- include/linux/of_fdt.h | 2 +- 4 files changed, 11 insertions(+), 10 deletions(-)
arch/microblaze/kernel/prom.c +0 -5
@@ -42,11 +42,6 @@#include <asm/sections.h> #include <asm/pci-bridge.h> -void __init early_init_dt_scan_chosen_arch (unsigned long node) -{ -/* No Microblaze specific code here */ -} -void __init early_init_dt_add_memory_arch (u64 base,u64 size) {memblock_add (base, size);
arch/powerpc/kernel/prom.c +10 -2
@@ -363,10 +363,15 @@ static int __init early_init_dt_scan_cpus(unsigned long node,return 0 ; } -void __init early_init_dt_scan_chosen_arch (unsigned long node) +int __init early_init_dt_scan_chosen_ppc (unsigned long node,const char *uname, +int depth,void *data) {unsigned long *lprop; +/* Use common scan routine to determine if this is the chosen node */ +if (early_init_dt_scan_chosen (node, uname, depth, data) ==0 ) +return 0 ; +#ifdef CONFIG_PPC64 /* check if iommu is forced on or off */ if (of_get_flat_dt_prop (node,"linux,iommu-off" ,NULL ) !=NULL )
@@ -398,6 +403,9 @@ void __init early_init_dt_scan_chosen_arch(unsigned long node)if (lprop) crashk_res.end = crashk_res.start + *lprop -1 ;#endif + +/* break now */ +return 1 ; }#ifdef CONFIG_PPC_PSERIES
@@ -679,7 +687,7 @@ void __init early_init_devtree(void *params)* device-tree, including the platform type, initrd location and * size, TCE reserve, and more ... */ -of_scan_flat_dt (early_init_dt_scan_chosen,NULL ); +of_scan_flat_dt (early_init_dt_scan_chosen_ppc,NULL );/* Scan memory nodes and rebuild MEMBLOCKs */ memblock_init ();
drivers/of/fdt.c +0 -2
@@ -533,8 +533,6 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname,strlcpy (cmd_line,CONFIG_CMDLINE ,COMMAND_LINE_SIZE );#endif /* CONFIG_CMDLINE */ -early_init_dt_scan_chosen_arch (node); -pr_debug ("Command line is: %s\n" , cmd_line);/* break now */
include/linux/of_fdt.h +1 -1
@@ -72,7 +72,7 @@ extern void *of_get_flat_dt_prop(unsigned long node, const char *name, unsigned long *size);extern int of_flat_dt_is_compatible (unsigned long node,const char *name);extern unsigned long of_get_flat_dt_root (void ); -extern void early_init_dt_scan_chosen_arch (unsigned long node); +extern int early_init_dt_scan_chosen (unsigned long node,const char *uname,int depth,void *data);extern void early_init_dt_check_for_initrd (unsigned long node);
A message that is not in the archive (sent off-list or not yet received): 20101013064352.2743.80378.stgit-bi+AKbBUZKagILUCTcTcHdKyNwTtLsGr@public.gmane.org
RFC PATCH 2/2 of/mips: Add device tree support to MIPS
From: Dezhong Diao <[email protected]>
Add the ability to enable CONFIG_OF on the MIPS architecture.
[grant.likely-s3s/[email protected]: cleared out obsolete hooks,
removed ARCH_HAS_DEVTREE_MEM from being manually selected, remove __init tags from header file]
---
I've not tested this on anything, but I picked up the MIPS device tree patch written by Dezhong and updated it to match the changes in mainline. I also half-heartedly tried to rebase the powertv support patch, didn't get very far due to the refactoring in arch/mips/powertv/memory.c
Anyway, please take a look and give it a spin. If it looks good, then I can add it into my -next branch.
g.
