Skip to contentSkip to conversation

ahci: add another PCI ID for marvell

PATCH In review Tejun Heo 2 participants 4 messages Nov 29, 2010 – Mar 15, 2011 libata

lore
Share & tools
lore

Tejun Heo

author
#0 lore raw

PATCH 1/1 ahci: add another PCI ID for marvell

1b4b:91a3 seems to be another PCI ID for marvell ahci. Add it. Reported and tested in the following thread.

http://thread.gmane.org/gmane.linux.kernel/1068354

---
 drivers/ata/ahci.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/ata/ahci.c +2 -0
index 3288263..0c39fbb 100644
@@ -380,6 +380,8 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(MARVELL, 0x6121), board_ahci_mv },	/* 6121 */
 	{ PCI_DEVICE(0x1b4b, 0x9123),
 	  .driver_data = board_ahci_yes_fbs },			/* 88se9128 */
+	{ PCI_DEVICE(0x1b4b, 0x91a3),
+	  .driver_data = board_ahci_yes_fbs },
 
 	/* Promise */
 	{ PCI_VDEVICE(PROMISE, 0x3f20), board_ahci },	/* PDC42819 */
#2 lore raw
Quoted 11 lines · Tejun Heo
Quoted 8 lines · Tejun Heo

1b4b:91a3 seems to be another PCI ID for marvell ahci. Add it. Reported and tested in the following thread.

http://thread.gmane.org/gmane.linux.kernel/1068354

Jeff, ping?

Missed this one, for some reason. Found, and queued.

Will go in the push to Linus this week, but due to LCA he might not pull for a bit.

#3 lore raw
In reply to Tejun Heo
Quoted 11 lines · Tejun Heo

1b4b:91a3 seems to be another PCI ID for marvell ahci. Add it. Reported and tested in the following thread.

http://thread.gmane.org/gmane.linux.kernel/1068354

---
  drivers/ata/ahci.c |    2 ++
  1 file changed, 2 insertions(+)

Found this one in the dustbin while searching around... still needed, apparently. Resurrected and applied.