OMAP: wd_timer: update integration code to use new hwmod changes
Subsystems (4)
Paul Walmsley
maintainercover OMAP: wd_timer: update integration code to use new hwmod changes
Update the OMAP watchdog timer integration code to take advantage of the new hwmod upgrades added by the "OMAP2+: hwmod core upgrades for 2.6.38: first set" series, posted previously. So that series needs to be applied before these patches.
Charu, it would be great if you could take a look at these.
Tested on an OMAP34xx BeagleBoard with omap2plus_defconfig.
- Paul
---
wdt_2.6.38
text data bss dec hex filename
5709076 470560 5608992 11788628 b3e154 vmlinux.omap2plus_defconfig.orig
5708892 470560 5608992 11788444 b3e09c vmlinux.omap2plus_defconfig.patched
Paul Walmsley (3):
OMAP2+: wd_timer: separate watchdog disable code from the rest of mach-omap2/devices.c OMAP2+: wd_timer: disable on boot via hwmod postsetup mechanism
OMAP: wd_timer: remove old, dead probing code
arch/arm/mach-omap2/Makefile | 2 - arch/arm/mach-omap2/devices.c | 64 +--------------------------- arch/arm/mach-omap2/io.c | 18 ++++++++ arch/arm/mach-omap2/omap_hwmod_2420_data.c | 6 ++- arch/arm/mach-omap2/omap_hwmod_2430_data.c | 6 ++- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 6 ++- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 6 ++- arch/arm/mach-omap2/wd_timer.c | 54 ++++++++++++++++++++++++ arch/arm/mach-omap2/wd_timer.h | 17 +++++++ arch/arm/plat-omap/devices.c | 38 ----------------- 10 files changed, 108 insertions(+), 109 deletions(-) create mode 100644 arch/arm/mach-omap2/wd_timer.c create mode 100644 arch/arm/mach-omap2/wd_timer.h
Paul Walmsley
maintainerPATCH 1/3 OMAP2+: wd_timer: separate watchdog disable code from the rest of mach-omap2/devices.c
Split the wd_timer disable code out into its own file, mach-omap2/wd_timer.c; it belongs in its own file rather than cluttering up devices.c.
--- arch/arm/mach-omap2/Makefile | 2 + arch/arm/mach-omap2/devices.c | 55 +++----------------------------- arch/arm/mach-omap2/wd_timer.c | 68 ++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-omap2/wd_timer.h | 17 ++++++++++ 4 files changed, 91 insertions(+), 51 deletions(-) create mode 100644 arch/arm/mach-omap2/wd_timer.c create mode 100644 arch/arm/mach-omap2/wd_timer.h
arch/arm/mach-omap2/Makefile +1 -1
@@ -4,7 +4,7 @@ # Common support obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o \ - common.o + common.o wd_timer.o omap-2-3-common = irq.o sdrc.o prm2xxx_3xxx.o hwmod-common = omap_hwmod.o \
arch/arm/mach-omap2/devices.c +5 -50
80 lines not on this page · raw message
arch/arm/mach-omap2/wd_timer.c new file +68 -0
68 lines not on this page · raw message
arch/arm/mach-omap2/wd_timer.h new file +17 -0
@@ -0,0 +1,17 @@ +/* +* OMAP2+ MPU WD_TIMER-specific function prototypes +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +*/ + +#ifndef __ARCH_ARM_MACH_OMAP2_WD_TIMER_H +#define __ARCH_ARM_MACH_OMAP2_WD_TIMER_H + +#include <plat/omap_hwmod.h> + +extern int omap2_wd_timer_disable (struct omap_hwmod *oh); + +#endif
PATCH 1/3 OMAP2+: wd_timer: separate watchdog disable code from the rest of mach-omap2/devices.c
Hi Paul,
<<snip>>
...
