QONG: fix and update board config file
PATCH 1/1 QONG: fix and update board config file
Fix flash memory map and other updates for QONG board:
- adjust/fix "kernel_addr" settings
- adjust/fix mtdparts NOR flash settings
- add mtdparts NAND flash mapping
- sort command list
- enable "setexpr" command
- enable ext2 support
- delete bogus comment
Signed-off-by Wolfgang Denk <[email protected]>
Cc Stefano Babic <[email protected]>
--- include/configs/qong.h | 32 ++++++++++++++------------------ 1 files changed, 14 insertions(+), 18 deletions(-)
include/configs/qong.h +14 -18
@@ -102,6 +102,7 @@#define CONFIG_USB_STORAGE #define CONFIG_DOS_PARTITION #define CONFIG_SUPPORT_VFAT +#define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT #endif /* CONFIG_CMD_USB */
@@ -124,25 +125,16 @@#include <config_cmd_default.h> #define CONFIG_CMD_CACHE -#define CONFIG_CMD_PING +#define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP -#define CONFIG_CMD_NET #define CONFIG_CMD_MII #define CONFIG_CMD_NAND +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_SETEXPR #define CONFIG_CMD_SPI -#define CONFIG_CMD_DATE -#define BOARD_LATE_INIT -/* -* You can compile in a MAC address and your custom net settings by using -* the following syntax. -* -* #define CONFIG_ETHADDR xx:xx:xx:xx:xx:xx -* #define CONFIG_SERVERIP <server ip> -* #define CONFIG_IPADDR <board ip> -* #define CONFIG_GATEWAYIP <gateway ip> -* #define CONFIG_NETMASK <your netmask> -*/ +#define BOARD_LATE_INIT #define CONFIG_BOOTDELAY 5
@@ -164,7 +156,7 @@"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \"addmisc=setenv bootargs ${bootargs}\0" \"uboot_addr=A0000000\0" \ -"kernel_addr=A00A0000\0" \ +"kernel_addr=A00C0000\0" \"ramdisk_addr=A0300000\0" \"u-boot=qong/u-boot.bin\0" \"kernel_addr_r=80800000\0" \
@@ -296,10 +288,14 @@ extern int qong_nand_rdy(void *chip);#define CONFIG_LZO #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ #define CONFIG_FLASH_CFI_MTD -#define MTDIDS_DEFAULT "nor0=physmap-flash.0" +#define MTDIDS_DEFAULT "nor0=physmap-flash.0," \ + "nand0=gen_nand"#define MTDPARTS_DEFAULT \ - "mtdparts=physmap-flash.0:384k(U-Boot),128k(env1)," \ - "128k(env2),2432k(kernel),13m(ramdisk),-(user)" + "mtdparts=physmap-flash.0:" \ + "512k(U-Boot),128k(env1),128k(env2)," \ + "2304k(kernel),13m(ramdisk),-(user);" \ + "gen_nand:" \ + "128m(nand)"/* additions for new relocation code, must be added to all boards */ #define CONFIG_SYS_SDRAM_BASE 0x80000000
Signature · 1 line
1.7.2.3
PATCH 1/1 QONG: fix and update board config file
Quoted 10 lines · Wolfgang Denk
Fix flash memory map and other updates for QONG board:
- adjust/fix "
kernel_addr" settings
- adjust/fix mtdparts NOR flash settings
- add mtdparts NAND flash mapping
- sort command list
- enable "setexpr" command
- enable ext2 support
- delete bogus comment
Quoted 2 lines
Signed-off-by Wolfgang Denk <[email protected]>Cc Stefano Babic <[email protected]>
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================