How to get medium (carrier-sense) information from Atheros chipsets?
Hello,
I'm working on a research project dealing with real-time capabilities of WLAN. Currently I'm analyzing the ATH5K driver and trying to find a way to get information about the medium state (carrier-sense state) . I want to check whether the medium is currently occupied by other stations or not. Is there a way to get the carrier sense information from the hardware through a status-register or so? (Currently we have a AR5413 Chip, but any other would also be OK) The only information i found was about the profile count registers, which doesn't really meet our requirements.
I greatly appreciate your help
Kind regards
Stefan Schwalowsky
Have a look at the ANI file in/sys/kernel/debug/ieee80211/phyx/ath5k/ani
You will need to enable debugfs & debug entries for ath5k in your kernel config.
Alternatively, you can look at the patches Bruno Randolf added:
[PATCH 2/2] ath5k: Add channel time to survey data
Cheers,
--
Jonathan Guerin
Quoted 20 lines · Stefan Schwalowsky (inIT)
Hello,
I'm working on a research project dealing with real-time capabilities of WLAN. Currently I'm analyzing the ATH5K driver and trying to find a way to get information about the medium state (carrier-sense state) . I want to check whether the medium is currently occupied by other stations or not. Is there a way to get the carrier sense information from the hardware through a status-register or so? (Currently we have a AR5413 Chip, but any other would also be OK) The only information i found was about the profile count registers, which doesn't really meet our requirements.I greatly appreciate your help
Kind regards
Stefan Schwalowsky--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html