arch/arm/mach-omap2/wd_timer.c line 36
Quoted 11 lines
arch/arm/mach-omap2/wd_timer.c new file +11
-0+ +int omap2_wd_timer_disable (struct omap_hwmod *oh) +{ +void __iomem *base; +int ret; + +if (!oh) { +pr_err ("%s: Could not look up wdtimer_hwmod\n" , __func__); +return -EINVAL ; + } +
Just a minor observation. I was wondering if we need this check because omap_hwmod_for_each_by_class(...) would call this only for valid oh.
list_for_each_entry(temp_oh, &omap_hwmod_list, node) {
if (!strcmp(temp_oh->class->name, classname)) {
pr_debug("omap_hwmod: %s: %s: calling callback fn\n",
__func__, temp_oh->name);
ret = (*fn)(temp_oh, user);--
Tarun
Paul Walmsley
maintainerPATCH 2/3 OMAP2+: wd_timer: disable on boot via hwmod postsetup mechanism
In reply to Paul WalmsleyThe OMAP watchdog timer IP blocks require a specific set of register writes to occur before they will be disabled[1], even if the device clocks appear to be disabled in the CM_*CLKEN registers. In the MPU watchdog case, failure to execute this reset sequence will eventually cause the watchdog to reset the OMAP unexpectedly.
Previously, the code to disable this watchdog was manually called from mach-omap2/devices.c during device initialization. This causes the watchdog to be unconditionally disabled for a portion of kernel initialization. This should be controllable by the board-*.c files, since some system integrators will want full watchdog coverage of kernel initialization. Also, the watchdog disable code was not connected to the hwmod shutdown code. This means that calling omap_hwmod_shutdown() will not, in fact, disable the watchdog, and the goal of omap_hwmod_shutdown() is to be able to shutdown any on-chip OMAP device.
To resolve the latter problem, populate the pre_shutdown pointer in the watchdog timer hwmod classes with a function that executes the watchdog shutdown sequence. This allows the hwmod code to fully disable the watchdog.
Then, to allow some board files to support watchdog coverage throughout kernel initialization, add common code to mach-omap2/io.c to cause the MPU watchdog to be disabled on boot unless a board file specifically requests it to remain enabled. Board files can do this by changing the watchdog timer hwmod's postsetup state between the omap2_init_common_infrastructure() and omap2_init_common_devices() function calls.
1. OMAP34xx Multimedia Device Silicon Revision 3.1.x Rev. ZH [SWPU222H], Section 16.4.3.6, "Start/Stop Sequence for WDTs (Using WDTi.WSPR Register)"
--- arch/arm/mach-omap2/devices.c | 15 --------------- arch/arm/mach-omap2/io.c | 18 ++++++++++++++++++ arch/arm/mach-omap2/omap_hwmod_2420_data.c | 6 ++++-- arch/arm/mach-omap2/omap_hwmod_2430_data.c | 6 ++++-- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 6 ++++-- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 6 ++++-- arch/arm/mach-omap2/wd_timer.c | 16 +--------------- 7 files changed, 35 insertions(+), 38 deletions(-)
arch/arm/mach-omap2/devices.c +0 -15
@@ -33,7 +33,6 @@#include "mux.h" #include "control.h" -#include "wd_timer.h" #if defined(CONFIG_VIDEO_OMAP2 ) || defined(CONFIG_VIDEO_OMAP2_MODULE )
