Skip to contentSkip to conversation

ALSA: HDA: Rename "Front" to "Master Front" on ALC861VD and ALC887

PATCH In review David Henningsson 3 participants 8 messages Nov 19, 2010 – Nov 23, 2010 Sound

lore
Share & tools
lore
#0 lore raw

PATCH 2/3 ALSA: HDA: Rename "Front" to "Master Front" on ALC861VD and ALC887

Since "Front" controls headphones as well on these two codecs, they should be labeled "Master Front" in order to be handled correct by PulseAudio.

Signature · 2 lines
David Henningsson, Canonical Ltd.
http://launchpad.net/~diwic
Quoted 1 line

From daf075d2301e9d2105ab3a5a6517ad72dbba7c7f Mon Sep 17 00:00:00 2001

From: David Henningsson <[email protected]>
Date: Tue, 16 Nov 2010 09:32:53 +0100
Subject: [PATCH 2/3] ALSA: HDA: Rename "Front" to "Master Front" on ALC861VD and ALC887

Since "Front" controls headphones as well on these two codecs, they should be labeled "Master Front" in order to be handled correct by PulseAudio.

---
 sound/pci/hda/patch_realtek.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
sound/pci/hda/patch_realtek.c +1 -1
index ce4017e..4cc7bb2 100644
@@ -16966,7 +16966,7 @@ static void alc861vd_auto_init_analog_input(struct hda_codec *codec)
 static int alc861vd_auto_create_multi_out_ctls(struct alc_spec *spec,
 					     const struct auto_pin_cfg *cfg)
 {
-	static const char *chname[4] = {"Front", "Surround", "CLFE", "Side"};
+	static const char *chname[4] = {"Master Front", "Surround", "CLFE", "Side"};
 	hda_nid_t nid_v, nid_s;
 	int i, err;
 
Signature · 1 line
1.7.1

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

#1 lore raw

At Fri, 19 Nov 2010 10:29:37 +0100,

Quoted 4 lines · David Henningsson

Since "Front" controls headphones as well on these two codecs, they should be labeled "Master Front" in order to be handled correct by PulseAudio.

Well, "Front" doesn't mean the physical output but rather the output channels. So, it doesn't conflict with the fact that this control actually changes all outputs, as long as the output jacks are of front channels. In that sense, even "Surround" is also a sort of Master control.

That being said, I'm not happy with this rename. If any, we should try to get rid of unnecessary front volume control. But, just because PA gets confused doesn't sound like a right reason.

Could you give the alsa-info.sh output for checking what mixer elements are created?

thanks,

Takashi

Quoted 6 lines
Signature · 2 lines
David Henningsson, Canonical Ltd.
http://launchpad.net/~diwic
#2 lore raw
Quoted 13 lines · Takashi Iwai

At Fri, 19 Nov 2010 10:29:37 +0100,

Quoted 4 lines · David Henningsson

Since "Front" controls headphones as well on these two codecs, they should be labeled "Master Front" in order to be handled correct by PulseAudio.

Well, "Front" doesn't mean the physical output but rather the output channels. So, it doesn't conflict with the fact that this control actually changes all outputs, as long as the output jacks are of front channels. In that sense, even "Surround" is also a sort of Master control.

Quoted 6 lines

That being said, I'm not happy with this rename. If any, we should try to get rid of unnecessary front volume control. But, just because PA gets confused doesn't sound like a right reason.

Could you give the alsa-info.sh output for checking what mixer elements are created?

As you know PulseAudio needs consistent naming of volume controls, and this is not expressed clearly enough in the docs, so, what would you call a volume control that controls a front-line-out, but does not control a front-speaker or a front-headphone? PulseAudio assumes that if a control is named "Front", it does just that. So that's why I would prefer a rename to "Master Front".

As for alsa-info output, I believe anything in hda-emu/codecs/alc861vd-* would do, as they have nsteps=0 on NIDs 0x0c - 0x0f.

Signature · 2 lines
David Henningsson, Canonical Ltd.
http://launchpad.net/~diwic
#3 lore raw

At Mon, 22 Nov 2010 09:42:46 +0100,

Quoted 19 lines · David Henningsson
Quoted 17 lines · Takashi Iwai

At Fri, 19 Nov 2010 10:29:37 +0100,

Quoted 4 lines · David Henningsson

Since "Front" controls headphones as well on these two codecs, they should be labeled "Master Front" in order to be handled correct by PulseAudio.

