Skip to contentSkip to conversation

mx31_3ds: Remove unused debug board definitions

PATCH New Rogerio Pimentel 2 participants 2 messages Oct 25, 2010 – Oct 26, 2010

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/4 mx31_3ds: Remove unused debug board definitions

In commit (c5d38f08): "mx31_3ds: revert 3ds debug board relate code" the debug board definitions are placed in a separate file.

Remove the remaining debug board related define from mach-mx31_3ds.c.

---
 arch/arm/mach-mx3/mach-mx31_3ds.c |   30 ------------------------------
 1 files changed, 0 insertions(+), 30 deletions(-)
(quoted diff) +0 -0

b/arch/arm/mach-mx3/mach-mx31_3ds.c
index 6fe69e1..bc21efc 100644

arch/arm/mach-mx3/mach-mx31_3ds.c +0 -30
@@ -38,39 +38,9 @@
 #include "devices-imx31.h"
 #include "devices.h"
 
-/* Definitions for components on the Debug board */
-
-/* Base address of CPLD controller on the Debug board */
-#define DEBUG_BASE_ADDRESS		CS5_IO_ADDRESS(MX3x_CS5_BASE_ADDR)
-
-/* LAN9217 ethernet base address */
-#define LAN9217_BASE_ADDR		MX3x_CS5_BASE_ADDR
-
-/* CPLD config and interrupt base address */
-#define CPLD_ADDR			(DEBUG_BASE_ADDRESS + 0x20000)
-
-/* status, interrupt */
-#define CPLD_INT_STATUS_REG		(CPLD_ADDR + 0x10)
-#define CPLD_INT_MASK_REG		(CPLD_ADDR + 0x38)
-#define CPLD_INT_RESET_REG		(CPLD_ADDR + 0x20)
-/* magic word for debug CPLD */
-#define CPLD_MAGIC_NUMBER1_REG		(CPLD_ADDR + 0x40)
-#define CPLD_MAGIC_NUMBER2_REG		(CPLD_ADDR + 0x48)
-/* CPLD code version */
-#define CPLD_CODE_VER_REG		(CPLD_ADDR + 0x50)
-/* magic word for debug CPLD */
-#define CPLD_MAGIC_NUMBER3_REG		(CPLD_ADDR + 0x58)
-
 /* CPLD IRQ line for external uart, external ethernet etc */
 #define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
 
-#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
-#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
-
-#define EXPIO_INT_ENET		(MXC_EXP_IO_BASE + 0)
-
-#define MXC_MAX_EXP_IO_LINES	16
-
 /*
  * This file contains the board-specific initialization routines.
  */
Signature · 1 line
1.7.0.4
#1 lore raw

PATCH 1/4 mx31_3ds: Remove unused debug board definitions

Looks fine to me, These stuffs should be removed earlier. :-)

Quoted 58 lines · Rogerio Pimentel

In commit (c5d38f08): "mx31_3ds: revert 3ds debug board relate code" the debug board definitions are placed in a separate file.

Remove the remaining debug board related define from mach-mx31_3ds.c.

---
 arch/arm/mach-mx3/mach-mx31_3ds.c |   30 ------------------------------
 1 files changed, 0 insertions(+), 30 deletions(-)
arch/arm/mach-mx3/mach-mx31_3ds.c +0 -30
index 6fe69e1..bc21efc 100644
@@ -38,39 +38,9 @@
 #include "devices-imx31.h"
 #include "devices.h"
 
-/* Definitions for components on the Debug board */
-
-/* Base address of CPLD controller on the Debug board */
-#define DEBUG_BASE_ADDRESS		CS5_IO_ADDRESS(MX3x_CS5_BASE_ADDR)
-
-/* LAN9217 ethernet base address */
-#define LAN9217_BASE_ADDR		MX3x_CS5_BASE_ADDR
-
-/* CPLD config and interrupt base address */
-#define CPLD_ADDR			(DEBUG_BASE_ADDRESS + 0x20000)
-
-/* status, interrupt */
-#define CPLD_INT_STATUS_REG		(CPLD_ADDR + 0x10)
-#define CPLD_INT_MASK_REG		(CPLD_ADDR + 0x38)
-#define CPLD_INT_RESET_REG		(CPLD_ADDR + 0x20)
-/* magic word for debug CPLD */
-#define CPLD_MAGIC_NUMBER1_REG		(CPLD_ADDR + 0x40)
-#define CPLD_MAGIC_NUMBER2_REG		(CPLD_ADDR + 0x48)
-/* CPLD code version */
-#define CPLD_CODE_VER_REG		(CPLD_ADDR + 0x50)
-/* magic word for debug CPLD */
-#define CPLD_MAGIC_NUMBER3_REG		(CPLD_ADDR + 0x58)
-
 /* CPLD IRQ line for external uart, external ethernet etc */
 #define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
 
-#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
-#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
-
-#define EXPIO_INT_ENET		(MXC_EXP_IO_BASE + 0)
-
-#define MXC_MAX_EXP_IO_LINES	16
-
 /*
  * This file contains the board-specific initialization routines.
  */