arch/mips/Kconfig | 13 ++++ arch/mips/include/asm/prom.h | 35 +++++++++++ arch/mips/kernel/Makefile | 2 + arch/mips/kernel/prom.c | 135 ++++++++++++++++++++++++++++++++++++++++++ arch/mips/kernel/setup.c | 2 + 5 files changed, 187 insertions(+), 0 deletions(-) create mode 100644 arch/mips/include/asm/prom.h create mode 100644 arch/mips/kernel/prom.c
arch/mips/Kconfig +13 -0
@@ -2107,6 +2107,19 @@ config SECCOMP If unsure, say Y. Only embedded should say N here. +config USE_OF + bool "Flattened Device Tree support" + select OF + select OF_FLATTREE + help + Include support for flattened device tree machine descriptions. + +config ARCH_HAS_DEVTREE_MEM + bool + depends on OF + help + The user has a customized function to parse memory nodes. + endmenu config LOCKDEP_SUPPORT
arch/mips/include/asm/prom.h new file +35 -0
@@ -0,0 +1,35 @@ +/* +* arch/mips/include/asm/prom.h +* +* Copyright (C) 2010 Cisco Systems Inc. <[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +* +*/ +#ifndef __ASM_MIPS_PROM_H +#define __ASM_MIPS_PROM_H + +#ifdef CONFIG_OF +#include <linux/init.h> + +#include <asm/setup.h> +#include <asm/irq.h> +#include <asm/bootinfo.h> + +/* which is compatible with the flattened device tree (FDT) */ +#define cmd_line arcs_cmdline + +extern int early_init_dt_scan_memory_arch (unsigned long node, +const char *uname,int depth,void *data); + +extern int reserve_mem_mach (unsigned long addr,unsigned long size); +extern void free_mem_mach (unsigned long addr,unsigned long size); + +extern void __init device_tree_init (void ); +#else /* CONFIG_OF */ +static inline void __init device_tree_init (void ) { } +#endif /* CONFIG_OF */ + +#endif /* _ASM_MIPS_PROM_H */
arch/mips/kernel/Makefile +2 -0
@@ -96,6 +96,8 @@ obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_SPINLOCK_TEST) += spinlock_test.o +obj-$(CONFIG_OF) += prom.o + CFLAGS_cpu-bugs64.o = $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi) obj-$(CONFIG_HAVE_STD_PC_SERIAL_PORT) += 8250-platform.o
arch/mips/kernel/prom.c new file +135 -0
135 lines not on this page · raw message
arch/mips/kernel/setup.c +2 -0
@@ -31,6 +31,7 @@#include <asm/setup.h> #include <asm/smp-ops.h> #include <asm/system.h> +#include <asm/prom.h> struct cpuinfo_mips cpu_data[NR_CPUS ]__read_mostly ;
@@ -487,6 +488,7 @@ static void __init arch_mem_init(char **cmdline_p) }bootmem_init (); +device_tree_init ();sparse_init ();paging_init (); }
Re: [PATCH 2/2 RFC] of/mips: Add device tree support to MIPS
Quoted 4 lines · Grant Likely
From: Dezhong Diao<[email protected]>
Add the ability to enable
CONFIG_OFon the MIPS architecture.
Quoted 8 lines
Signed-off-by Dezhong Diao<[email protected]>[[email protected]: cleared out obsolete hooks,
removedARCH_HAS_DEVTREE_MEMfrom being manually selected, remove__inittags from header file]Signed-off-by Grant Likely<[email protected]>Cc David Daney<[email protected]>Cc David VomLehn<[email protected]>
As I mentioned in my reply to 1/2, this seems to work,
Quoted 13 lines
---
I've not tested this on anything, but I picked up the MIPS device tree patch written by Dezhong and updated it to match the changes in mainline. I also half-heartedly tried to rebase the powertv support patch, didn't get very far due to the refactoring in
arch/mips/powertv/memory.cAnyway, please take a look and give it a spin. If it looks good, then I can add it into my -next branch.
g.
[...]
A message that is not in the archive (sent off-list or not yet received): 20101013064416.2743.42892.stgit-bi+AKbBUZKagILUCTcTcHdKyNwTtLsGr@public.gmane.org
Re: [PATCH 2/2 RFC] of/mips: Add device tree support to MIPS
Although I tested this patch, and it compiles, I have a few more comments now that I have studied it.
Basically, it looks like most of the code in arch/mips/kernel/prom.c is not generic to MIPS, but instead highly specific to some platform (perhaps PowerTV).