Well, "Front" doesn't mean the physical output but rather the output channels. So, it doesn't conflict with the fact that this control actually changes all outputs, as long as the output jacks are of front channels. In that sense, even "Surround" is also a sort of Master control.

That being said, I'm not happy with this rename. If any, we should try to get rid of unnecessary front volume control. But, just because PA gets confused doesn't sound like a right reason.

Quoted 7 lines
Quoted 2 lines

Could you give the alsa-info.sh output for checking what mixer elements are created?

As you know PulseAudio needs consistent naming of volume controls, and this is not expressed clearly enough in the docs, so, what would you call a volume control that controls a front-line-out, but does not control a front-speaker or a front-headphone?

What do you mean "front" in this context? Is it the front 2 channels out of 4.0 or 5.1 output? Or do you mean the physical location of the output? Front/Surround/Center/LFE are the former case. They are controls independent from the physical output locations (per definition).

I guess this confusion came up because of the mix-up with front channel and front panel. We've used "Front Mic" in some places, for example, which increases the confusion.

Quoted 6 lines

PulseAudio assumes that if
a control is named "Front", it does just that. So that's why I would prefer a rename to "Master Front".

As for alsa-info output, I believe anything in hda-emu/codecs/alc861vd-* would do, as they have nsteps=0 on NIDs 0x0c - 0x0f.

Yeah, the output with your first patch would be helpful.

thanks,

Takashi

#4 lore raw
Quoted 35 lines · Takashi Iwai

At Mon, 22 Nov 2010 09:42:46 +0100,

Quoted 19 lines · David Henningsson
Quoted 17 lines · Takashi Iwai

At Fri, 19 Nov 2010 10:29:37 +0100,

Quoted 4 lines · David Henningsson

Since "Front" controls headphones as well on these two codecs, they should be labeled "Master Front" in order to be handled correct by PulseAudio.

Well, "Front" doesn't mean the physical output but rather the output channels. So, it doesn't conflict with the fact that this control actually changes all outputs, as long as the output jacks are of front channels. In that sense, even "Surround" is also a sort of Master control.

That being said, I'm not happy with this rename. If any, we should try to get rid of unnecessary front volume control. But, just because PA gets confused doesn't sound like a right reason.

Quoted 7 lines
Quoted 2 lines

Could you give the alsa-info.sh output for checking what mixer elements are created?

As you know PulseAudio needs consistent naming of volume controls, and this is not expressed clearly enough in the docs, so, what would you call a volume control that controls a front-line-out, but does not control a front-speaker or a front-headphone?

What do you mean "front" in this context? Is it the front 2 channels out of 4.0 or 5.1 output? Or do you mean the physical location of the output? Front/Surround/Center/LFE are the former case. They are controls independent from the physical output locations (per definition).

Quoted 3 lines

I guess this confusion came up because of the mix-up with front channel and front panel. We've used "Front Mic" in some places, for example, which increases the confusion.

Good point. I think the reasoning so far is to refer to channels for output and location for input.

Anyway, what I meant was "Front" channel (not location), so let me rephrase my question into two:

1) If I find a volume control (or mute switch) labeled "Front", should I assume that it controls, or does not control, headphone output? How about internal speakers?

2) Assume I have a volume control (or mute switch) which controls only the front line-out, not headphones, and not speakers. How should I name it?

Quoted 8 lines
Quoted 6 lines

PulseAudio assumes that if
a control is named "Front", it does just that. So that's why I would prefer a rename to "Master Front".

As for alsa-info output, I believe anything in hda-emu/codecs/alc861vd-* would do, as they have nsteps=0 on NIDs 0x0c - 0x0f.

Yeah, the output with your first patch would be helpful.

Unfortunately I don't have access to the actual hardware at the moment, so I'm attaching a codec dump from the hardware before the patch. Running it against current HEAD, with today's patch from Kailang in, probably makes hda-emu take the wrong code path (since hda-emu can't read proc coefs).

