fs: Add FITRIM ioctl
Quoted 8 lines · Lukas Czerner
Gitweb: http://git.kernel.org/linus/367a51a339020ba4d9edb0ce0f21d65bd50b00c9 Commit: 367a51a339020ba4d9edb0ce0f21d65bd50b00c9 Parent: 77ca6cdf0ab8a42f481ec997911bc89e79138723 Author: Lukas Czerner <[email protected]> AuthorDate: Wed Oct 27 21:30:11 2010 -0400 Committer: Theodore Ts'o <[email protected]> CommitDate: Wed Oct 27 21:30:11 2010 -0400
I've just noticed this patch. Was it posted to linux-fsdevel? Sorry for missing it.
So I have a comment, and question.
---
Quoted 13 lines
fs: Add FITRIM ioctl
Adds an filesystem independent ioctl to allow implementation of file system batched discard support. I takes
fstrim_rangestructure as an argument.fstrim_rangeis definec in theinclude/fs.hand its definition is as follows.struct
fstrim_range{
start;
len;
minlen;
}
Quoted 6 lines
start - first Byte to trim
len - number of Bytes to trim from start
minlen - minimum extent length to trim, free extents shorter than this
number of Bytes will be ignored. This will be rounded up to fs block size.
Was the range done so it could be called in parts, and progress displayed?
Quoted 36 lines
It is also possible to specify NULL as an argument. In this case the arguments will set itself as follows:
start = 0;
len =ULLONG_MAX;
minlen = 0;So it will trim the whole file system at one run.
After the FITRIM is done, the number of actually discarded Bytes is stored in fstrim_range.len to give the user better insight on how much storage space has been really released for wear-leveling.
Signed-off-by Lukas Czerner <[email protected]>Reviewed-by Dmitry Monakhov <[email protected]>Signed-off-by "Theodore Ts'o" <[email protected]>--- fs/ioctl.c | 39 +++++++++++++++++++++++++++++++++++++++ include/linux/fs.h | 8 ++++++++ 2 files changed, 47 insertions(+), 0 deletions(-)fs/ioctl.c +7
-0@@ -530,6 +530,41 @@ static int ioctl_fsthaw(struct file *filp)return thaw_super (sb); } +static int ioctl_fstrim (struct file *filp,void __user *argp) +{ +struct super_block *sb = filp->f_path.dentry->d_inode->i_sb; +struct fstrim_range range; +int ret =0 ; + +if (!capable (CAP_SYS_ADMIN ))
fs/ioctl.c static int ioctl_fsthaw(struct file *filp) · line 549
Quoted 10 lines
fs/ioctl.c +10
-0+return -EPERM ; + +/* If filesystem doesn't support trim feature, return. */ +if (sb->s_op->trim_fs ==NULL ) +return -EOPNOTSUPP ; + +/* If a blockdevice-backed filesystem isn't specified, return EINVAL. */ +if (sb->s_bdev ==NULL ) +return -EINVAL ; +
What is the point of that? sb->s_bdev is not used anywhere in this code. If an FS published an sb->s_op->trim_fs, it should know what it wants No? Note that the FS in question does not even need to check. It already knows if it's block based or not.