Quoted 47 lines · Grant Likely
From: Dezhong Diao<[email protected]>
Add the ability to enable
CONFIG_OFon the MIPS architecture.Signed-off-by Dezhong Diao<[email protected]>[grant.likely-s3s/[email protected]: cleared out obsolete hooks,
removedARCH_HAS_DEVTREE_MEMfrom being manually selected, remove__inittags from header file]Signed-off-by Grant Likely<grant.likely-s3s/[email protected]>Cc linux-mips-6z/[email protected]Cc David Daney<[email protected]>Cc David VomLehn<[email protected]>---
I've not tested this on anything, but I picked up the MIPS device tree patch written by Dezhong and updated it to match the changes in mainline. I also half-heartedly tried to rebase the powertv support patch, didn't get very far due to the refactoring in
arch/mips/powertv/memory.cAnyway, please take a look and give it a spin. If it looks good, then I can add it into my -next branch.
g.
arch/mips/Kconfig | 13 ++++ arch/mips/include/asm/prom.h | 35 +++++++++++ arch/mips/kernel/Makefile | 2 + arch/mips/kernel/prom.c | 135 ++++++++++++++++++++++++++++++++++++++++++ arch/mips/kernel/setup.c | 2 + 5 files changed, 187 insertions(+), 0 deletions(-)create mode 100644
arch/mips/include/asm/prom.h
create mode 100644arch/mips/kernel/prom.carch/mips/Kconfig +5
-0@@ -2107,6 +2107,19 @@ config SECCOMP If unsure, say Y. Only embedded should say N here. +config USE_OF + bool "Flattened Device Tree support" + select OF + select OF_FLATTREE + help
arch/mips/Kconfig config SECCOMP · line 2124
Quoted 10 lines
arch/mips/Kconfig +8
-0+ Include support for flattened device tree machine descriptions. + +config ARCH_HAS_DEVTREE_MEM + bool + depends on OF + help + The user has a customized function to parse memory nodes. + endmenu
These Kconfig items should only be selectable if OF is truly supported.
Hardwiring ARCH_HAS_DEVTREE_MEM to USE_OF at this global level
doesn't seem quite right either. I think it is conceivable that we would want USE_OF without ARCH_HAS_DEVTREE_MEM.
Quoted 131 lines
arch/mips/Kconfig +0
-0config LOCKDEP_SUPPORTarch/mips/include/asm/prom.h new file +35
-0@@ -0,0 +1,35 @@ +/* +* arch/mips/include/asm/prom.h +* +* Copyright (C) 2010 Cisco Systems Inc.<[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +* +*/ +#ifndef __ASM_MIPS_PROM_H +#define __ASM_MIPS_PROM_H + +#ifdef CONFIG_OF +#include <linux/init.h> + +#include <asm/setup.h> +#include <asm/irq.h> +#include <asm/bootinfo.h> + +/* which is compatible with the flattened device tree (FDT) */ +#define cmd_line arcs_cmdline + +extern int early_init_dt_scan_memory_arch (unsigned long node, +const char *uname,int depth,void *data); + +extern int reserve_mem_mach (unsigned long addr,unsigned long size); +extern void free_mem_mach (unsigned long addr,unsigned long size); + +extern void __init device_tree_init (void ); +#else /* CONFIG_OF */ +static inline void __init device_tree_init (void ) { } +#endif /* CONFIG_OF */ + +#endif /* _ASM_MIPS_PROM_H */ arch/mips/kernel/Makefile +2
-0@@ -96,6 +96,8 @@ obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_SPINLOCK_TEST) += spinlock_test.o +obj-$(CONFIG_OF) += prom.o + CFLAGS_cpu-bugs64.o = $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null>/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi) obj-$(CONFIG_HAVE_STD_PC_SERIAL_PORT) += 8250-platform.oarch/mips/kernel/prom.c new file +70
-0@@ -0,0 +1,135 @@ +/* +* linux/arch/mips/kernel/prom.c +* +* Copyright (C) 2010 Cisco Systems Inc.<[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/bootmem.h> +#include <linux/initrd.h> +#include <linux/debugfs.h> +#include <linux/of.h> +#include <linux/of_fdt.