pnfs fixes
Subsystems (2)
PATCH 1/4 pnfs fixes
Here are some pnfs fixes for 2.6.36 since the bakeathon:
[PATCH 1/1] SQUASHME: pnfsd-files: update layout stateid properly
[PATCH 1/1] pnfs: do not change layout stateid when dropping layouts. [PATCH 2/3] pnfs: mark page with error in readpage_async_filler when crossing lsegs [PATCH 3/3] SQUASHME: pnfs: filelayout: print_ds should use dprintk
PATCH 1/1 SQUASHME: pnfsd-files: update layout stateid properly
From: Benny Halevy <[email protected]>
the layout stateid must be updated by layout get only on success upon changing the actual state, otherwise, a parallel layout_recall will send the wrong stateid.
--- fs/nfsd/nfs4pnfsd.c | 35 ++++++++++++++++++++++------------- 1 files changed, 22 insertions(+), 13 deletions(-)
fs/nfsd/nfs4pnfsd.c +22 -13
@@ -302,7 +302,7 @@ nfs4_process_layout_stateid(struct nfs4_client *clp, struct nfs4_file *fp,if (lsp && ((verify_stateid (fp, stateid)) ==0 )) {dprintk ("%s parallel initial layout state\n" , __func__); - goto update; + goto verified; }dprintk ("%s ERROR bad opaque in stateid 1\n" , __func__);
@@ -314,14 +314,9 @@ nfs4_process_layout_stateid(struct nfs4_client *clp, struct nfs4_file *fp,dprintk ("%s bad stateid 1\n" , __func__); goto out_put; } -update: -update_stateid (&ls->ls_stateid); -dprintk ("%s Updated ls_stateid to %d on layoutstate %p\n" , - __func__, ls->ls_stateid.si_generation, ls); } +verified: status =0 ; -/* Set the stateid to be encoded */ -memcpy (stateid, &ls->ls_stateid,sizeof (stateid_t));/* Return the layout state if requested */ if (lsp) {
@@ -351,13 +346,21 @@ free_layout(struct nfs4_layout *lp)kmem_cache_free (pnfs_layout_slab, lp); } +#define update_layout_stateid (ls, sid) { \ + update_stateid(&(ls)->ls_stateid); \ + dprintk("%s Updated ls_stateid to %d on layoutstate %p\n", \ + __func__, (ls)->ls_stateid.si_generation, (ls)); \ + memcpy((sid), &(ls)->ls_stateid, sizeof(stateid_t)); \ +} +static void init_layout (struct nfs4_layout_state *ls,struct nfs4_layout *lp,struct nfs4_file *fp,struct nfs4_client *clp,struct svc_fh *current_fh, -struct nfsd4_layout_seg *seg) +struct nfsd4_layout_seg *seg, +stateid_t *stateid) {dprintk ("pNFS %s: ls %p lp %p clp %p fp %p ino %p\n" , __func__, ls, lp, clp, fp, fp->fi_inode);
@@ -369,6 +372,7 @@ init_layout(struct nfs4_layout_state *ls, lp->lo_state = ls;memcpy (&lp->lo_seg, seg,sizeof (lp->lo_seg));spin_lock (&layout_lock); +update_layout_stateid (ls, stateid);list_add_tail (&lp->lo_perstate, &ls->ls_layouts);list_add_tail (&lp->lo_perclnt, &clp->cl_layouts);list_add_tail (&lp->lo_perfile, &fp->fi_layouts);
@@ -717,7 +721,7 @@ nfs4_pnfs_get_layout(struct nfsd4_pnfs_layoutget *lgp, goto out_freelayout;/* Can't merge, so let's initialize this new layout */ -init_layout (ls, lp, fp, clp, lgp->lg_fhp, &res.lg_seg); +init_layout (ls, lp, fp, clp, lgp->lg_fhp, &res.lg_seg, &lgp->lg_sid); out_unlock:if (ls)put_layout_state (ls);
