Skip to contentSkip to conversation

Kernel build under meta-toolchain SDK fails

DISCUSSION Ben Gamari 2 participants 2 messages Nov 23, 2010 Kbuild

lore
Share & tools
lore

Ben Gamari

author
#0 lore raw

Hey all,

Recently I tried updating our openembedded environment for an embedded application built around the BeagleBoard. Unfortunately, the build failed while configuring the kernel with an inexplicable bus error. To trace down the issue I installed the latest meta-toolchain sdk and tried building a kernel. This resulted in an identical failure,

$ make
  HOSTCC  scripts/basic/fixdep
In file included from /usr/local/angstrom/arm/arm-angstrom-linux-gnueabi/usr/include/stdlib.h:903,
                 from scripts/basic/fixdep.c:112:
/usr/local/angstrom/arm/arm-angstrom-linux-gnueabi/usr/include/bits/stdlib.h:65: warning: no previous prototype for ‘ptsname_r’
/bin/sh: line 1:  4192 Bus error               scripts/basic/fixdep scripts/basic/.fixdep.d scripts/basic/fixdep 'gcc -Wp,-MD,scripts/basic/.fixdep.d -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer     -o scripts/basic/fixdep scripts/basic/fixdep.c  ' > scripts/basic/.fixdep.tmp
make[2]: *** [scripts/basic/fixdep] Error 135
make[1]: *** [scripts_basic] Error 2
make: *** No rule to make target `include/config/auto.conf', needed by `include/config/kernel.release'.  Stop.

The problem is quite early in the build since even make oldconfig fails in this way. I tried tracking down the bug on the LKML[1] but after some discussion it seems very likely the problem is a toolchain issue. At least part of the problem seems to be in fixdep, which fails very strangely in fstat[2]. I've done quite a bit of debugging[2], but it seems to be a bit of a heisenbug.

Interestingly enough, I can reproduce the issue both on my personal laptop (running Ubuntu 10.10, gcc 4.4.5) and our build server (running Ubuntu 10.04, gcc 4.4.3). It would be great if someone could try building a kernel from master using openembedded master. Otherwise, any ideas would be greatly appreciated.

Cheers,

- Ben

[1] http://lkml.org/lkml/2010/11/6/90
[2] http://lkml.org/lkml/2010/11/7/78

#1 lore raw
Quoted 25 lines · Ben Gamari

Hey all,

Recently I tried updating our openembedded environment for an embedded application built around the BeagleBoard. Unfortunately, the build failed while configuring the kernel with an inexplicable bus error. To trace down the issue I installed the latest meta-toolchain sdk and tried building a kernel. This resulted in an identical failure,

$ make
   HOSTCC  scripts/basic/fixdep
In file included from /usr/local/angstrom/arm/arm-angstrom-linux-gnueabi/usr/include/stdlib.h:903,
                  from scripts/basic/fixdep.c:112:
/usr/local/angstrom/arm/arm-angstrom-linux-gnueabi/usr/include/bits/stdlib.h:65: warning: no previous prototype for ‘ptsname_r’
/bin/sh: line 1:  4192 Bus error               scripts/basic/fixdep scripts/basic/.fixdep.d scripts/basic/fixdep 'gcc -Wp,-MD,scripts/basic/.fixdep.d -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer     -o scripts/basic/fixdep scripts/basic/fixdep.c  '>  scripts/basic/.fixdep.tmp
make[2]: *** [scripts/basic/fixdep] Error 135
make[1]: *** [scripts_basic] Error 2
make: *** No rule to make target `include/config/auto.conf', needed by `include/config/kernel.release'.  Stop.

The problem is quite early in the build since even make oldconfig fails in this way. I tried tracking down the bug on the LKML[1] but after some discussion it seems very likely the problem is a toolchain issue. At least part of the problem seems to be in fixdep, which fails very strangely in fstat[2]. I've done quite a bit of debugging[2], but it seems to be a bit of a heisenbug.

Quoted 5 lines

Interestingly enough, I can reproduce the issue both on my personal laptop (running Ubuntu 10.10, gcc 4.4.5) and our build server (running Ubuntu 10.04, gcc 4.4.3). It would be great if someone could try building a kernel from master using openembedded master. Otherwise, any ideas would be greatly appreciated.

What's your kernel config or env look like? It looks like you're trying to use the cross compiler as the host compiler and that won't fly :)

Signature · 2 lines
Tom Rini
Mentor Graphics Corporation