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> + +#include <asm/page.h> +#include <asm/prom.h> + +#ifndef CONFIG_ARCH_HAS_DEVTREE_MEM +int __init early_init_dt_scan_memory_arch (unsigned long node, +const char *uname,int depth, +void *data) +{ +return early_init_dt_scan_memory (node, uname, depth, data); +} + +void __init early_init_dt_add_memory_arch (u64 base,u64 size) +{ +return add_memory_region (base, size,BOOT_MEM_RAM ); +} + +int __init reserve_mem_mach (unsigned long addr,unsigned long size) +{ +return reserve_bootmem (addr, size,BOOTMEM_DEFAULT ); +} + +void __init free_mem_mach (unsigned long addr,unsigned long size) +{ +return free_bootmem (addr, size); +} +#endif + +u64 __init early_init_dt_alloc_memory_arch (u64 size,u64 align) +{ +return virt_to_phys ( +__alloc_bootmem (size, align,__pa (MAX_DMA_ADDRESS )) + ); +} + +#ifdef CONFIG_BLK_DEV_INITRD +void __init early_init_dt_setup_initrd_arch (unsigned long start, +unsigned long end) +{ + initrd_start = (unsigned long )__va (start); + initrd_end = (unsigned long )__va (end); + initrd_below_start_ok =1 ; +} +#endif + +/* +* irq_create_of_mapping - Hook to resolve OF irq specifier into a Linux irq# +* +* Currently the mapping mechanism is trivial; simple flat hwirq numbers are
arch/mips/kernel/prom.c line 80
Quoted 10 lines
arch/mips/kernel/prom.c new file +10
-0+* mapped 1:1 onto Linux irq numbers. Cascaded irq controllers are not +* supported. +*/ +unsigned int irq_create_of_mapping (struct device_node *controller, +const u32 *intspec,unsigned int intsize) +{ +return intspec[0 ]; +} +EXPORT_SYMBOL_GPL (irq_create_of_mapping); +
This mapping function depends on the interrupt controller architecture.
It is not at all a good fit for what I want to do on Octeon. We have
a hierarchy of interrupt mapping that is best described by a two level tree, so has '#interrupt-cells = <2>;'. We definitely need a different implementation than this.
Quoted 44 lines
arch/mips/kernel/prom.c new file +44
-0+void __init early_init_devtree (void *params) +{ +/* Setup flat device-tree pointer */ + initial_boot_params = params; + +/* Retrieve various informations from the /chosen node of the +* device-tree, including the platform type, initrd location and +* size, and more ... +*/ +of_scan_flat_dt (early_init_dt_scan_chosen,NULL ); + +/* Scan memory nodes */ +of_scan_flat_dt (early_init_dt_scan_root,NULL ); +of_scan_flat_dt (early_init_dt_scan_memory_arch,NULL ); +} + +void __init device_tree_init (void ) +{ +unsigned long base, size; + +if (!initial_boot_params) +return ; + + base =virt_to_phys ((void *)initial_boot_params); + size = initial_boot_params->totalsize; + +/* Before we do anything, lets reserve the dt blob */ +reserve_mem_mach (base, size); + +unflatten_device_tree (); + +/* free the space reserved for the dt blob */ +free_mem_mach (base, size); +} + +#if defined(CONFIG_DEBUG_FS )&& defined(DEBUG ) +static struct dentry *of_debugfs_root; +static struct debugfs_blob_wrapper flat_dt_blob; + +static int __init export_flat_device_tree (void ) +{ +struct dentry *d; + + flat_dt_blob.data = initial_boot_params;
arch/mips/kernel/prom.c line 134
Quoted 10 lines
arch/mips/kernel/prom.c new file +10
-0+ flat_dt_blob.size = initial_boot_params->totalsize; + + d =debugfs_create_blob ("flat-device-tree" ,S_IFREG |S_IRUSR , + of_debugfs_root,&flat_dt_blob); +if (!d) +return 1 ; + +return 0 ; +} +device_initcall (export_flat_device_tree);
This debugfs bit will fail. of_debugfs_root is never initialized that I can see.
Quoted 23 lines
arch/mips/kernel/prom.c new file +1
-0+#endif arch/mips/kernel/setup.c +2
-0@@ -31,6 +31,7 @@#include <asm/setup.h> #include <asm/smp-ops.h> #include <asm/system.h> +#include <asm/prom.h> struct cpuinfo_mips cpu_data[NR_CPUS ]__read_mostly ;@@ -487,6 +488,7 @@ static void __init arch_mem_init(char **cmdline_p) }bootmem_init (); +device_tree_init ();sparse_init ();paging_init (); }
A message that is not in the archive (sent off-list or not yet received): 4CBCB330.4090205-M3mlKVOIwJVv6pq1l3V1OdBPR1lH4CV8@public.gmane.org
Re: [PATCH 2/2 RFC] of/mips: Add device tree support to MIPS
Quoted 62 lines · David Daney
Although I tested this patch, and it compiles, I have a few more comments now that I have studied it.
