Skip to contentSkip to conversation

Undefined Symbols with AT91RM9200DK_CONFIG

U-Boot James Kosin 2 participants 3 messages Dec 9, 2010

lore
Share & tools
lore
#0 lore raw

With the latest from the u-boot-atmel area, the symbols below don't seem to be defined.

Thanks,
James

--- error
arm-eabi-gcc -g -Os -fno-common -ffixed-r8 -msoft-float
-D__KERNEL__ -DCONF
IG_SYS_TEXT_BASE=0x21f00000 -I/home/jkosin/git/u-boot-atmel/include -fno-builtin
-ffreestanding -nostdinc -isystem
/home/jkosin/opt/armThumb-4.5.0/lib/gcc/arm-e abi/4.5.1/include -pipe -DCONFIG_ARM -D__ARM__ -marm -mabi=aapcs-linux -mno-th
umb-interwork -march=armv4 -Wall -Wstrict-prototypes
-fno-stack-protector \
-o board.o board.c -c
board.c: In function `__dram_init_banksize':
board.c:233:29: error: `CONFIG_SYS_SDRAM_BASE' undeclared (first use in this fun
ction)
board.c:233:29: note: each undeclared identifier is reported only once for each
function it appears in
board.c: In function `board_init_f':
board.c:279:17: error: `CONFIG_SYS_INIT_SP_ADDR' undeclared (first use in this f
unction)
board.c:312:9: error: `CONFIG_SYS_SDRAM_BASE' undeclared (first use in this func
tion)
make[1]: *** [board.o] Error 1
make[1]: Leaving directory `/home/jkosin/git/u-boot-atmel/arch/arm/lib'
make: *** [arch/arm/lib/libarm.o] Error 2
--- end

Signature · 9 lines
James Kosin
Senior Software Engineer

International Communications Group, Inc.
230 Pickett's Line
Newport News, Virginia  23603

Phone: +1 (757) 947-1030 x 122
Fax:   +1 (757) 947-1035
#1 lore raw

Dear James Kosin,

Am 09.12.2010 17:49, schrieb James Kosin:

Quoted 2 lines

With the latest from the u-boot-atmel area, the symbols below don't seem to be defined.

at91rm9200dk is orphaned. We had a lot of changes for arm devices and a lot of them do not work now. Please see git history what I did for at91rm9200ek to get at91rm9200dk working.

Maybe ask Rick Bronson to to take over that board cause he did not provide patches for that board til now.

When you compare the changes to at91rm9200ek to your board you may get it working very fast.

Remove of at91rm9200 boards which do _not_ use at91 will be removed soon. That was announced some time ago, but there is no real dead line for that. I think it would be a good idea to remove at91rm9200 boards when we remove other unsupported arm boards which will be done some day in 2011.

regards

Andreas Bie?mann

#2 lore raw
Quoted 21 lines · Andreas Bie?mann

Dear James Kosin,

Am 09.12.2010 17:49, schrieb James Kosin:

Quoted 2 lines

With the latest from the u-boot-atmel area, the symbols below don't seem to be defined.

at91rm9200dk is orphaned. We had a lot of changes for arm devices and a lot of them do not work now. Please see git history what I did for at91rm9200ek to get at91rm9200dk working.

Maybe ask Rick Bronson to to take over that board cause he did not provide patches for that board til now.

When you compare the changes to at91rm9200ek to your board you may get it working very fast.

Remove of at91rm9200 boards which do _not_ use at91 will be removed soon. That was announced some time ago, but there is no real dead line for that. I think it would be a good idea to remove at91rm9200 boards when we remove other unsupported arm boards which will be done some day in 2011.

Quoted 4 lines

regards

Andreas Bie?mann

Thanks for the details.

James Kosin