Skip to contentSkip to conversation

DRM: ignore invalid EDID extensions

PATCH In review sam tygier 2 participants 2 messages Oct 28, 2010

Subsystems (2)
lore
Share & tools
lore

sam tygier

author
#0 lore raw

PATCH 1/1 DRM: ignore invalid EDID extensions

Without this patch i get no display (X or VT) on myEIZO S2242W monitor when using KMS

This was discussed back in september, this is the second version of the patch based on ajax's comments. i have opened a bug for the issue:
https://bugs.freedesktop.org/show_bug.cgi?id=31154

Thanks

Sam

---

From 33d4041a583c417c00f71a5453fed6cff5278de5 Mon Sep 17 00:00:00 2001
From: Sam Tygier <[email protected]>
Date: Thu, 23 Sep 2010 10:11:01 +0100
Subject: [PATCH] DRM: ignore invalid EDID extensions

Currently an invalid EDID extension will cause the whole EDID to be considered invalid. Instead just drop the invalid extensions, and return the valid ones. The base block is modified to claim to have the number valid extensions, and the check sum is updated.

For my EIZO S2242W the base block is fine, but the extension block is all zeros. Without this patch I get no X and no VTs.

---
 drivers/gpu/drm/drm_edid.c |   26 ++++++++++++++++++++------
 1 files changed, 20 insertions(+), 6 deletions(-)
drivers/gpu/drm/drm_edid.c +20 -6
index 96e9631..2e208fa 100644
@@ -241,7 +241,7 @@ drm_do_probe_ddc_edid(struct i2c_adapter *adapter, unsigned char *buf,
             .addr    = DDC_ADDR,
             .flags    = I2C_M_RD,
             .len    = len,
-            .buf    = buf + start,
+            .buf    = buf,
         }
     };
 
@@ -254,7 +254,7 @@ drm_do_probe_ddc_edid(struct i2c_adapter *adapter, unsigned char *buf,
 static u8 *
 drm_do_get_edid(struct drm_connector *connector, struct i2c_adapter *adapter)
 {
-    int i, j = 0;
+    int i, j = 0, valid_extensions = 0;
     u8 *block, *new;
 
     if ((block = kmalloc(EDID_LENGTH, GFP_KERNEL)) == NULL)
@@ -281,14 +281,28 @@ drm_do_get_edid(struct drm_connector *connector, struct i2c_adapter *adapter)
 
     for (j = 1; j <= block[0x7e]; j++) {
         for (i = 0; i < 4; i++) {
-            if (drm_do_probe_ddc_edid(adapter, block, j,
-                          EDID_LENGTH))
+            if (drm_do_probe_ddc_edid(adapter,
+                  block + (valid_extensions + 1) * EDID_LENGTH,
+                  j, EDID_LENGTH))
                 goto out;
-            if (drm_edid_block_valid(block + j * EDID_LENGTH))
+            if (drm_edid_block_valid(block + (valid_extensions + 1) * EDID_LENGTH)) {
+                valid_extensions++;
                 break;
+            }
         }
         if (i == 4)
-            goto carp;
+            dev_warn(connector->dev->dev,
+             "%s: Ignoring invalid EDID block %d.\n",
+             drm_get_connector_name(connector), j);
+    }
+
+    if (valid_extensions != block[0x7e]) {
+        block[EDID_LENGTH-1] += block[0x7e] - valid_extensions;
+        block[0x7e] = valid_extensions;
+        new = krealloc(block, (valid_extensions + 1) * EDID_LENGTH, GFP_KERNEL);
+        if (!new)
+            goto out;
+        block = new;
     }
 
     return block;
Signature · 1 line
1.7.1
#1 lore raw

On 28.10.2010 11:12, wrote sam tygier:

Quoted 6 lines

Without this patch i get no display (X or VT) on myEIZO S2242W monitor when using KMS

This was discussed back in september, this is the second version of the patch based on ajax's comments. i have opened a bug for the issue:
https://bugs.freedesktop.org/show_bug.cgi?id=31154

Might this even be a cure for the bug in recent drm that ignores all 50Hz modes? The patch looks like that--without it--there isn't even an error displayed upon hitting a bad EDID record. I'm sorry I can't try this out at the moment though.

Regards,
Marius