Skip to contentSkip to conversation

Making using layers even friendlier

PATCH In review Gary Thomas 2 participants 2 messages Dec 8, 2010 – Dec 9, 2010

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Making using layers even friendlier

I'm building poky for a number of unique platforms which I want to keep logically separate. By using the new BBLAYERS support, this is working out quite well.

However, I find it cumbersome to start a new build for a given platform. This is because conf/local.conf and conf/bblayers.conf need to be tailored for that platform. In particular, the file conf/bblayers.conf needs to be modified to incorporate the meta layers used by the given platform.

By incorporating the attached patch, this can now be done easily on the initial build tree setup. Just run something like this:
% POKYCONF=meta-board1/conf . <POKYBASE>/poky-init-build-env my_build_tree
As the build tree is set up, the files from <POKYBASE>/meta-board1/conf will be used to populate the <BUILD>/conf directory. These can then be adjusted as necessary. The patch allows for the provided config files to be either <POKYBASE> relative or absolute, allowing even more flexibility.

Comments?

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------

From 2323932145370e2fea2a427c3c493d04b043981b Mon Sep 17 00:00:00 2001
From: Gary Thomas <[email protected]>
Date: Wed, 8 Dec 2010 05:59:09 -0700
Subject: [PATCH] Allow the environment variable POKYCONF to provide the basis for the working "conf" directory.

By using the POKYCONF variable, a meta layer can provide the basic setup for files to be used during a build. This is similar to the default values stored in the main meta tree, .../meta/conf/local.conf.sample, etc

---
 scripts/poky-env-internal |   18 ++++++++++++++++++
 1 files changed, 18 insertions(+), 0 deletions(-)
scripts/poky-env-internal +18 -0
index 5b206ed..c8b39c9 100755
@@ -58,6 +58,24 @@ if ! (test -d "$BITBAKEDIR" && test -d "$BUILDDIR"); then
     return
 fi
 
+# 
+# $POKYCONF can point to a directory for the template local.conf & bblayers.conf
+#
+if [ "x" != "x$POKYCONF" ]; then
+    if ! (test -d "$POKYCONF"); then
+	# Allow POKYCONF=meta-xyz/conf as a shortcut
+	if [ -d "$OEROOT/$POKYCONF" ]; then
+	    POKYCONF="$OEROOT/$POKYCONF"
+	fi
+	if ! (test -d "$POKYCONF"); then
+	    echo >&2 "Error: '$POKYCONF' must be a directory containing local.conf & bblayers.conf"
+	    return
+	fi
+    fi
+    POKYLAYERCONF="$POKYCONF/bblayers.conf"
+    POKYLOCALCONF="$POKYCONF/local.conf"
+fi
+
 if [ "x" = "x$POKYLOCALCONF" ]; then
     POKYLOCALCONF="$OEROOT/meta/conf/local.conf.sample"
 fi
Signature · 1 line
1.7.2.3
#1 lore raw
Quoted 19 lines · Gary Thomas

I'm building poky for a number of unique platforms which I want to keep logically separate. By using the new BBLAYERS support, this is working out quite well.

However, I find it cumbersome to start a new build for a given platform. This is because conf/local.conf and conf/bblayers.conf need to be tailored for that platform. In particular, the file conf/bblayers.conf needs to be modified to incorporate the meta layers used by the given platform.

By incorporating the attached patch, this can now be done easily on the initial build tree setup. Just run something like this:
% POKYCONF=meta-board1/conf . <POKYBASE>/poky-init-build-env my_build_tree
As the build tree is set up, the files from <POKYBASE>/meta-board1/conf will be used to populate the <BUILD>/conf directory. These can then be adjusted as necessary. The patch allows for the provided config files to be either <POKYBASE> relative or absolute, allowing even more flexibility.

Quoted 1 line

Comments?

I think its a reasonable idea and I've added it to master.

Cheers,

Richard