STABLE31 config: Update fence-agents section from fence-agents.git
PATCH 1/1 STABLE31 config: Update fence-agents section from fence-agents.git
Signed-off-by Lon Hohberger <[email protected]>
--- config/tools/xml/cluster.rng.in | 588 ++++++++++++++++++++++++--------------- 1 files changed, 361 insertions(+), 227 deletions(-)
config/tools/xml/cluster.rng.in +361 -227
@@ -2642,7 +2642,8 @@ To validate your cluster.conf against this schema, run: <!-- end non-generated device definitions --> <!-- begin auto-generated device definitions --> - <group rha:fence_agent="fence_vmware"> + <!-- fence_alom --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>
@@ -2662,22 +2663,93 @@ To validate your cluster.conf against this schema, run: <attribute name="passwd_script" rha:description="Script to retrieve password" /> </optional> <optional> - <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> + <attribute name="secure" rha:description="SSH connection" /> </optional> <optional> - <attribute name="exec" rha:description="Command to execute" /> + <attribute name="identity_file" rha:description="Identity file for ssh" /> </optional> <optional> - <attribute name="vmware_type" rha:description="Type of VMware to connect" /> + <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" /> + </optional> + <optional> + <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> + </optional> + <optional> + <attribute name="ipport" rha:description="TCP port to use for connection with device" /> + </optional> + <optional> + <attribute name="verbose" rha:description="Verbose mode" /> + </optional> + <optional> + <attribute name="debug" rha:description="Write debug information to given file" /> + </optional> + <optional> + <attribute name="version" rha:description="Display version information and exit" /> + </optional> + <optional> + <attribute name="help" rha:description="Display help and exit" /> + </optional> + <optional> + <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> + </optional> + <optional> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> + </optional> + <optional> + <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" /> + </optional> + <optional> + <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> + </optional> + <optional> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + </optional> + <optional> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + </optional> + </group> + + + <!-- fence_apc --> + <group> + <optional> + <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> + </optional> + <optional> + <attribute name="action" rha:description="Fencing Action" /> + </optional> + <optional> + <attribute name="ipaddr" rha:description="IP Address or Hostname" /> + </optional> + <optional> + <attribute name="login" rha:description="Login Name" /> + </optional> + <optional> + <attribute name="passwd" rha:description="Login password or passphrase" /> + </optional> + <optional> + <attribute name="passwd_script" rha:description="Script to retrieve password" /> </optional> <optional> <attribute name="secure" rha:description="SSH connection" /> </optional> <optional> + <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> + </optional> + <optional> <attribute name="identity_file" rha:description="Identity file for ssh" /> </optional> <optional> - <attribute name="vmware_datacenter" rha:description="Show only machines in specified datacenter" /> + <attribute name="switch" rha:description="Physical switch number on device" /> + </optional> + <optional> + <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" /> + </optional> + <optional> + <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> + </optional> + <optional> + <attribute name="ipport" rha:description="TCP port to use for connection with device" /> </optional> <optional> <attribute name="verbose" rha:description="Verbose mode" />
@@ -2698,7 +2770,7 @@ To validate your cluster.conf against this schema, run: <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
@@ -2707,15 +2779,16 @@ To validate your cluster.conf against this schema, run: <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> - <group rha:fence_agent="fence_lpar"> + <!-- fence_apc_snmp --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>
@@ -2735,31 +2808,37 @@ To validate your cluster.conf against this schema, run: <attribute name="passwd_script" rha:description="Script to retrieve password" /> </optional> <optional> - <attribute name="secure" rha:description="SSH connection" /> + <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> </optional> <optional> - <attribute name="identity_file" rha:description="Identity file for ssh" /> + <attribute name="snmp_version" rha:description="Specifies SNMP version to use (1,2c,3)" /> </optional> <optional> - <attribute name="partition" rha:description="Partition name" /> + <attribute name="community" rha:description="Set the community string" /> </optional> <optional> - <attribute name="managed" rha:description="Managed system name" /> + <attribute name="snmp_auth_prot" rha:description="Set authentication protocol (MD5|SHA)" /> </optional> <optional> - <attribute name="hmc_version" rha:description="Force HMC version to use (3 or 4)" /> + <attribute