Skip to contentSkip to conversation

Milestone 2 Stabilization Branch Created (Resend)

DISCUSSION Saul Wold 4 participants 6 messages Dec 11, 2010 – Dec 13, 2010

lore
Share & tools
lore

Saul Wold

author
#0 lore raw

[Resend with correct mailing lists]

Yocto / Poky Folks:

Thanks to everyone's hard work, we are currently on working getting the first build of M2 started and available for QA testing on Monday.

I have pushed out the lastest commit that was pending in the distro/master area to both master and create a builds/milestone branch which is where bug fixes for M2 will go.

There is currently an issue with the PPC Kernel build on this branch and that is being worked, this may impact getting a PPC build available by Monday.

For the next week as we stabilize M2, please ensure that any patch or pull requests indicate that this is for M2 or not. By default all commits will go to master regardless.

Thanks
Sau!

Saul Wold
Yocto Component Wrangler @ Intel
Yocto Project / Poky Build System

#1 lore raw
Quoted 12 lines

[Resend with correct mailing lists]

Yocto / Poky Folks:

Thanks to everyone's hard work, we are currently on working getting the first build of M2 started and available for QA testing on Monday.

I have pushed out the lastest commit that was pending in the distro/master area to both master and create a builds/milestone branch which is where bug fixes for M2 will go.

Quoted 7 lines

There is currently an issue with the PPC Kernel build on this branch and that is being worked, this may impact getting a PPC build available by Monday.

For the next week as we stabilize M2, please ensure that any patch or pull requests indicate that this is for M2 or not. By default all commits will go to master regardless.

Hi Saul,
Nightly build is near finished now. PPC and some non-x86 real hardware target building failed. I begin downloading them now and will start QA testing.

Quoted 10 lines

Thanks
Sau!
Saul Wold
Yocto Component Wrangler @ Intel
Yocto Project / Poky Build System

_______________________________________________
poky mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/poky

Best Regards,
Jiajun

#2 lore raw
Quoted 15 lines · Jiajun
Quoted 15 lines

[Resend with correct mailing lists]

Yocto / Poky Folks:

Thanks to everyone's hard work, we are currently on working getting the first build of M2 started and available for QA testing on Monday.

I have pushed out the lastest commit that was pending in the distro/master area to both master and create a builds/milestone branch which is where bug fixes for M2 will go.

There is currently an issue with the PPC Kernel build on this branch and that is being worked, this may impact getting a PPC build available by Monday.

Quoted 7 lines
Quoted 4 lines

For the next week as we stabilize M2, please ensure that any patch or pull requests indicate that this is for M2 or not.  By default all commits will go to master regardless.

Hi Saul,
Nightly build is near finished now. PPC and some non-x86 real hardware target building failed. I begin downloading them now and will start QA testing.

Is there somewhere I can check a log of the build errors ? We flipped in the 2.6.37 kernel and associated tools, but the any hardware targets should still be building 2.6.34 and be unaffected.

If it isn't a kernel that failed to build .. then I'm less help :)

Cheers,

Bruce

Quoted 20 lines
Quoted 11 lines

Thanks
     Sau!
Saul Wold
Yocto Component Wrangler @ Intel
Yocto Project / Poky Build System

_______________________________________________
poky mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/poky

Best Regards,
Jiajun

_______________________________________________
poky mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/poky

Signature · 2 lines
"Thou shalt not follow the NULL pointer, for chaos and madness await
thee at its end"
#3 lore raw
Quoted 25 lines · Jiajun
Quoted 16 lines
Quoted 16 lines

[Resend with correct mailing lists]

Yocto / Poky Folks:

Thanks to everyone's hard work, we are currently on working getting the first build of M2 started and available for QA testing on Monday.

I have pushed out the lastest commit that was pending in the distro/master area to both master and create a builds/milestone branch which is where bug fixes for M2 will go.

There is currently an issue with the PPC Kernel build on this branch and that is being worked, this may impact getting a PPC build available by Monday.

Quoted 8 lines
Quoted 4 lines

For the next week as we stabilize M2, please ensure that any patch or pull requests indicate that this is for M2 or not.  By default all commits will go to master regardless.

Hi Saul,
Nightly build is near finished now. PPC and some non-x86 real hardware

Quoted 9 lines

target building failed. I begin downloading them now and will start QA testing.

Is there somewhere I can check a log of the build errors ? We flipped in the
2.6.37 kernel and associated tools, but the any hardware targets should still be building 2.6.34 and be unaffected.

If it isn't a kernel that failed to build .. then I'm less help :)

For beagleboard, http://autobuilder.pokylinux.org:8010/builders/nightly-release/builds/146/steps/shell_46/logs/stdio/text.
For mpc8315e-rdb, http://autobuilder.pokylinux.org:8010/builders/nightly-release/builds/146/steps/shell_49/logs/stdio/text.