@@ -773,7 +777,8 @@ out:static int pnfs_return_file_layouts (struct nfs4_client *clp,struct nfs4_file *fp, -struct nfsd4_pnfs_layoutreturn *lrp) +struct nfsd4_pnfs_layoutreturn *lrp, +struct nfs4_layout_state *ls) {int layouts_found =0 ;struct nfs4_layout *lp, *nextlp;
@@ -799,6 +804,8 @@ pnfs_return_file_layouts(struct nfs4_client *clp, struct nfs4_file *fp,destroy_layout (lp); } } +if (ls && layouts_found && lrp->lrs_present) +update_layout_stateid (ls, &lrp->lr_sid);spin_unlock (&layout_lock);return layouts_found;
@@ -838,6 +845,7 @@ int nfs4_pnfs_return_layout(struct super_block *sb, struct svc_fh *current_fh,struct inode *ino = current_fh->fh_dentry->d_inode;struct nfs4_file *fp =NULL ;struct nfs4_client *clp; +struct nfs4_layout_state *ls =NULL ;u64 ex_fsid = current_fh->fh_export->ex_fsid;void *recall_cookie =NULL ;
@@ -859,13 +867,12 @@ int nfs4_pnfs_return_layout(struct super_block *sb, struct svc_fh *current_fh,/* Check the stateid */ dprintk ("%s PROCESS LO_STATEID inode %p\n" , __func__, ino); - status =nfs4_process_layout_stateid (clp, fp, &lrp->lr_sid, -NULL ); + status =nfs4_process_layout_stateid (clp, fp, &lrp->lr_sid, &ls);if (status) goto out_put_file;/* update layouts */ - layouts_found =pnfs_return_file_layouts (clp, fp, lrp); + layouts_found =pnfs_return_file_layouts (clp, fp, lrp, ls);/* optimize for the all-empty case */ if (list_empty (&fp->fi_layouts)) recall_cookie =PNFS_LAST_LAYOUT_NO_RECALLS ;
@@ -884,6 +891,8 @@ int nfs4_pnfs_return_layout(struct super_block *sb, struct svc_fh *current_fh, out_put_file:if (fp)put_nfs4_file (fp); +if (ls) +put_layout_state (ls); out:nfs4_unlock_state ();
Signature · 1 line
1.7.2.3
PATCH 1/1 pnfs: do not change layout stateid when dropping layouts.
In reply to Benny HalevyOn voluntary "forgets", where the client drops the layout on its own the inode's layotu stateid must not change.
--- fs/nfs/nfs4xdr.c | 1 + fs/nfs/pnfs.c | 6 ++++-- include/linux/nfs_xdr.h | 1 + 3 files changed, 6 insertions(+), 2 deletions(-)
fs/nfs/nfs4xdr.c +1 -0
@@ -5243,6 +5243,7 @@ static int decode_layoutreturn(struct xdr_stream *xdr, p =xdr_inline_decode (xdr,4 );if (unlikely (!p)) goto out_overflow; + res->valid = true; res->lrs_present =be32_to_cpup (p);if (res->lrs_present) status =decode_stateid (xdr, &res->stateid);
fs/nfs/pnfs.c +4 -2
@@ -593,9 +593,11 @@ pnfs_layoutreturn_release(struct nfs4_layoutreturn *lrp)return ;spin_lock (&lrp->args.inode->i_lock);pnfs_clear_lseg_list (lo, &tmp_list, &lrp->args.range); -if (!lrp->res.lrs_present) +if (!lrp->res.valid) + ;/* forgetful model internal release */ +else if (!lrp->res.lrs_present)pnfs_invalidate_layout_stateid (lo); -else +else pnfs_set_layout_stateid (lo, &lrp->res.stateid);put_layout_hdr_locked (lo);/* Matched in _pnfs_return_layout */ spin_unlock (&lrp->args.inode->i_lock);