Thanks
Boaz
Quoted 70 lines
fs/ioctl.c +22
-0+if (argp ==NULL ) { + range.start =0 ; + range.len =ULLONG_MAX ; + range.minlen =0 ; + }else if (copy_from_user (&range, argp,sizeof (range))) +return -EFAULT ; + + ret = sb->s_op->trim_fs (sb, &range); +if (ret <0 ) +return ret; + +if ((argp !=NULL ) && + (copy_to_user (argp, &range,sizeof (range)))) +return -EFAULT ; + +return 0 ; +} +/* * When you add any new common ioctls to the switches above and below * please update compat_sys_ioctl() too. @@ -580,6 +615,10 @@ int do_vfs_ioctl(struct file *filp, unsigned int fd, unsigned int cmd, error =ioctl_fsthaw (filp);break ; +case FITRIM : + error =ioctl_fstrim (filp, argp); +break ; +case FS_IOC_FIEMAP :return ioctl_fiemap (filp, arg);include/linux/fs.h +8
-1@@ -32,6 +32,12 @@#define SEEK_END 2/* seek relative to end of file */ #define SEEK_MAX SEEK_END +struct fstrim_range { +uint64_t start; +uint64_t len; +uint64_t minlen; +}; +/* And dynamically-tunable limits and defaults: */ struct files_stat_struct {int nr_files;/* read only */ @@ -316,6 +322,7 @@ struct inodes_stat_t {#define FIGETBSZ _IO(0x00,2)/* get the block size used for bmap */ #define FIFREEZE _IOWR('X', 119, int)/* Freeze */ #define FITHAW _IOWR('X', 120, int)/* Thaw */ +#define FITRIM _IOWR('X', 121, struct fstrim_range)/* Trim */ #define FS_IOC_GETFLAGS _IOR('f', 1, long)#define FS_IOC_SETFLAGS _IOW('f', 2, long)@@ -1581,6 +1588,7 @@ struct super_operations {ssize_t (*quota_write)(struct super_block *,int ,const char *,size_t ,loff_t );#endif int (*bdev_try_to_free_page)(struct super_block *,struct page *,gfp_t ); +int (*trim_fs) (struct super_block *,struct fstrim_range *); };/* -- To unsubscribe from this list: send the line "unsubscribe git-commits-head" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 2 lines · Boaz Harrosh
I've just noticed this patch. Was it posted to linux-fsdevel? Sorry for missing it.
It has been, but only very recently.
I can't say I overly like it. There's no real point in dispatching this out to a separate vector instead of just through ->ioctl. It's got rather useless special case for ommiting the argument, and the whole thing just doesn't seem generic enough to do it in the VFS.
Why did this common code go in through the ext4 tree as a start, and without hitting linux-next before the merge window?
Quoted 4 lines
What is the point of that?
sb->s_bdevis not used anywhere in this code. If an FS published ansb->s_op->trim_fs, it should know what it wants No? Note that the FS in question does not even need to check. It already knows if it's block based or not.
Indeed. Looks like copied from freeze/thaw which used to be block device based, but don't really need this anymore either.
Hi Christoph,
Quoted 11 lines · Christoph Hellwig
Quoted 2 lines · Boaz Harrosh
I've just noticed this patch. Was it posted to linux-fsdevel? Sorry for missing it.
It has been, but only very recently.
I can't say I overly like it. There's no real point in dispatching this out to a separate vector instead of just through ->ioctl. It's got rather useless special case for ommiting the argument, and the whole thing just doesn't seem generic enough to do it in the VFS.
Well, learning from examples, that's what I am doing and ioctl_fiemap() is doing the same thing so I was using that as an example. And, of course, I am returning the amount of really discarded Bytes to the user and I just can not simply use user-space pointer, or maybe I do not understand you correctly.
About the special case I am not entirely sure that it is useless, since there is no point in allocating the structure and setting range when you just want to discard the whole thing (in user-space of course). But the reason why to do it in ioctl_fstrim() is that otherwise some filesystems might decide to return EINVAL when no argument has been passed and some may handle it differently, hence it would not be consistent.
Quoted 3 lines
Why did this common code go in through the ext4 tree as a start, and without hitting linux-next before the merge window?
I have posted it on both linux-fsdevel and linux-ext4 and we needed it for batched discard implementation in ext4 so that is probably why it went through ext4 tree. Unfortunately, I can not answer the second question...
Quoted 9 lines
Quoted 5 lines
What is the point of that?
sb->s_bdevis not used anywhere in this code. If an FS published ansb->s_op->trim_fs, it should know what it wants No? Note that the FS in question does not even need to check. It already knows if it's block based or not.Indeed. Looks like copied from freeze/thaw which used to be block device based, but don't really need this anymore either.