Signature · 2 lines
David Henningsson, Canonical Ltd.
http://launchpad.net/~diwic

Codec: Realtek ALC887
Address: 0
Function Id: 0x1
Vendor Id: 0x10ec0887
Subsystem Id: 0x102804aa
Revision Id: 0x100302
No Modem Function Group found
Default PCM:

    rates [0x5f0]: 32000 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM

Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Device: name="ALC887 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x40]
Converter: stream=0, channel=0
PCM:

    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM

Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x40]
Converter: stream=0, channel=0
PCM:

    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM

Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x04 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x40]
Converter: stream=0, channel=0
PCM:

    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM

Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x05 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x40]
Converter: stream=0, channel=0
PCM:

    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM

Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="IEC958 Default PCM Playback Switch", index=0, device=0
Device: name="ALC887 Digital", type="SPDIF", device=1
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
PCM:

    rates [0x5f0]: 32000 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM

Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Control: name="Capture Switch", index=0, device=0
Control: name="Capture Volume", index=0, device=0
Device: name="ALC887 Analog", type="Audio", device=0 Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1 Amp-In vals: [0x0a 0x0a]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:

    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x23

Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Control: name="Capture Switch", index=1, device=0
Control: name="Capture Volume", index=1, device=0
Device: name="ALC887 Analog", type="Audio", device=2 Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1 Amp-In vals: [0x00 0x00]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:

    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x22

Node 0x0a [Audio Input] wcaps 0x100711: Stereo Digital
Converter: stream=0, channel=0
SDI-Select: 0
Digital:
Digital category: 0x0
PCM:

    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x1f
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Control: name="Mic Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Mic Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Front Mic Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=1, ofs=0
  Control: name="Front Mic Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=1, ofs=0
  Control: name="Line Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=2, ofs=0
  Control: name="Line Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=2, ofs=0
  Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 10
     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17
Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Control: name="Front Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Control: name="Front Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=2, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80]
  Connection: 2
     0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Control: name="Surround Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Control: name="Surround Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=2, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80]
  Connection: 2
     0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Control: name="Center Playback Volume", index=0, device=0
    ControlAmp: chs=1, dir=Out, idx=0, ofs=0
  Control: name="LFE Playback Volume", index=0, device=0
    ControlAmp: chs=2, dir=Out, idx=0, ofs=0
  Control: name="Center Playback Switch", index=0, device=0
    ControlAmp: chs=1, dir=In, idx=2, ofs=0
  Control: name="LFE Playback Switch", index=0, device=0
    ControlAmp: chs=2, dir=In, idx=2, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80]
  Connection: 2
     0x04 0x0b
Node 0x0f [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Control: name="Side Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Control: name="Side Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=2, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80]
  Connection: 2
     0x05 0x0b

Node 0x10 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:

    rates [0x5f0]: 32000 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM

Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x11 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1

     0x10

Node 0x12 [Pin Complex] wcaps 0x400401: Stereo
Pincap 0x00000020: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x0001003e: IN OUT HP EAPD Detect Trigger EAPD 0x0:
Pin Default 0x01014010: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1

     0x0c

Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x00000036: IN OUT Detect Trigger
Pin Default 0x01011012: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0x2
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1

     0x0d

Node 0x16 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x00000036: IN OUT Detect Trigger
Pin Default 0x01016011: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Orange
DefAssociation = 0x1, Sequence = 0x1
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1

     0x0e

Node 0x17 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x00000036: IN OUT Detect Trigger
Pin Default 0x01012014: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Grey
DefAssociation = 0x1, Sequence = 0x4
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1

     0x0f
Node 0x18 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
  Control: name="Mic Boost", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00003736: IN OUT Detect Trigger
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x01a19830: [Jack] Mic at Ext Rear
    Conn = 1/8, Color = Pink
    DefAssociation = 0x3, Sequence = 0x0
  Pin-ctls: 0x24: IN VREF_80
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 5
     0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x19 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
  Control: name="Front Mic Boost", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0000373e: IN OUT HP Detect Trigger
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x02a19831: [Jack] Mic at Ext Front
    Conn = 1/8, Color = Pink
    DefAssociation = 0x3, Sequence = 0x1
  Pin-ctls: 0x24: IN VREF_80
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 5
     0x0c* 0x0d 0x0e 0x0f 0x26

Node 0x1a [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x00003736: IN OUT Detect Trigger

    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x0181303f: [Jack] Line In at Ext Rear
    Conn = 1/8, Color = Blue
    DefAssociation = 0x3, Sequence = 0xf
  Pin-ctls: 0x20: IN VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 5
     0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
  Control: name="Headphone Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0001373e: IN OUT HP EAPD Detect Trigger
    Vref caps: HIZ 50 GRD 80 100
  EAPD 0x0:
  Pin Default 0x0221401f: [Jack] HP Out at Ext Front
    Conn = 1/8, Color = Green
    DefAssociation = 0x1, Sequence = 0xf
  Pin-ctls: 0xc0: OUT HP VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 5
     0x0c* 0x0d 0x0e 0x0f 0x26