include/linux/nfs_xdr.h +1 -0
@@ -269,6 +269,7 @@ struct nfs4_layoutreturn_args {struct nfs4_layoutreturn_res {struct nfs4_sequence_res seq_res; +bool valid;/* internal, true if received reply */ u32 lrs_present;nfs4_stateid stateid; };
Signature · 1 line
1.7.2.3
PATCH 2/3 pnfs: mark page with error in readpage_async_filler when crossing lsegs
In reply to Benny HalevyFrom: Benny Halevy <[email protected]>
--- fs/nfs/read.c | 20 ++++++++++---------- 1 files changed, 10 insertions(+), 10 deletions(-)
fs/nfs/read.c +10 -10
@@ -605,24 +605,24 @@ readpage_async_filler(void *data, struct page *page) {struct nfs_readdesc *desc = (struct nfs_readdesc *)data;struct inode *inode = page->mapping->host; -struct pnfs_layout_range *range;struct nfs_page *new;unsigned int len; -loff_t pgoff;int error; len =nfs_page_length (page);if (len ==0 )return nfs_return_empty_page (page); - pgoff = (loff_t )page->index <<PAGE_CACHE_SHIFT ; - range = desc->pgio->pg_lseg ? &desc->pgio->pg_lseg->range :NULL ; -if (!range || - (range->offset > pgoff + len) || - (range->offset + range->length < pgoff)) { -put_lseg (desc->pgio->pg_lseg); - desc->pgio->pg_lseg =pnfs_update_layout (inode, desc->ctx, - pgoff, len,IOMODE_READ ); +if (desc->pgio->pg_lseg) { +loff_t pgoff = (loff_t )page->index <<PAGE_CACHE_SHIFT ; +struct pnfs_layout_range *range = &desc->pgio->pg_lseg->range; + +/* retry later with the right lseg? */ +if (range->offset > pgoff + len || + range->offset + range->length < pgoff) { + new =ERR_PTR (-EAGAIN ); + goto out_error; + } } new = nfs_create_request(desc->ctx, inode, page, 0, len,
Signature · 1 line
1.7.2.3
PATCH 3/3 SQUASHME: pnfs: filelayout: print_ds should use dprintk
In reply to Benny Halevyrather than printk to prevent printouts in non-debug mode currently happening in filelayout_commit
--- fs/nfs/nfs4filelayoutdev.c | 9 ++++----- 1 files changed, 4 insertions(+), 5 deletions(-)
fs/nfs/nfs4filelayoutdev.c +4 -5
@@ -53,10 +53,10 @@ void print_ds(struct nfs4_pnfs_ds *ds) {if (ds ==NULL ) { -printk ("%s NULL device\n" , __func__); +dprintk ("%s NULL device\n" , __func__);return ; } - printk(" ip_addr %x port %hu\n" + dprintk(" ip_addr %x port %hu\n" " ref count %d\n" " client %p\n" " cl_exchange_flags %x\n",
@@ -71,7 +71,7 @@ print_ds_list(struct nfs4_file_layout_dsaddr *dsaddr)int i;ifdebug (FACILITY ) { -printk ("%s dsaddr->ds_num %d\n" , __func__, +dprintk ("%s dsaddr->ds_num %d\n" , __func__, dsaddr->ds_num);for (i =0 ; i < dsaddr->ds_num; i++)print_ds (dsaddr->ds_list[i]);
@@ -211,8 +211,7 @@ static void destroy_ds(struct nfs4_pnfs_ds *ds) {dprintk ("--> %s\n" , __func__); -ifdebug (FACILITY) -print_ds (ds); +print_ds (ds);if (ds->ds_clp)nfs_put_client (ds->ds_clp);
Signature · 1 line
1.7.2.3
Re: [PATCH 3/3] SQUASHME: pnfs: filelayout: print_ds should use dprintk
The change to printk was in response to Trond's complaint about successive dprintks.
