MX5:use common u-boot.lds of cpu layer
PATCH v2 1/1 MX5:use common u-boot.lds of cpu layer
Remove u-boot.lds from mx5 and use the common u-boot.lds of cpu layer. This patch also fix the building errors:
arch/arm/cpu/armv7/start.o: In function `_rel_dyn_start_ofs':arch/arm/cpu/armv7/start.S:283: undefined reference to __rel_dyn_start' arch/arm/cpu/armv7/start.o: In function _rel_dyn_end_ofs':arch/arm/cpu/armv7/start.S:283: undefined reference to __rel_dyn_end' arch/arm/cpu/armv7/start.o: In function _dynsym_start_ofs':arch/arm/cpu/armv7/start.S:283: undefined reference to `__dynsym_start'
---
Changes for V2:
Address the comments from Stefano Babic
- drop from your patch the part concerning the vision2 board
--- arch/arm/cpu/armv7/mx5/u-boot.lds | 73 ------------------------------------- board/freescale/mx51evk/config.mk | 1 - 2 files changed, 0 insertions(+), 74 deletions(-)
arch/arm/cpu/armv7/mx5/u-boot.lds deleted +0 -73
@@ -1,73 +0,0 @@ -/* - * January 2004 - Changed to support H4 device - * Copyright (c) 2004 Texas Instruments - * - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, <[email protected]> - * - * (C) Copyright 2009 Freescale Semiconductor, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -ENTRY(_start) -SECTIONS -{ - . = 0x00000000; - - . = ALIGN(4); - .text : - { - arch/arm/cpu/armv7/start.o - *(.text) - } - - . = ALIGN(4); - .rodata : { *(.rodata) } - - . = ALIGN(4); - .data : { - *(.data) - __datarel_start = .; - *(.data.rel) - __datarelrolocal_start = .; - *(.data.rel.ro.local) - __datarellocal_start = .; - *(.data.rel.local) - __datarelro_start = .; - *(.data.rel.ro) - } - - __got_start = .; - . = ALIGN(4); - .got : { *(.got) } - __got_end = .; - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = ALIGN(4); - __bss_start = .; - .bss : { *(.bss) } - _end = .; -}
board/freescale/mx51evk/config.mk +0 -1
@@ -20,7 +20,6 @@ # MA 02111-1307 USA # -LDSCRIPT = $(CPUDIR)/$(SOC)/u-boot.lds CONFIG_SYS_TEXT_BASE = 0x97800000 IMX_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/imximage.cfg ALL += $(obj)u-boot.imx
Signature · 1 line
1.7.0.4
PATCH v2 1/1 MX5:use common u-boot.lds of cpu layer
Quoted 12 lines · Jason Liu
Remove
u-boot.ldsfrom mx5 and use the commonu-boot.ldsof cpu layer. This patch also fix the building errors:
arch/arm/cpu/armv7/start.o: In function `_rel_dyn_start_ofs':arch/arm/cpu/armv7/start.S:283: undefined reference to__rel_dyn_start' arch/arm/cpu/armv7/start.o: In function_rel_dyn_end_ofs':arch/arm/cpu/armv7/start.S:283: undefined reference to__rel_dyn_end' arch/arm/cpu/armv7/start.o: In function_dynsym_start_ofs':arch/arm/cpu/armv7/start.S:283: undefined reference to `__dynsym_start'Signed-off-by Jason Liu <[email protected]>
Applied to u-boot-imx, thanks
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================