Node 0x1c [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x00000024: IN Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x1d [Pin Complex] wcaps 0x400400: Mono
Pincap 0x00000020: IN
Pin Default 0x4005e601: [N/A] Line Out at Ext N/A
Conn = Optical, Color = White DefAssociation = 0x0, Sequence = 0x1
Pin-ctls: 0x20: IN
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x1e [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x01451120: [Jack] SPDIF Out at Ext Rear
Conn = Optical, Color = Black DefAssociation = 0x2, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1

     0x06

Node 0x1f [Pin Complex] wcaps 0x400681: Stereo Digital
Pincap 0x00000024: IN Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Processing caps: benign=0, ncoeff=24
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Control: name="Input Source", index=1, device=0
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 12

     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b 0x12

Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Control: name="Input Source", index=0, device=0
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 11

     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b

Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x25 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x40]
Converter: stream=0, channel=0
PCM:

    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM

Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x26 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2

     0x25 0x0b

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

#5 lore raw

2010/11/22 David Henningsson <[email protected]>

Quoted 7 lines

Unfortunately I don't have access to the actual hardware at the moment, so I'm attaching a codec dump from the hardware before the patch. Running it against current HEAD, with today's patch from Kailang in, probably makes hda-emu take the wrong code path (since hda-emu can't read proc coefs).

How about the volume control at node 0x25 ?

Is it "Independent headphone" for multi stream playback when 0x1b connected to 0x26 ?

alc887 has 5 [Audio Output], 0x02, 0x3, 0x04 ,0x05 and 0x25 and they are connected to 0x0c, 0x0d , 0x0e , 0x0f and 0x26 [audio mixer] mute switches

Node 0x25 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x40]
Converter: stream=0, channel=0
PCM:

    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM

Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x26 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2

     0x25 0x0b

Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Control: name="Headphone Playback Switch", index=0, device=0

    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0001373e: IN OUT HP EAPD Detect Trigger
    Vref caps: HIZ 50 GRD 80 100
  EAPD 0x0:
  Pin Default 0x0221401f: [Jack] HP Out at Ext Front
    Conn = 1/8, Color = Green
    DefAssociation = 0x1, Sequence = 0xf
  Pin-ctls: 0xc0: OUT HP VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 5
     0x0c* 0x0d 0x0e 0x0f 0x26
#6 lore raw
In reply to David Henningsson

At Mon, 22 Nov 2010 15:59:58 +0100,

Quoted 44 lines · David Henningsson
Quoted 35 lines · Takashi Iwai

At Mon, 22 Nov 2010 09:42:46 +0100,

Quoted 19 lines · David Henningsson
Quoted 17 lines · Takashi Iwai

At Fri, 19 Nov 2010 10:29:37 +0100,

Quoted 4 lines · David Henningsson

Since "Front" controls headphones as well on these two codecs, they should be labeled "Master Front" in order to be handled correct by PulseAudio.

Well, "Front" doesn't mean the physical output but rather the output channels. So, it doesn't conflict with the fact that this control actually changes all outputs, as long as the output jacks are of front channels. In that sense, even "Surround" is also a sort of Master control.

That being said, I'm not happy with this rename. If any, we should try to get rid of unnecessary front volume control. But, just because PA gets confused doesn't sound like a right reason.

Quoted 7 lines
Quoted 2 lines

Could you give the alsa-info.sh output for checking what mixer elements are created?

As you know PulseAudio needs consistent naming of volume controls, and this is not expressed clearly enough in the docs, so, what would you call a volume control that controls a front-line-out, but does not control a front-speaker or a front-headphone?

What do you mean "front" in this context? Is it the front 2 channels out of 4.0 or 5.1 output? Or do you mean the physical location of the output? Front/Surround/Center/LFE are the former case. They are controls independent from the physical output locations (per definition).

Quoted 3 lines

I guess this confusion came up because of the mix-up with front channel and front panel. We've used "Front Mic" in some places, for example, which increases the confusion.

Good point. I think the reasoning so far is to refer to channels for output and location for input.

Quoted 6 lines

Anyway, what I meant was "Front" channel (not location), so let me rephrase my question into two:

1) If I find a volume control (or mute switch) labeled "Front", should I assume that it controls, or does not control, headphone output? How about internal speakers?