Instead, the following would work:
fs/nfs/nfs4filelayout.c +2 -1
@@ -585,7 +585,8 @@ filelayout_commit(struct nfs_write_data *data, int sync) }dprintk ("%s: Initiating commit: %llu USE DS:\n" , __func__, file_offset); -print_ds (ds); +ifdebug (FACILITY) +print_ds (ds);/* Send COMMIT to data server */ nfs_initiate_commit (dsdata, clnt, call_ops, sync);
Fred
Quoted 52 lines · Benny Halevy
rather than printk to prevent printouts in non-debug mode currently happening in
filelayout_commitSigned-off-by Benny Halevy <[email protected]>---
fs/nfs/nfs4filelayoutdev.c | 9 ++++-----1 files changed, 4 insertions(+), 5 deletions(-)fs/nfs/nfs4filelayoutdev.c +2
-2@@ -53,10 +53,10 @@ void print_ds(struct nfs4_pnfs_ds *ds) { if (ds == NULL) { - printk("%s NULL device\n", __func__); + dprintk("%s NULL device\n", __func__); return; } - printk(" ip_addr %x port %hu\n" + dprintk(" ip_addr %x port %hu\n"" ref count %d\n"
" client %p\n"
" cl_exchange_flags %x\n",fs/nfs/nfs4filelayoutdev.c +2
-4@@ -71,7 +71,7 @@ print_ds_list(struct nfs4_file_layout_dsaddr *dsaddr) int i; ifdebug(FACILITY) { - printk("%s dsaddr->ds_num %d\n", __func__, + dprintk("%s dsaddr->ds_num %d\n", __func__, dsaddr->ds_num); for (i = 0; i < dsaddr->ds_num; i++) print_ds(dsaddr->ds_list[i]);@@ -211,8 +211,7 @@ static void destroy_ds(struct nfs4_pnfs_ds *ds) { dprintk("--> %s\n", __func__); - ifdebug(FACILITY) - print_ds(ds); + print_ds(ds); if (ds->ds_clp) nfs_put_client(ds->ds_clp); --1.7.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 3/3] SQUASHME: pnfs: filelayout: print_ds should use dprintk
fs/nfs/nfs4filelayout.c filelayout_commit(struct nfs_write_data *data, int sync) · line 585
Quoted 12 lines · Fred Isaman
The change to printk was in response to Trond's complaint about successive dprintks.
Instead, the following would work:
fs/nfs/nfs4filelayout.c +0
-0@@ -585,7 +585,8 @@ filelayout_commit(struct nfs_write_data *data, int sync) }
If we're going this way, the ifdebug could cover the following printout as well...
Benny
Quoted 65 lines
fs/nfs/nfs4filelayout.c +2
-1dprintk ("%s: Initiating commit: %llu USE DS:\n" , __func__, file_offset); -print_ds (ds); +ifdebug (FACILITY) +print_ds (ds);/* Send COMMIT to data server */ nfs_initiate_commit (dsdata, clnt, call_ops, sync);Fred
Quoted 52 lines · Benny Halevy
rather than printk to prevent printouts in non-debug mode currently happening in
filelayout_commitSigned-off-by Benny Halevy <[email protected]>--- fs/nfs/nfs4filelayoutdev.c | 9 ++++----- 1 files changed, 4 insertions(+), 5 deletions(-)fs/nfs/nfs4filelayoutdev.c +4
-6@@ -53,10 +53,10 @@ void print_ds(struct nfs4_pnfs_ds *ds) {if (ds ==NULL ) { -printk ("%s NULL device\n" , __func__); +dprintk ("%s NULL device\n" , __func__);return ; } - printk(" ip_addr %x port %hu\n" + dprintk(" ip_addr %x port %hu\n" " ref count %d\n" " client %p\n" " cl_exchange_flags %x\n",@@ -71,7 +71,7 @@ print_ds_list(struct nfs4_file_layout_dsaddr *dsaddr)int i;ifdebug (FACILITY ) { -printk ("%s dsaddr->ds_num %d\n" , __func__, +dprintk ("%s dsaddr->ds_num %d\n" , __func__, dsaddr->ds_num);for (i =0 ; i < dsaddr->ds_num; i++)print_ds (dsaddr->ds_list[i]);@@ -211,8 +211,7 @@ static void destroy_ds(struct nfs4_pnfs_ds *ds) {dprintk ("--> %s\n" , __func__); -ifdebug (FACILITY) -print_ds (ds); +print_ds (ds);if (ds->ds_clp)nfs_put_client (ds->ds_clp); --1.7.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 3/3] SQUASHME: pnfs: filelayout: print_ds should use dprintk
Quoted 7 lines · Benny Halevy
Quoted 6 lines · Fred Isaman
The change to printk was in response to Trond's complaint about successive dprintks.