name="snmp_sec_level" rha:description="Set security level (noAuthNoPriv|authNoPriv|authPriv)" /> </optional> <optional> - <attribute name="cmd_prompt" rha:description="Force command prompt" /> + <attribute name="snmp_priv_prot" rha:description="Set privacy protocol (DES|AES)" /> </optional> <optional> - <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" /> + <attribute name="snmp_priv_passwd" rha:description="Set privacy protocol password" /> </optional> <optional> - <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> + <attribute name="snmp_priv_passwd_script" rha:description="Script to run to retrieve privacy password" /> </optional> <optional> - <attribute name="ipport" rha:description="TCP port to use for connection with device" /> + <attribute name="udpport" rha:description="UDP/TCP port to use for connection with device" /> + </optional> + <optional> + <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" /> + </optional> + <optional> + <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> </optional> <optional> <attribute name="verbose" rha:description="Verbose mode" />
@@ -2780,7 +2859,7 @@ To validate your cluster.conf against this schema, run: <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
@@ -2789,15 +2868,17 @@ To validate your cluster.conf against this schema, run: <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> + <!-- No metadata for fence_baytech --> - <group rha:fence_agent="fence_bladecenter"> + <!-- fence_bladecenter --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>
@@ -2856,7 +2937,7 @@ To validate your cluster.conf against this schema, run: <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
@@ -2868,15 +2949,18 @@ To validate your cluster.conf against this schema, run: <attribute name="missing_as_off" rha:description="Missing port returns OFF instead of failure" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> + <!-- No metadata for fence_brocade --> + <!-- No metadata for fence_bullpap --> - <group rha:fence_agent="fence_intelmodular"> + <!-- fence_cisco_mds --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>
@@ -2947,7 +3031,7 @@ To validate your cluster.conf against this schema, run: <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
@@ -2956,15 +3040,16 @@ To validate your cluster.conf against this schema, run: <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> - <group rha:fence_agent="fence_ifmib"> + <!-- fence_cisco_ucs --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>
@@ -2984,31 +3069,89 @@ To validate your cluster.conf against this schema, run: <attribute name="passwd_script" rha:description="Script to retrieve password" /> </optional> <optional> + <attribute name="ssl" rha:description="SSL connection" /> + </optional> + <optional> + <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" /> + </optional> + <optional> + <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> + </optional> + <optional> + <attribute name="ipport" rha:description="TCP port to use for connection with device" /> + </optional> + <optional> <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> </optional> <optional> - <attribute name="snmp_version" rha:description="Specifies SNMP version to use (1,2c,3)" /> + <attribute name="verbose" rha:description="Verbose mode" /> </optional> <optional> - <attribute name="community" rha:description="Set the community string" /> + <attribute name="debug" rha:description="Write debug information to given file" /> </optional> <optional> - <attribute name="snmp_auth_prot" rha:description="Set authentication protocol (MD5|SHA)" /> + <attribute name="version" rha:description="Display version information and exit" /> </optional> <optional> - <attribute name="snmp_sec_level" rha:description="Set security level (noAuthNoPriv|authNoPriv|authPriv)" /> + <attribute name="help" rha:description="Display help and exit" /> </optional> <optional> - <attribute name="snmp_priv_prot" rha:description="Set privacy protocol (DES|AES)" /> + <attribute name="separator" rha:description="Separator for CSV created by operation list" /> </optional> <optional> - <attribute name="snmp_priv_passwd" rha:description="Set privacy protocol password" /> + <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="snmp_priv_passwd_script" rha:description="Script to run to retrieve privacy password" /> + <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="udpport" rha:description="UDP/TCP port to use for connection with device" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> + </optional> + <optional> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + </optional> + <optional> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + </optional> + </group> + + <!-- No metadata for fence_cpint --> + <!-- No metadata for fence_drac --> + + <!-- fence_drac5 --> + <group> + <optional> + <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> + </optional> + <optional> + <attribute name="action" rha:description="Fencing Action" /> + </optional> + <optional> + <attribute name="ipaddr" rha:description="IP Address or Hostname" /> + </optional> + <optional> + <attribute name="login" rha:description="Login Name" /> + </optional> + <optional> + <attribute name="passwd" rha:description="Login password or passphrase" /> + </optional> + <optional> + <attribute name="passwd_script" rha:description="Script to retrieve password" /> + </optional> + <optional> + <attribute name="cmd_prompt" rha:description="Force command prompt" /> + </optional> + <optional> + <attribute name="secure" rha:description="SSH connection" /> + </optional> + <optional> + <attribute name="identity_file" rha:description="Identity file for ssh" /> + </optional> + <optional> + <attribute name="drac_version" rha:description="Force DRAC version to use" /> + </optional> + <optional> + <attribute name="module_name" rha:description="DRAC/MC module name" /> </optional> <optional> <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