Yes, this should be applied to all outputs in general. (There might be some misuses, though...)

Quoted 2 lines

2) Assume I have a volume control (or mute switch) which controls only the front line-out, not headphones, and not speakers. How should I name it?

A good question. We should have a unified prefix for the location. IIRC, "Front Line-Out" or "Front XXX" are used indeed, so far.

Quoted 7 lines
Quoted 7 lines
Quoted 6 lines

PulseAudio assumes that if
a control is named "Front", it does just that. So that's why I would prefer a rename to "Master Front".

As for alsa-info output, I believe anything in hda-emu/codecs/alc861vd-* would do, as they have nsteps=0 on NIDs 0x0c - 0x0f.

Quoted 7 lines
Quoted 1 line

Yeah, the output with your first patch would be helpful.

Unfortunately I don't have access to the actual hardware at the moment, so I'm attaching a codec dump from the hardware before the patch. Running it against current HEAD, with today's patch from Kailang in, probably makes hda-emu take the wrong code path (since hda-emu can't read proc coefs).

Indeed, something is still fishy there.
OK, we need to fix it again...

thanks,

Takashi

#7 lore raw

At Tue, 23 Nov 2010 09:05:09 +0100,

Quoted 72 lines · Takashi Iwai

At Mon, 22 Nov 2010 15:59:58 +0100,

Quoted 44 lines · David Henningsson
Quoted 35 lines · Takashi Iwai

At Mon, 22 Nov 2010 09:42:46 +0100,

Quoted 19 lines · David Henningsson
Quoted 17 lines · Takashi Iwai

At Fri, 19 Nov 2010 10:29:37 +0100,

Quoted 4 lines · David Henningsson

Since "Front" controls headphones as well on these two codecs, they should be labeled "Master Front" in order to be handled correct by PulseAudio.

Well, "Front" doesn't mean the physical output but rather the output channels. So, it doesn't conflict with the fact that this control actually changes all outputs, as long as the output jacks are of front channels. In that sense, even "Surround" is also a sort of Master control.

That being said, I'm not happy with this rename. If any, we should try to get rid of unnecessary front volume control. But, just because PA gets confused doesn't sound like a right reason.

Quoted 7 lines
Quoted 2 lines

Could you give the alsa-info.sh output for checking what mixer elements are created?

As you know PulseAudio needs consistent naming of volume controls, and this is not expressed clearly enough in the docs, so, what would you call a volume control that controls a front-line-out, but does not control a front-speaker or a front-headphone?

What do you mean "front" in this context? Is it the front 2 channels out of 4.0 or 5.1 output? Or do you mean the physical location of the output? Front/Surround/Center/LFE are the former case. They are controls independent from the physical output locations (per definition).

Quoted 3 lines

I guess this confusion came up because of the mix-up with front channel and front panel. We've used "Front Mic" in some places, for example, which increases the confusion.

Good point. I think the reasoning so far is to refer to channels for output and location for input.

Quoted 6 lines

Anyway, what I meant was "Front" channel (not location), so let me rephrase my question into two:

1) If I find a volume control (or mute switch) labeled "Front", should I assume that it controls, or does not control, headphone output? How about internal speakers?

Yes, this should be applied to all outputs in general. (There might be some misuses, though...)

Quoted 2 lines

2) Assume I have a volume control (or mute switch) which controls only the front line-out, not headphones, and not speakers. How should I name it?

A good question. We should have a unified prefix for the location. IIRC, "Front Line-Out" or "Front XXX" are used indeed, so far.

Quoted 9 lines
Quoted 8 lines
Quoted 6 lines

PulseAudio assumes that if
a control is named "Front", it does just that. So that's why I would prefer a rename to "Master Front".

As for alsa-info output, I believe anything in hda-emu/codecs/alc861vd-* would do, as they have nsteps=0 on NIDs 0x0c - 0x0f.

Yeah, the output with your first patch would be helpful.

Quoted 8 lines
Quoted 5 lines

Unfortunately I don't have access to the actual hardware at the moment, so I'm attaching a codec dump from the hardware before the patch. Running it against current HEAD, with today's patch from Kailang in, probably makes hda-emu take the wrong code path (since hda-emu can't read proc coefs).

Indeed, something is still fishy there.
OK, we need to fix it again...

I guess it's because the driver checks the COEF to identify the chip model, but hda-emu doesn't provide it properly.

Takashi