Instead, the following would work:
Quoted 10 lines
fs/nfs/nfs4filelayout.c filelayout_commit(struct nfs_write_data *data, int sync) · line 585
Quoted 6 lines
fs/nfs/nfs4filelayout.c +0
-0@@ -585,7 +585,8 @@ filelayout_commit(struct nfs_write_data *data, int sync) }If we're going this way, the ifdebug could cover the following printout as well...
Did you mean preceding printout? By the way - the complaint about successive dprintks was regardingprint_ds_list repeatedly calling print_ds, which at the time used dprintk.
Fred
Quoted 72 lines
Benny
Quoted 60 lines
fs/nfs/nfs4filelayout.c +2
-1dprintk("%s: Initiating commit: %llu USE DS:\n", __func__, file_offset); - print_ds(ds); + ifdebug(FACILITY) + print_ds(ds); /* Send COMMIT to data server */ nfs_initiate_commit(dsdata, clnt, call_ops, sync);Fred
Quoted 47 lines · Benny Halevy
rather than printk to prevent printouts in non-debug mode currently happening in
filelayout_commitSigned-off-by Benny Halevy <[email protected]>---
fs/nfs/nfs4filelayoutdev.c | 9 ++++-----1 files changed, 4 insertions(+), 5 deletions(-)fs/nfs/nfs4filelayoutdev.c +2
-2@@ -53,10 +53,10 @@ void print_ds(struct nfs4_pnfs_ds *ds) { if (ds == NULL) { - printk("%s NULL device\n", __func__); + dprintk("%s NULL device\n", __func__); return; } - printk(" ip_addr %x port %hu\n" + dprintk(" ip_addr %x port %hu\n"" ref count %d\n"
" client %p\n"
" cl_exchange_flags %x\n",fs/nfs/nfs4filelayoutdev.c +2
-4@@ -71,7 +71,7 @@ print_ds_list(struct nfs4_file_layout_dsaddr *dsaddr) int i; ifdebug(FACILITY) { - printk("%s dsaddr->ds_num %d\n", __func__, + dprintk("%s dsaddr->ds_num %d\n", __func__, dsaddr->ds_num); for (i = 0; i < dsaddr->ds_num; i++) print_ds(dsaddr->ds_list[i]);@@ -211,8 +211,7 @@ static void destroy_ds(struct nfs4_pnfs_ds *ds) { dprintk("--> %s\n", __func__); - ifdebug(FACILITY) - print_ds(ds); + print_ds(ds); if (ds->ds_clp) nfs_put_client(ds->ds_clp); --1.7.2.3
Quoted 5 lines
Quoted 5 lines
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 3/3] SQUASHME: pnfs: filelayout: print_ds should use dprintk
Quoted 19 lines · Fred Isaman
Quoted 7 lines · Benny Halevy
Quoted 6 lines · Fred Isaman
The change to printk was in response to Trond's complaint about successive dprintks.
