Skip to contentSkip to conversation

[LTP] [Fwd: Query regarding termination_id=4 in LTP.]

LTP Subrata Modak 2 participants 2 messages Nov 3, 2010

lore
Share & tools
lore
#0 lore raw

FYI...!!

-------- Original Message --------
Subject: Query regarding termination_id=4 in LTP.
Date: Wed, 3 Nov 2010 12:08:56 +0530
From: [email protected]
To: [email protected]
CC: [email protected]

Hi,

I am not sure whom to ask this question so putting it here.
I am trying to run LTP on my arm based board and in some of the tests like shm_test01 and mtest05
I am getting termination_id=4.

So, I am stuck as theres no other information as to why these 2 tests failed. Could you help me out and tell me what does "termination_id=4" suggests ??

Log Snippet:
1) shm_test01 :
<<<test_start>>>
tag=stime=3934
cmdline="shm_test -l 10 -t 2"
contacts=""
analysis=exit
<<<test_output>>>
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=signaled termination_id=4 corefile=no cutime=0 cstime=0
<<<test_end>>>

2) mtest05
<<<test_start>>>
tag=mtest05 stime=3930
cmdline=" mmstress"
contacts=""
analysis=exit
<<<test_output>>>
mmstress 0 TINFO : run mmstress -h for all options
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=signaled termination_id=4 corefile=no cutime=0 cstime=0
<<<test_end>>

Regards,
Naren

------------------------------------------------------------------------------
Achieve Improved Network Security with IP and DNS Reputation. Defend against bad network traffic, including botnets, malware, phishing sites, and compromised hosts - saving your company time,
money, and embarrassment. Learn More!
http://p.sf.net/sfu/hpdev2dev-nov

_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list

#1 lore raw
Quoted 31 lines · Subrata Modak

FYI...!!

-------- Original Message -------- Subject: Query regarding termination_id=4 in LTP. Date: Wed, 3 Nov 2010 12:08:56 +0530 From:
[email protected] To: [email protected] CC:
[email protected]

Hi,

I am not sure whom to ask this question so putting it here.
I am trying to run LTP on my arm based board and in some of the tests like shm_test01 and mtest05
I am getting termination_id=4.

So, I am stuck as theres no other information as to why these 2 tests failed. Could you help me out and tell me what does "termination_id=4" suggests ??

Log Snippet:
1) shm_test01 :
<<<test_start>>>
tag=stime=3934
cmdline="shm_test -l 10 -t 2"
contacts=""
analysis=exit
<<<test_output>>>
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=signaled termination_id=4 corefile=no cutime=0 cstime=0
<<<test_end>>>

Quoted 15 lines

2) mtest05
<<<test_start>>>
tag=mtest05 stime=3930
cmdline=" mmstress"
contacts=""
analysis=exit
<<<test_output>>>
mmstress 0 TINFO : run mmstress -h for all options
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=signaled termination_id=4 corefile=no cutime=0 cstime=0
<<<test_end>>

No idea (could have exited with signal = 4, which is SIGILL, but I'm
looking at the BSD signals manpage). This could suggest a number of issues with how the tests are being executed on the board. strace'ing the tests and providing the board details would be a helpful start -- otherwise we can't help the end-user.
Thanks,
-Garrett

------------------------------------------------------------------------------
Achieve Improved Network Security with IP and DNS Reputation. Defend against bad network traffic, including botnets, malware, phishing sites, and compromised hosts - saving your company time,
money, and embarrassment. Learn More!
http://p.sf.net/sfu/hpdev2dev-nov

_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list