Basically, it looks like most of the code in
arch/mips/kernel/prom.cis not generic to MIPS, but instead highly specific to some platform (perhaps PowerTV).Quoted 54 lines · Grant Likely
From: Dezhong Diao<[email protected]>
Add the ability to enable
CONFIG_OFon the MIPS architecture.Signed-off-by Dezhong Diao<[email protected]>[grant.likely-s3s/[email protected]: cleared out obsolete hooks,
removedARCH_HAS_DEVTREE_MEMfrom being manually selected, remove__inittags from header file]Signed-off-by Grant Likely<grant.likely-s3s/[email protected]>Cc linux-mips-6z/[email protected]Cc David Daney<[email protected]>Cc David VomLehn<[email protected]>---
I've not tested this on anything, but I picked up the MIPS device tree patch written by Dezhong and updated it to match the changes in mainline. I also half-heartedly tried to rebase the powertv support patch, didn't get very far due to the refactoring in
arch/mips/powertv/memory.cAnyway, please take a look and give it a spin. If it looks good, then I can add it into my -next branch.
g.
arch/mips/Kconfig | 13 ++++ arch/mips/include/asm/prom.h | 35 +++++++++++ arch/mips/kernel/Makefile | 2 + arch/mips/kernel/prom.c | 135 ++++++++++++++++++++++++++++++++++++++++++ arch/mips/kernel/setup.c | 2 + 5 files changed, 187 insertions(+), 0 deletions(-) create mode 100644 arch/mips/include/asm/prom.h create mode 100644 arch/mips/kernel/prom.carch/mips/Kconfig +12
-0@@ -2107,6 +2107,19 @@ config SECCOMP If unsure, say Y. Only embedded should say N here. +config USE_OF + bool "Flattened Device Tree support" + select OF + select OF_FLATTREE + help + Include support for flattened device tree machine descriptions. + +config ARCH_HAS_DEVTREE_MEM + bool + depends on OF + help + The user has a customized function to parse memory nodes.
Quoted 8 lines
arch/mips/Kconfig config SECCOMP · line 2124
Quoted 3 lines
arch/mips/Kconfig +1
-0+ endmenuThese
Kconfigitems should only be selectable if OF is truly supported. HardwiringARCH_HAS_DEVTREE_MEMtoUSE_OFat this global level doesn't seem quite right either. I think it is conceivable that we would wantUSE_OFwithoutARCH_HAS_DEVTREE_MEM.
Right. That ARCH_HAS_DEVTREE_MEM thing really shouldn't be in this patch since it is implemented only so that powertv can override them. Instead, it should be in another patch so it can be reviewed separately. I'll remove.
Quoted 5 lines
Quoted 5 lines
arch/mips/Kconfig +5
-0+unsigned int irq_create_of_mapping(struct device_node *controller, + const u32 *intspec, unsigned int intsize) +{ + return intspec[0]; +}
Quoted 9 lines
arch/mips/Kconfig
Quoted 2 lines
arch/mips/Kconfig +2
-0+EXPORT_SYMBOL_GPL(irq_create_of_mapping); +This mapping function depends on the interrupt controller architecture. It is not at all a good fit for what I want to do on Octeon. We have a hierarchy of interrupt mapping that is best described by a two level tree, so has '#interrupt-cells = <2>;'. We definitely need a different implementation than this.
All of the IRQ mapping infrastructure is the biggest current missing piece needed for the device tree architecture to be nicely cross platform. This map function is definitely a hack, but it is a stop gap until a port or write a cross architecture irq mapping code so that each irq controller can claim a different slice of the irq number space and be able to resolve it to interrupt-controller device tree nodes.