Instead, the following would work:
Quoted 10 lines
fs/nfs/nfs4filelayout.c filelayout_commit(struct nfs_write_data *data, int sync) · line 585
Quoted 6 lines
fs/nfs/nfs4filelayout.c +0
-0@@ -585,7 +585,8 @@ filelayout_commit(struct nfs_write_data *data, int sync) }If we're going this way, the ifdebug could cover the following printout as well...
Quoted 1 line
Did you mean preceding printout? By the way - the complaint about
Yeah, preceding the call to print_ds (following my comment :)
Quoted 2 lines
successive dprintks was regarding
print_ds_listrepeatedly callingprint_ds, which at the time used dprintk.
Why do we care to optimize the debug case so much? print_ds_list is already calling print_ds inside ifdebug(FACILITY) so the common, non-debug case is optimized correctly. I.e. we don't repeatedly check the debug flag normally.
Benny
Quoted 75 lines
Fred
Quoted 72 lines
Benny
Quoted 60 lines
fs/nfs/nfs4filelayout.c +2
-1dprintk ("%s: Initiating commit: %llu USE DS:\n" , __func__, file_offset); -print_ds (ds); +ifdebug (FACILITY) +print_ds (ds);/* Send COMMIT to data server */ nfs_initiate_commit (dsdata, clnt, call_ops, sync);Fred
Quoted 47 lines · Benny Halevy
rather than printk to prevent printouts in non-debug mode currently happening in
filelayout_commitSigned-off-by Benny Halevy <[email protected]>--- fs/nfs/nfs4filelayoutdev.c | 9 ++++----- 1 files changed, 4 insertions(+), 5 deletions(-)fs/nfs/nfs4filelayoutdev.c +4
-6@@ -53,10 +53,10 @@ void print_ds(struct nfs4_pnfs_ds *ds) {if (ds ==NULL ) { -printk ("%s NULL device\n" , __func__); +dprintk ("%s NULL device\n" , __func__);return ; } - printk(" ip_addr %x port %hu\n" + dprintk(" ip_addr %x port %hu\n" " ref count %d\n" " client %p\n" " cl_exchange_flags %x\n",@@ -71,7 +71,7 @@ print_ds_list(struct nfs4_file_layout_dsaddr *dsaddr)int i;ifdebug (FACILITY ) { -printk ("%s dsaddr->ds_num %d\n" , __func__, +dprintk ("%s dsaddr->ds_num %d\n" , __func__, dsaddr->ds_num);for (i =0 ; i < dsaddr->ds_num; i++)print_ds (dsaddr->ds_list[i]);@@ -211,8 +211,7 @@ static void destroy_ds(struct nfs4_pnfs_ds *ds) {dprintk ("--> %s\n" , __func__); -ifdebug (FACILITY) -print_ds (ds); +print_ds (ds);if (ds->ds_clp)nfs_put_client (ds->ds_clp); --1.7.2.3
Quoted 5 lines
Quoted 5 lines
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 3/3] SQUASHME: pnfs: filelayout: print_ds should use dprintk
Quoted 24 lines · Benny Halevy
Quoted 19 lines · Fred Isaman
Quoted 7 lines · Benny Halevy
Quoted 6 lines · Fred Isaman
The change to printk was in response to Trond's complaint about successive dprintks.
Instead, the following would work:
Quoted 10 lines
fs/nfs/nfs4filelayout.c filelayout_commit(struct nfs_write_data *data, int sync) · line 585
Quoted 6 lines
fs/nfs/nfs4filelayout.c +0
-0@@ -585,7 +585,8 @@ filelayout_commit(struct nfs_write_data *data, int sync) }If we're going this way, the ifdebug could cover the following printout as well...
Quoted 1 line
Did you mean preceding printout? By the way - the complaint about
Yeah, preceding the call to
print_ds(following my comment :)
Quoted 7 lines
Quoted 2 lines
successive dprintks was regarding
print_ds_listrepeatedly callingprint_ds, which at the time used dprintk.Why do we care to optimize the debug case so much?
print_ds_listis already callingprint_dsinside ifdebug(FACILITY) so the common, non-debug case is optimized correctly. I.e. we don't repeatedly check the debug flag normally.