You're right.
Thanks!
-Lukas
Quoted 10 lines · Boaz Harrosh
Quoted 8 lines · Lukas Czerner
Gitweb: http://git.kernel.org/linus/367a51a339020ba4d9edb0ce0f21d65bd50b00c9 Commit: 367a51a339020ba4d9edb0ce0f21d65bd50b00c9 Parent: 77ca6cdf0ab8a42f481ec997911bc89e79138723 Author: Lukas Czerner <[email protected]> AuthorDate: Wed Oct 27 21:30:11 2010 -0400 Committer: Theodore Ts'o <[email protected]> CommitDate: Wed Oct 27 21:30:11 2010 -0400
Quoted 2 lines
I've just noticed this patch. Was it posted to linux-fsdevel? Sorry for missing it.
Yes it was, not long time ago.
Quoted 16 lines
So I have a comment, and question.
---Quoted 13 lines
fs: Add FITRIM ioctl
Adds an filesystem independent ioctl to allow implementation of file system batched discard support. I takes
fstrim_rangestructure as an argument.fstrim_rangeis definec in theinclude/fs.hand its definition is as follows.struct
fstrim_range{
start;
len;
minlen;
}
Quoted 8 lines
Quoted 6 lines
start - first Byte to trim
len - number of Bytes to trim from start
minlen - minimum extent length to trim, free extents shorter than this
number of Bytes will be ignored. This will be rounded up to fs block size.Was the range done so it could be called in parts, and progress displayed?
Yes, this is one of the reasons. Other is, that discard on some devices may take quite a while to complete and it is not very cheap operation either. So, instead of discarding the whole device, which may cause noticeable slowdown for other IO on that device for some time, we can do it for example by one allocation group at a time (or just generally per partes).
Quoted 44 lines
Quoted 44 lines
It is also possible to specify NULL as an argument. In this case the arguments will set itself as follows:
start = 0;
len =ULLONG_MAX;
minlen = 0;So it will trim the whole file system at one run.
After the FITRIM is done, the number of actually discarded Bytes is stored in fstrim_range.len to give the user better insight on how much storage space has been really released for wear-leveling.
Signed-off-by Lukas Czerner <[email protected]>Reviewed-by Dmitry Monakhov <[email protected]>Signed-off-by "Theodore Ts'o" <[email protected]>--- fs/ioctl.c | 39 +++++++++++++++++++++++++++++++++++++++ include/linux/fs.h | 8 ++++++++ 2 files changed, 47 insertions(+), 0 deletions(-)fs/ioctl.c +14
-0@@ -530,6 +530,41 @@ static int ioctl_fsthaw(struct file *filp)return thaw_super (sb); } +static int ioctl_fstrim (struct file *filp,void __user *argp) +{ +struct super_block *sb = filp->f_path.dentry->d_inode->i_sb; +struct fstrim_range range; +int ret =0 ; + +if (!capable (CAP_SYS_ADMIN )) +return -EPERM ; + +/* If filesystem doesn't support trim feature, return. */ +if (sb->s_op->trim_fs ==NULL ) +return -EOPNOTSUPP ; + +/* If a blockdevice-backed filesystem isn't specified, return EINVAL. */
Quoted 8 lines
fs/ioctl.c static int ioctl_fsthaw(struct file *filp) · line 549
Quoted 3 lines
fs/ioctl.c +3
-0+if (sb->s_bdev ==NULL ) +return -EINVAL ; +What is the point of that?
sb->s_bdevis not used anywhere in this code. If an FS published ansb->s_op->trim_fs, it should know what it wants No? Note that the FS in question does not even need to check. It already knows if it's block based or not.
Right, this was copied from fsfreeze and you are right it is not needed so it can be removed.
Quoted 3 lines
Thanks
Boaz
Thanks!
-Lukas