@@ -952,26 +951,12 @@ static inline void omap_init_vout(void) {}/*-------------------------------------------------------------------------*/ -static int omap2_disable_wdt (struct omap_hwmod *oh,void *unused) -{ -return omap2_wd_timer_disable (oh); -} - -static void __init omap_disable_wdt (void ) -{ -if (cpu_class_is_omap2 ()) -omap_hwmod_for_each_by_class ("wd_timer" , - omap2_disable_wdt,NULL ); -return ; -} -static int __init omap2_init_devices (void ) {/* * please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. */ -omap_disable_wdt ();omap_hsmmc_reset ();omap_init_audio ();omap_init_camera ();
arch/arm/mach-omap2/io.c +18 -0
@@ -341,6 +341,24 @@ void __init omap2_init_common_infrastructure(void)#endif omap_hwmod_for_each (_set_hwmod_postsetup_state, &postsetup_state); +/* +* Set the default postsetup state for unusual modules (like +* MPU WDT). +* +* The postsetup_state is not actually used until +* omap_hwmod_late_init(), so boards that desire full watchdog +* coverage of kernel initialization can reprogram the +* postsetup_state between the calls to +* omap2_init_common_infra() and omap2_init_common_devices(). +* +* XXX ideally we could detect whether the MPU WDT was currently +* enabled here and make this conditional +*/ + postsetup_state = _HWMOD_STATE_DISABLED; +omap_hwmod_for_each_by_class ("wd_timer" , + _set_hwmod_postsetup_state, + &postsetup_state); +/* The OPP tables have to be registered before a clk init */ omap_pm_if_early_init (mpu_opps, dsp_opps, l3_opps);
arch/arm/mach-omap2/omap_hwmod_2420_data.c +4 -2
@@ -23,6 +23,7 @@#include "cm-regbits-24xx.h" #include "prm-regbits-24xx.h" +#include "wd_timer.h" /* * OMAP2420 hardware module integration data
@@ -307,8 +308,9 @@ static struct omap_hwmod_class_sysconfig omap2420_wd_timer_sysc = { };static struct omap_hwmod_class omap2420_wd_timer_hwmod_class = { - .name ="wd_timer" , - .sysc = &omap2420_wd_timer_sysc, + .name ="wd_timer" , + .sysc = &omap2420_wd_timer_sysc, + .pre_shutdown = &omap2_wd_timer_disable };/* wd_timer2 */
arch/arm/mach-omap2/omap_hwmod_2430_data.c +4 -2
@@ -23,6 +23,7 @@#include "prm-regbits-24xx.h" #include "cm-regbits-24xx.h" +#include "wd_timer.h" /* * OMAP2430 hardware module integration data
@@ -305,8 +306,9 @@ static struct omap_hwmod_class_sysconfig omap2430_wd_timer_sysc = { };static struct omap_hwmod_class omap2430_wd_timer_hwmod_class = { - .name ="wd_timer" , - .sysc = &omap2430_wd_timer_sysc, + .name ="wd_timer" , + .sysc = &omap2430_wd_timer_sysc, + .pre_shutdown = &omap2_wd_timer_disable };/* wd_timer2 */
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +4 -2
@@ -26,6 +26,7 @@#include "prm-regbits-34xx.h" #include "cm-regbits-34xx.h" +#include "wd_timer.h" /* * OMAP3xxx hardware module integration data
@@ -415,8 +416,9 @@ static struct omap_hwmod_class_sysconfig i2c_sysc = { };static struct omap_hwmod_class omap3xxx_wd_timer_hwmod_class = { - .name ="wd_timer" , - .sysc = &omap3xxx_wd_timer_sysc, + .name ="wd_timer" , + .sysc = &omap3xxx_wd_timer_sysc, + .pre_shutdown = &omap2_wd_timer_disable };/* wd_timer2 */
arch/arm/mach-omap2/omap_hwmod_44xx_data.c +4 -2
@@ -27,6 +27,7 @@#include "cm.h" #include "prm-regbits-44xx.h" +#include "wd_timer.h" /* Base offset for all OMAP4 interrupts external to MPUSS */ #define OMAP44XX_IRQ_GIC_START 32
@@ -716,8 +717,9 @@ static struct omap_hwmod_class_sysconfig omap44xx_uart_sysc = { };static struct omap_hwmod_class omap44xx_wd_timer_hwmod_class = { - .name ="wd_timer" , - .sysc = &omap44xx_wd_timer_sysc, + .name ="wd_timer" , + .sysc = &omap44xx_wd_timer_sysc, + .pre_shutdown = &omap2_wd_timer_disable };/* wd_timer2 */