It's not about optimizing the debug case. It's about avoiding having to check ifdebug(FACILITY) all the time when we're _not_ debugging.
Trond
Re: [PATCH 3/3] SQUASHME: pnfs: filelayout: print_ds should use dprintk
Quoted 28 lines · Trond Myklebust
Quoted 27 lines · Benny Halevy
Quoted 19 lines · Fred Isaman
Quoted 7 lines · Benny Halevy
Quoted 6 lines · Fred Isaman
The change to printk was in response to Trond's complaint about successive dprintks.
Instead, the following would work:
Quoted 10 lines
fs/nfs/nfs4filelayout.c filelayout_commit(struct nfs_write_data *data, int sync) · line 585
Quoted 6 lines
fs/nfs/nfs4filelayout.c +0
-0@@ -585,7 +585,8 @@ filelayout_commit(struct nfs_write_data *data, int sync) }If we're going this way, the ifdebug could cover the following printout as well...
Quoted 1 line
Did you mean preceding printout? By the way - the complaint about
Yeah, preceding the call to
print_ds(following my comment :)Quoted 2 lines
successive dprintks was regarding
print_ds_listrepeatedly callingprint_ds, which at the time used dprintk.
Quoted 7 lines
Quoted 4 lines
Why do we care to optimize the debug case so much?
print_ds_listis already callingprint_dsinside ifdebug(FACILITY) so the common, non-debug case is optimized correctly. I.e. we don't repeatedly check the debug flag normally.It's not about optimizing the debug case. It's about avoiding having to check ifdebug(FACILITY) all the time when we're _not_ debugging.
Right, and so we do, as the whole loop in print_ds_list is enclosed in ifdebug(FACILITY).
Benny
Quoted 3 lines
Trond
Re: [PATCH 3/3] SQUASHME: pnfs: filelayout: print_ds should use dprintk
Quoted 34 lines · Benny Halevy
Quoted 33 lines · Trond Myklebust
Quoted 31 lines · Benny Halevy
Quoted 19 lines · Fred Isaman
Quoted 7 lines · Benny Halevy
Quoted 6 lines · Fred Isaman
The change to printk was in response to Trond's complaint about successive dprintks.
Instead, the following would work:
Quoted 10 lines
fs/nfs/nfs4filelayout.c filelayout_commit(struct nfs_write_data *data, int sync) · line 585
Quoted 6 lines
fs/nfs/nfs4filelayout.c +0
-0@@ -585,7 +585,8 @@ filelayout_commit(struct nfs_write_data *data, int sync) }If we're going this way, the ifdebug could cover the following printout as well...
Quoted 1 line
Did you mean preceding printout? By the way - the complaint about
Yeah, preceding the call to
print_ds(following my comment :)Quoted 2 lines
successive dprintks was regarding
print_ds_listrepeatedly callingprint_ds, which at the time used dprintk.Why do we care to optimize the debug case so much?
print_ds_listis already callingprint_dsinside ifdebug(FACILITY) so the common, non-debug case is optimized correctly. I.e. we don't repeatedly check the debug flag normally.
Quoted 5 lines
Quoted 2 lines
It's not about optimizing the debug case. It's about avoiding having to check ifdebug(FACILITY) all the time when we're _not_ debugging.
Right, and so we do, as the whole loop in
print_ds_listis enclosed in ifdebug(FACILITY).
In that case, I agree: the whole thing can be converted to use ordinary printks...
Trond
Re: [PATCH 3/3] SQUASHME: pnfs: filelayout: print_ds should use dprintk
Quoted 35 lines · Trond Myklebust
Quoted 34 lines · Benny Halevy
Quoted 33 lines · Trond Myklebust
Quoted 31 lines · Benny Halevy
Quoted 19 lines · Fred Isaman
Quoted 7 lines · Benny Halevy
Quoted 6 lines · Fred Isaman
The change to printk was in response to Trond's complaint about successive dprintks.
