Skip to contentSkip to conversation

Use defines instead of numbers for cpu hotplug

PATCH In review Gleb Natapov 2 participants 3 messages Oct 24, 2010 KVM

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 Use defines instead of numbers for cpu hotplug

---
 hw/acpi_piix4.c |    5 +++--
 1 files changed, 3 insertions(+), 2 deletions(-)
hw/acpi_piix4.c +3 -2
index 1c8e4e2..1db5ee3 100644
@@ -39,6 +39,7 @@
 #define PCI_BASE 0xae00
 #define PCI_EJ_BASE 0xae08
 
+#define PIIX4_CPU_HOTPLUG_STATUS 4
 #define PIIX4_PCI_HOTPLUG_STATUS 2
 
 struct gpe_regs {
@@ -636,13 +637,13 @@ static void piix4_acpi_system_hot_add_init(PCIBus *bus, PIIX4PMState *s)
 #if defined(TARGET_I386)
 static void enable_processor(struct gpe_regs *g, int cpu)
 {
-    g->sts |= 4;
+    g->sts |= PIIX4_CPU_HOTPLUG_STATUS;
     g->cpus_sts[cpu/8] |= (1 << (cpu%8));
 }
 
 static void disable_processor(struct gpe_regs *g, int cpu)
 {
-    g->sts |= 4;
+    g->sts |= PIIX4_CPU_HOTPLUG_STATUS;
     g->cpus_sts[cpu/8] &= ~(1 << (cpu%8));
 }
 
Signature · 1 line
1.7.1
#1 lore raw

PATCH 2/2 Fix cpu/pci hotplug to generate level triggered interrupt.

SCI is level triggered. cpu/pci hotplug should behave appropriately.

---
 hw/acpi_piix4.c |   16 +++++++---------
 1 files changed, 7 insertions(+), 9 deletions(-)
hw/acpi_piix4.c +7 -9
index 1db5ee3..de3bb88 100644
@@ -111,7 +111,8 @@ static void pm_update_sci(PIIX4PMState *s)
                    ACPI_BITMASK_POWER_BUTTON_ENABLE |
                    ACPI_BITMASK_GLOBAL_LOCK_ENABLE |
                    ACPI_BITMASK_TIMER_ENABLE)) != 0) ||
-        (((s->gpe.sts & s->gpe.en) & PIIX4_PCI_HOTPLUG_STATUS) != 0);
+        (((s->gpe.sts & s->gpe.en) &
+          (PIIX4_CPU_HOTPLUG_STATUS | PIIX4_PCI_HOTPLUG_STATUS)) != 0);
 
     qemu_set_irq(s->irq, sci_level);
     /* schedule a timer interruption if needed */
@@ -610,20 +611,19 @@ static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev, int state);
 
 static void piix4_acpi_system_hot_add_init(PCIBus *bus, PIIX4PMState *s)
 {
-    struct gpe_regs *gpe = &s->gpe;
     struct pci_status *pci0_status = &s->pci0_status;
     int i = 0, cpus = smp_cpus;
 
     while (cpus > 0) {
-        gpe->cpus_sts[i++] = (cpus < 8) ? (1 << cpus) - 1 : 0xff;
+        s->gpe.cpus_sts[i++] = (cpus < 8) ? (1 << cpus) - 1 : 0xff;
         cpus -= 8;
     }
 
     register_ioport_write(GPE_BASE, 4, 1, gpe_writeb, s);
     register_ioport_read(GPE_BASE, 4, 1,  gpe_readb, s);
 
-    register_ioport_write(PROC_BASE, 32, 1, gpe_writeb, gpe);
-    register_ioport_read(PROC_BASE, 32, 1,  gpe_readb, gpe);
+    register_ioport_write(PROC_BASE, 32, 1, gpe_writeb, s);
+    register_ioport_read(PROC_BASE, 32, 1,  gpe_readb, s);
 
     register_ioport_write(PCI_BASE, 8, 4, pcihotplug_write, pci0_status);
     register_ioport_read(PCI_BASE, 8, 4,  pcihotplug_read, pci0_status);
@@ -665,10 +665,8 @@ void qemu_system_cpu_hot_add(int cpu, int state)
         enable_processor(&s->gpe, cpu);
     else
         disable_processor(&s->gpe, cpu);
-    if (s->gpe.en & 4) {
-        qemu_set_irq(s->irq, 1);
-        qemu_set_irq(s->irq, 0);
-    }
+
+    pm_update_sci(s);
 }
 #endif
 
Signature · 1 line
1.7.1
#2 lore raw

Re: [PATCH 2/2] Fix cpu/pci hotplug to generate level triggered interrupt.

hw/acpi_piix4.c static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev, int state); · line 626

Quoted 9 lines · Gleb Natapov
      register_ioport_write(GPE_BASE, 4, 1, gpe_writeb, s);
      register_ioport_read(GPE_BASE, 4, 1,  gpe_readb, s);
hw/acpi_piix4.c +2 -2
-    register_ioport_write(PROC_BASE, 32, 1, gpe_writeb, gpe);
-    register_ioport_read(PROC_BASE, 32, 1,  gpe_readb, gpe);
+    register_ioport_write(PROC_BASE, 32, 1, gpe_writeb, s);
+    register_ioport_read(PROC_BASE, 32, 1,  gpe_readb, s);

This is unrelated - please split.

Signature · 1 line
error compiling committee.c: too many arguments to function