arch/arm/mach-omap2/wd_timer.c +1 -15
@@ -27,7 +27,6 @@int omap2_wd_timer_disable (struct omap_hwmod *oh) {void __iomem *base; -int ret;if (!oh) {pr_err ("%s: Could not look up wdtimer_hwmod\n" , __func__);
@@ -41,14 +40,6 @@ int omap2_wd_timer_disable(struct omap_hwmod *oh)return -EINVAL ; } -/* Enable the clocks before accessing the WDT registers */ - ret =omap_hwmod_enable (oh); -if (ret) { -pr_err ("%s: Could not enable clocks for %s\n" , - oh->name, __func__); -return ret; - } -/* sequence required to disable watchdog */ __raw_writel (0xAAAA , base +OMAP_WDT_SPR );while (__raw_readl (base +OMAP_WDT_WPS ) &0x10 )
@@ -58,11 +49,6 @@ int omap2_wd_timer_disable(struct omap_hwmod *oh)while (__raw_readl (base +OMAP_WDT_WPS ) &0x10 )cpu_relax (); - ret =omap_hwmod_idle (oh); -if (ret) -pr_err ("%s: Could not disable clocks for %s\n" , - oh->name, __func__); - -return ret; +return 0 ; }
Paul Walmsley
maintainerPATCH 3/3 OMAP: wd_timer: remove old, dead probing code
In reply to Paul WalmsleyAfter commit f2ce62312650211f6cf665cd6dc519c334c4071e, watchdog probing is handled by files in mach-omap1/ and mach-omap2/, and the plat-omap/devices.c probing code is no longer used. Remove the dead code in plat-omap/devices.c.
--- arch/arm/plat-omap/devices.c | 38 -------------------------------------- 1 files changed, 0 insertions(+), 38 deletions(-)
arch/arm/plat-omap/devices.c +0 -38
@@ -234,44 +234,6 @@ static inline void omap_init_uwire(void) {}/*-------------------------------------------------------------------------*/ -#if defined(CONFIG_OMAP_WATCHDOG ) || defined(CONFIG_OMAP_WATCHDOG_MODULE ) - -static struct resource wdt_resources[] = { - { - .flags =IORESOURCE_MEM , - }, -}; - -static struct platform_device omap_wdt_device = { - .name ="omap_wdt" , - .id =-1 , - .num_resources =ARRAY_SIZE (wdt_resources), - .resource = wdt_resources, -}; - -static void omap_init_wdt (void ) -{ -if (cpu_is_omap16xx ()) - wdt_resources[0 ].start =0xfffeb000 ; -else if (cpu_is_omap2420 ()) - wdt_resources[0 ].start =0x48022000 ;/* WDT2 */ -else if (cpu_is_omap2430 ()) - wdt_resources[0 ].start =0x49016000 ;/* WDT2 */ -else if (cpu_is_omap343x ()) - wdt_resources[0 ].start =0x48314000 ;/* WDT2 */ -else if (cpu_is_omap44xx ()) - wdt_resources[0 ].start =0x4a314000 ; -else -return ; - - wdt_resources[0 ].end = wdt_resources[0 ].start +0x4f ; - - (void )platform_device_register (&omap_wdt_device); -} -#else -static inline void omap_init_wdt (void ) {} -#endif -#if defined(CONFIG_TIDSPBRIDGE ) || defined(CONFIG_TIDSPBRIDGE_MODULE )static phys_addr_t omap_dsp_phys_mempool_base;
PATCH 3/3 OMAP: wd_timer: remove old, dead probing code
Hello.
Quoted 1 line · Paul Walmsley
After commit
f2ce62312650211f6cf665cd6dc519c334c4071e, watchdog
Linus has asked to also specify the commit summary in parens...
Quoted 6 lines
probing is handled by files in mach-omap1/ and mach-omap2/, and the
plat-omap/devices.cprobing code is no longer used. Remove the dead code inplat-omap/devices.c.Signed-off-by Paul Walmsley<[email protected]>Cc Charulatha Varadarajan<[email protected]>
WBR, Sergei
Paul Walmsley
maintainerPATCH 3/3 OMAP: wd_timer: remove old, dead probing code
Quoted 5 lines · Sergei Shtylyov
Quoted 1 line · Paul Walmsley
After commit
f2ce62312650211f6cf665cd6dc519c334c4071e, watchdogLinus has asked to also specify the commit summary in parens...