Quoted 49 lines
Quoted 49 lines
arch/mips/Kconfig +49
-0+void __init early_init_devtree(void *params) +{ + /* Setup flat device-tree pointer */ + initial_boot_params = params; + + /* Retrieve various informations from the /chosen node of the + * device-tree, including the platform type, initrd location and + * size, and more ... + */ + of_scan_flat_dt(early_init_dt_scan_chosen, NULL); + + /* Scan memory nodes */ + of_scan_flat_dt(early_init_dt_scan_root, NULL); + of_scan_flat_dt(early_init_dt_scan_memory_arch, NULL); +} + +void __init device_tree_init(void) +{ + unsigned long base, size; + + if (!initial_boot_params) + return; + + base = virt_to_phys((void *)initial_boot_params); + size = initial_boot_params->totalsize; + + /* Before we do anything, lets reserve the dt blob */ + reserve_mem_mach(base, size); + + unflatten_device_tree(); + + /* free the space reserved for the dt blob */ + free_mem_mach(base, size); +} + +#if defined(CONFIG_DEBUG_FS)&& defined(DEBUG) +static struct dentry *of_debugfs_root; +static struct debugfs_blob_wrapper flat_dt_blob; + +static int __init export_flat_device_tree(void) +{ + struct dentry *d; + + flat_dt_blob.data = initial_boot_params; + flat_dt_blob.size = initial_boot_params->totalsize; + + d = debugfs_create_blob("flat-device-tree", S_IFREG | S_IRUSR, + of_debugfs_root,&flat_dt_blob); + if (!d)
Quoted 8 lines
arch/mips/Kconfig
Quoted 5 lines
arch/mips/Kconfig +5
-0+ return 1; + + return 0; +} +device_initcall(export_flat_device_tree);This debugfs bit will fail.
of_debugfs_rootis never initialized that I can see.
I'm happy to drop the debugfs bits from this patch.
g.
Quoted 10 lines · Grant Likely
This patch refactors the early init parsing of the chosen node so that architectures aren't forced to provide an empty implementation of
early_init_dt_scan_chosen_arch. Instead, if an architecture wants to do something different, it can either use a wrapper function aroundearly_init_dt_scan_chosen(), or it can replace it altogether.This patch was written in preparation to adding device tree support to both x86 ad MIPS.
Signed-off-by Grant Likely<[email protected]>
In conjunction with my 'MIPS: Add some irq definitins required by OF' and the '2/2 of/mips: Add device tree support to MIPS' patches, I can enable CONFIG_USE_OF, and build and run a kernel on my Octeon. I haven't started using the device tree yet, but this is a good start.
You can add my...
Quoted 6 lines
--- arch/microblaze/kernel/prom.c | 5 ----- arch/powerpc/kernel/prom.c | 12 ++++++++++-- drivers/of/fdt.c | 2 -- include/linux/of_fdt.h | 2 +- 4 files changed, 11 insertions(+), 10 deletions(-)
[...]
A message that is not in the archive (sent off-list or not yet received): 4CB7713C.9040303-M3mlKVOIwJVv6pq1l3V1OdBPR1lH4CV8@public.gmane.org
Quoted 13 lines · David Daney
Quoted 11 lines · Grant Likely
This patch refactors the early init parsing of the chosen node so that architectures aren't forced to provide an empty implementation of
early_init_dt_scan_chosen_arch. Instead, if an architecture wants to do something different, it can either use a wrapper function aroundearly_init_dt_scan_chosen(), or it can replace it altogether.This patch was written in preparation to adding device tree support to both x86 ad MIPS.
Signed-off-by Grant Likely<grant.likely-s3s/[email protected]>
Quoted 8 lines
In conjunction with my 'MIPS: Add some irq definitins required by OF' and the '2/2 of/mips: Add device tree support to MIPS' patches, I can enable
CONFIG_USE_OF, and build and run a kernel on my Octeon. I haven't started using the device tree yet, but this is a good start.You can add my...
Tested-by David Daney <[email protected]>
Thanks David. I'll add your tags.
What do you think Ralf? Should I merge these two patches up for 2.6.37? As mentioned on my other reply, David's "MIPS: add some irq definitions required by OF" patch isn't needed in my current next-devicetree branch.
g.
Quoted 11 lines
Quoted 8 lines
---
arch/microblaze/kernel/prom.c | 5 -----arch/powerpc/kernel/prom.c| 12 ++++++++++--drivers/of/fdt.c| 2 --include/linux/of_fdt.h| 2 +-4 files changed, 11 insertions(+), 10 deletions(-)[...]
Signature · 2 lines
Grant Likely, B.Sc., P.Eng. Secret Lab Technologies Ltd.