Instead, the following would work:
Quoted 10 lines
fs/nfs/nfs4filelayout.c filelayout_commit(struct nfs_write_data *data, int sync) · line 585
Quoted 6 lines
fs/nfs/nfs4filelayout.c +0
-0@@ -585,7 +585,8 @@ filelayout_commit(struct nfs_write_data *data, int sync) }If we're going this way, the ifdebug could cover the following printout as well...
Quoted 1 line
Did you mean preceding printout? By the way - the complaint about
Yeah, preceding the call to
print_ds(following my comment :)Quoted 2 lines
successive dprintks was regarding
print_ds_listrepeatedly callingprint_ds, which at the time used dprintk.Why do we care to optimize the debug case so much?
print_ds_listis already callingprint_dsinside ifdebug(FACILITY) so the common, non-debug case is optimized correctly. I.e. we don't repeatedly check the debug flag normally.
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
It's not about optimizing the debug case. It's about avoiding having to check ifdebug(FACILITY) all the time when we're _not_ debugging.
Right, and so we do, as the whole loop in
print_ds_listis enclosed in ifdebug(FACILITY).In that case, I agree: the whole thing can be converted to use ordinary printks...
The point is it has a singular caller outside of this loop for which the caller needs to check ifdebug(FACILITY) before calling print_ds. Not a big deal, but I think it'd be cleaner if print_ds will do a dprintk to simplify its singular usage, while the cost of that will be extra tests when called, possibly many times, in debug mode from print_ds_list.
Benny
Quoted 3 lines
Trond
Re: [PATCH 3/3] SQUASHME: pnfs: filelayout: print_ds should use dprintk
Quoted 42 lines · Benny Halevy
Quoted 41 lines · Trond Myklebust
Quoted 39 lines · Benny Halevy
Quoted 28 lines · Trond Myklebust
Quoted 27 lines · Benny Halevy
Quoted 19 lines · Fred Isaman
Quoted 7 lines · Benny Halevy
Quoted 6 lines · Fred Isaman
The change to printk was in response to Trond's complaint about successive dprintks.
Instead, the following would work:
Quoted 10 lines
fs/nfs/nfs4filelayout.c filelayout_commit(struct nfs_write_data *data, int sync) · line 585
Quoted 6 lines
fs/nfs/nfs4filelayout.c +0
-0@@ -585,7 +585,8 @@ filelayout_commit(struct nfs_write_data *data, int sync) }If we're going this way, the ifdebug could cover the following printout as well...
Quoted 1 line
Did you mean preceding printout? By the way - the complaint about
Yeah, preceding the call to
print_ds(following my comment :)Quoted 2 lines
successive dprintks was regarding
print_ds_listrepeatedly callingprint_ds, which at the time used dprintk.Quoted 7 lines
Quoted 4 lines
Why do we care to optimize the debug case so much?
print_ds_listis already callingprint_dsinside ifdebug(FACILITY) so the common, non-debug case is optimized correctly. I.e. we don't repeatedly check the debug flag normally.It's not about optimizing the debug case. It's about avoiding having to check ifdebug(FACILITY) all the time when we're _not_ debugging.
Right, and so we do, as the whole loop in
print_ds_listis enclosed in ifdebug(FACILITY).
Quoted 8 lines
Quoted 2 lines
In that case, I agree: the whole thing can be converted to use ordinary printks...
The point is it has a singular caller outside of this loop for which the caller needs to check ifdebug(FACILITY) before calling
print_ds. Not a big deal, but I think it'd be cleaner ifprint_dswill do a dprintk to simplify its singular usage, while the cost of that will be extra tests when called, possibly many times, in debug mode fromprint_ds_list.
Nevermind, I just merged Fred's patch instead.
No need to spend that much energy on cosmetics in this case :)
Benny
Quoted 10 lines
Benny
Quoted 3 lines
Trond
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html