Thanks, will do.
- Paul
Paul Walmsley
maintainerPATCH 3/3 OMAP: wd_timer: remove old, dead probing code
In reply to Paul WalmsleyHi,
Quoted 7 lines · Paul Walmsley
After commit
f2ce62312650211f6cf665cd6dc519c334c4071e, watchdog probing is handled by files in mach-omap1/ and mach-omap2/, and theplat-omap/devices.cprobing code is no longer used. Remove the dead code inplat-omap/devices.c.Signed-off-by Paul Walmsley <[email protected]>Cc Charulatha Varadarajan <[email protected]>
Dropping this patch since Tony merged Anand Gadiyar's fix for the same issue dated 3 December 2010.
- Paul
cover OMAP: wd_timer: update integration code to use new hwmod changes
In reply to Paul WalmsleyPaul,
Thanks for the series.
Quoted 6 lines · Paul Walmsley
Update the OMAP watchdog timer integration code to take advantage of the new hwmod upgrades added by the "OMAP2+: hwmod core upgrades for 2.6.38: first set" series, posted previously. ?So that series needs to be applied before these patches.
Charu, it would be great if you could take a look at these.
It looks fine for me.
-V Charulatha
Quoted 34 lines
Tested on an OMAP34xx BeagleBoard with
omap2plus_defconfig.- Paul
---
wdt_2.6.38
? text ? ?data ? ? bss ? ? dec ? ? hex filename
5709076 ?470560 5608992 11788628 b3e154 vmlinux.omap2plus_defconfig.orig 5708892 ?470560 5608992 11788444 b3e09c vmlinux.omap2plus_defconfig.patchedPaul Walmsley (3):
? ? ?OMAP2+:wd_timer: separate watchdog disable code from the rest ofmach-omap2/devices.c? ? ?OMAP2+:wd_timer: disable on boot via hwmod postsetup mechanism
? ? ?OMAP:wd_timer: remove old, dead probing code?arch/arm/mach-omap2/Makefile ? ? ? ? ? ? ? | ? ?2 - ?arch/arm/mach-omap2/devices.c ? ? ? ? ? ? ?| ? 64 +--------------------------- ?arch/arm/mach-omap2/io.c ? ? ? ? ? ? ? ? ? | ? 18 ++++++++ ?arch/arm/mach-omap2/omap_hwmod_2420_data.c | ? ?6 ++- ?arch/arm/mach-omap2/omap_hwmod_2430_data.c | ? ?6 ++- ?arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | ? ?6 ++- ?arch/arm/mach-omap2/omap_hwmod_44xx_data.c | ? ?6 ++- ?arch/arm/mach-omap2/wd_timer.c ? ? ? ? ? ? | ? 54 ++++++++++++++++++++++++ ?arch/arm/mach-omap2/wd_timer.h ? ? ? ? ? ? | ? 17 +++++++ ?arch/arm/plat-omap/devices.c ? ? ? ? ? ? ? | ? 38 -----------------?10 files changed, 108 insertions(+), 109 deletions(-) ?create mode 100644
arch/arm/mach-omap2/wd_timer.c?create mode 100644arch/arm/mach-omap2/wd_timer.h
Paul Walmsley
maintainercover OMAP: wd_timer: update integration code to use new hwmod changes
In reply to Paul WalmsleyQuoted 8 lines · Paul Walmsley
Update the OMAP watchdog timer integration code to take advantage of the new hwmod upgrades added by the "OMAP2+: hwmod core upgrades for 2.6.38: first set" series, posted previously. So that series needs to be applied before these patches.
Charu, it would be great if you could take a look at these.
Tested on an OMAP34xx BeagleBoard with
omap2plus_defconfig.
And these patches are also available as 'wdt_2.6.38' fromgit://git.pwsan.com/linux-2.6
- Paul