Skip to contentSkip to conversation

b43legacy: rfkill: use status register based on core revision (not PHY's)

PATCH New Rafał Miłecki 2 participants 2 messages Nov 3, 2010 Networking drivers (wireless)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 b43legacy: rfkill: use status register based on core revision (not PHY's)

---
With this patch we follow specs. I hope this will fix bug where radio was magically auto-turning on/off. Unfortunately I didn't get answer from reporter of that issue.

John: I suggest taking it for 2.6.38

---
 drivers/net/wireless/b43legacy/rfkill.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/net/wireless/b43legacy/rfkill.c +1 -1
index d579df7..b90f223 100644
@@ -29,7 +29,7 @@
 /* Returns TRUE, if the radio is enabled in hardware. */
 bool b43legacy_is_hw_radio_enabled(struct b43legacy_wldev *dev)
 {
-	if (dev->phy.rev >= 3) {
+	if (dev->dev->id.revision >= 3) {
 		if (!(b43legacy_read32(dev, B43legacy_MMIO_RADIO_HWENABLED_HI)
 		      & B43legacy_MMIO_RADIO_HWENABLED_HI_MASK))
 			return 1;
Signature · 1 line
1.6.0.4
#1 lore raw

PATCH 1/1 b43legacy: rfkill: use status register based on core revision (not PHY's)

Quoted 7 lines · Rafał Miłecki

---
With this patch we follow specs. I hope this will fix bug where radio was magically auto-turning on/off. Unfortunately I didn't get answer from reporter of that issue.

John: I suggest taking it for 2.6.38

ACK, both for the patch and the suggestion for the timing.

Larry