Skip to contentSkip to conversation

hid: egalax: Extend support for touchscreen used in "Samsung NB30 touch" netbook.

PATCH In review Richard Nauber 2 participants 2 messages Dec 14, 2010 – Dec 15, 2010 HID

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 hid: egalax: Extend support for touchscreen used in "Samsung NB30 touch" netbook.

Hi there,
I got me a brand new "Samsung NB30 touch" and with this patch I have the full multitouch power at my fingertips. At least at two of them...

The patch applies to the
git://git.kernel.org/pub/scm/linux/kernel/git/rydberg/input-mt.git
tree at a528f7.

Have Fun.

BTW: I have not found a suitable tuio bridge for linux mt devices, so I wrote a small mtdev2tuio tool. It uses libmtdev and liblo and allows to interact with lots of existing software (e.g. a compiz plugin, numtyphysics, ...). If someone is interested, I can upload it (might take a while).

-----snip-----

[hid] egalax: Extend hid-egalax support for touchscreen in the "Samsung NB30 touch" netbook.

drivers/hid/hid-core.c +1 -0
index 6fa4503..d8b10f6 100644
@@ -1301,6 +1301,7 @@ static const struct hid_device_id hid_blacklist[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH1) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH2) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH480e) },	
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_BM084) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) },
drivers/hid/hid-egalax.c +2 -0
index 5795969..0beada2 100644
@@ -240,6 +240,8 @@ static const struct hid_device_id egalax_devices[] = {
 			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH1) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
 			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH2) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH480e) },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, egalax_devices);
drivers/hid/hid-ids.h +1 -0
index b76166a..16a6a02 100644
@@ -197,6 +197,7 @@
 #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH	0x480d
 #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH1	0x720c
 #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH2	0x72a1
+#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH480e	0x480e
 
 #define USB_VENDOR_ID_ELECOM		0x056e
 #define USB_DEVICE_ID_ELECOM_BM084	0x0061
#1 lore raw

Hi Richard,

Quoted 3 lines

I got me a brand new "Samsung NB30 touch" and with this patch I have

the full multitouch power at my fingertips. At least at two of them...

Thank you very much for this patch. Will be applied.

Quoted 5 lines

BTW: I have not found a suitable tuio bridge for linux mt devices, so I wrote a small mtdev2tuio tool. It uses libmtdev and liblo and allows to interact with lots of existing software (e.g. a compiz plugin, numtyphysics, ...). If someone is interested, I can upload it (might take a while).

Very nice! If you have a git tree, that would be fantastic.

Thanks,
Henrik