Quoted 27 lines

Cheers,

Bruce

Quoted 20 lines
Quoted 11 lines

Thanks
     Sau!
Saul Wold
Yocto Component Wrangler @ Intel
Yocto Project / Poky Build System

_______________________________________________
poky mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/poky

Best Regards,
Jiajun

_______________________________________________
poky mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/poky

Best Regards,
Jiajun

#4 lore raw
Quoted 32 lines · Jiajun
Quoted 32 lines · Jiajun
Quoted 16 lines
Quoted 16 lines

[Resend with correct mailing lists]

Yocto / Poky Folks:

Thanks to everyone's hard work, we are currently on working getting the first build of M2 started and available for QA testing on Monday.

I have pushed out the lastest commit that was pending in the distro/master area to both master and create a builds/milestone branch which is where bug fixes for M2 will go.

There is currently an issue with the PPC Kernel build on this branch and that is being worked, this may impact getting a PPC build available by Monday.

Quoted 8 lines
Quoted 4 lines

For the next week as we stabilize M2, please ensure that any patch or pull requests indicate that this is for M2 or not. By default all commits will go to master regardless.

Hi Saul,
Nightly build is near finished now. PPC and some non-x86 real hardware

target building failed. I begin downloading them now and will start QA testing.

Is there somewhere I can check a log of the build errors ? We flipped in the
2.6.37 kernel and associated tools, but the any hardware targets should still be building 2.6.34 and be unaffected.

Quoted 5 lines
Quoted 2 lines

If it isn't a kernel that failed to build .. then I'm less help :)

For beagleboard, http://autobuilder.pokylinux.org:8010/builders/nightly-release/builds/146/steps/shell_46/logs/stdio/text.
For mpc8315e-rdb, http://autobuilder.pokylinux.org:8010/builders/nightly-release/builds/146/steps/shell_49/logs/stdio/text.

Both those boards are building random kernels .. one is building the omap-pm (which is broken) and the other built linux-dummy.

So something went wrong with the merge of the new kernel, and could be related to the board compatibility .. I'll have a look.

Bruce

Quoted 37 lines
Quoted 28 lines

Cheers,

Bruce

Quoted 20 lines
Quoted 11 lines

Thanks
Sau!
Saul Wold
Yocto Component Wrangler @ Intel
Yocto Project / Poky Build System

_______________________________________________
poky mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/poky

Best Regards,
Jiajun

_______________________________________________
poky mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/poky

Best Regards,
Jiajun

_______________________________________________
poky mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/poky

#5 lore raw
Quoted 45 lines · Bruce Ashfield
Quoted 36 lines · Jiajun
Quoted 36 lines · Jiajun
Quoted 17 lines
Quoted 17 lines

[Resend with correct mailing lists]

Yocto / Poky Folks:

Thanks to everyone's hard work, we are currently on working getting the first build of M2 started and available for QA testing on Monday.

I have pushed out the lastest commit that was pending in the distro/master area to both master and create a builds/milestone branch which is where bug fixes for M2 will go.

There is currently an issue with the PPC Kernel build on this branch and that is being worked, this may impact getting a PPC build available by Monday.

Quoted 8 lines
Quoted 4 lines

For the next week as we stabilize M2, please ensure that any patch or pull requests indicate that this is for M2 or not.  By default all commits will go to master regardless.

Hi Saul,
Nightly build is near finished now. PPC and some non-x86 real hardware

target building failed. I begin downloading them now and will start QA testing.

Is there somewhere I can check a log of the build errors ? We flipped in the
2.6.37 kernel and associated tools, but the any hardware targets should still be building 2.6.34 and be unaffected.

Quoted 7 lines
Quoted 2 lines

If it isn't a kernel that failed to build .. then I'm less help :)

For beagleboard,
http://autobuilder.pokylinux.org:8010/builders/nightly-release/builds/146/steps/shell_46/logs/stdio/text.
For mpc8315e-rdb,
http://autobuilder.pokylinux.org:8010/builders/nightly-release/builds/146/steps/shell_49/logs/stdio/text.

Quoted 5 lines

Both those boards are building random kernels .. one is building the omap-pm (which is broken) and the other built linux-dummy.

So something went wrong with the merge of the new kernel, and could be related to the board compatibility .. I'll have a look.

I made some changes (patch will be out shortly), they fix the emenlow, and I can easily build the fsl and beagleboard out of the box with the changes in place. Looks like a couple of boards were dropped from the stable kernel recipe in all the chaos.

Bruce

Quoted 42 lines

Bruce

Quoted 37 lines
Quoted 28 lines

Cheers,

Bruce

Quoted 20 lines
Quoted 11 lines

Thanks
     Sau!
Saul Wold
Yocto Component Wrangler @ Intel
Yocto Project / Poky Build System

_______________________________________________
poky mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/poky

Best Regards,
Jiajun

_______________________________________________
poky mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/poky

Best Regards,
Jiajun

_______________________________________________
poky mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/poky

Signature · 2 lines
"Thou shalt not follow the NULL pointer, for chaos and madness await
thee at its end"