Skip to contentSkip to conversation

Does ip does support labels for IPv6 addresses?

DISCUSSION Heiko Gerstung 1 participant 1 message Oct 28, 2010

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

Hi !

Not sure if this is where I should ask, please feel free to send me to someone else.

I just tried to use "ip" (from the iproute2 project) to assign multiple IPv6 addresses to a physical network interface. In order to be able to distinguish between them, I wanted to use the "label" feature as described on the ip man page, but it seems that this is not supported for IPv6 addresses.

Does anybody know if this is a (documentation-)bug, a feature or a misconfiguration of ~/brain ?

Example:

# ip addr add dev eth0 2001::23/64 label eth0:0

at least adds the address correctly. But when I want to check with

# ip addr show
the label is not listed anywhere and using
# ip addr show label "eth0:0" does not work either (does not come up
with any output at all).

The description of the "label" option on the man page does not mention that this is not supported on IPv6.

Best Regards,
Heiko

Signature · 15 lines
Heiko Gerstung

*MEINBERG Funkuhren* GmbH & Co. KG
Lange Wand 9
D-31812 Bad Pyrmont, Germany
Phone: +49 (0)5281 9309-25
Fax: +49 (0)5281 9309-30
Amtsgericht Hannover 17HRA 100322
Geschäftsführer/Managing Directors: Günter Meinberg, Werner Meinberg,
Andre Hartmann, Heiko Gerstung
Email: [email protected] <mailto:[email protected]>
Web: www.meinberg.de <http://www.meinberg.de>

------------------------------------------------------------------------
*MEINBERG - Accurate Time Worldwide*