@@ -3017,6 +3160,9 @@ To validate your cluster.conf against this schema, run: <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> </optional> <optional> + <attribute name="ipport" rha:description="TCP port to use for connection with device" /> + </optional> + <optional> <attribute name="verbose" rha:description="Verbose mode" /> </optional> <optional>
@@ -3035,7 +3181,7 @@ To validate your cluster.conf against this schema, run: <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
@@ -3044,15 +3190,17 @@ To validate your cluster.conf against this schema, run: <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> + <!-- No metadata for fence_egenera --> - <group rha:fence_agent="fence_eps"> + <!-- fence_eps --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>
@@ -3075,6 +3223,9 @@ To validate your cluster.conf against this schema, run: <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> </optional> <optional> + <attribute name="hidden_page" rha:description="Name of hidden page" /> + </optional> + <optional> <attribute name="verbose" rha:description="Verbose mode" /> </optional> <optional>
@@ -3090,15 +3241,16 @@ To validate your cluster.conf against this schema, run: <attribute name="separator" rha:description="Separator for CSV created by operation list" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> - <group rha:fence_agent="fence_ldom"> + <!-- fence_ibmblade --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>
@@ -3118,25 +3270,37 @@ To validate your cluster.conf against this schema, run: <attribute name="passwd_script" rha:description="Script to retrieve password" /> </optional> <optional> - <attribute name="secure" rha:description="SSH connection" /> + <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> </optional> <optional> - <attribute name="identity_file" rha:description="Identity file for ssh" /> + <attribute name="snmp_version" rha:description="Specifies SNMP version to use (1,2c,3)" /> </optional> <optional> - <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> + <attribute name="community" rha:description="Set the community string" /> </optional> <optional> - <attribute name="cmd_prompt" rha:description="Force command prompt" /> + <attribute name="snmp_auth_prot" rha:description="Set authentication protocol (MD5|SHA)" /> </optional> <optional> - <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" /> + <attribute name="snmp_sec_level" rha:description="Set security level (noAuthNoPriv|authNoPriv|authPriv)" /> </optional> <optional> - <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> + <attribute name="snmp_priv_prot" rha:description="Set privacy protocol (DES|AES)" /> </optional> <optional> - <attribute name="ipport" rha:description="TCP port to use for connection with device" /> + <attribute name="snmp_priv_passwd" rha:description="Set privacy protocol password" /> + </optional> + <optional> + <attribute name="snmp_priv_passwd_script" rha:description="Script to run to retrieve privacy password" /> + </optional> + <optional> + <attribute name="udpport" rha:description="UDP/TCP port to use for connection with device" /> + </optional> + <optional> + <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" /> + </optional> + <optional> + <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> </optional> <optional> <attribute name="verbose" rha:description="Verbose mode" />
@@ -3157,7 +3321,7 @@ To validate your cluster.conf against this schema, run: <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
@@ -3166,18 +3330,16 @@ To validate your cluster.conf against this schema, run: <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> - <!-- No metadata for fence_xcat --> - <!-- No metadata for fence_rackswitch --> - <!-- No metadata for fence_rsb --> - <group rha:fence_agent="fence_bladecenter_snmp"> + <!-- fence_ifmib --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>
@@ -3248,7 +3410,7 @@ To validate your cluster.conf against this schema, run: <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
@@ -3257,18 +3419,16 @@ To validate your cluster.conf against this schema, run: <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> - <!-- No metadata for fence_cpint --> - <!-- No metadata for fence_drac --> - <!-- No metadata for fence_ipmilan --> - <group rha:fence_agent="fence_rsa"> + <!-- fence_ilo --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>
@@ -3288,13 +3448,16 @@ To validate your cluster.conf against this schema, run: <attribute name="passwd_script" rha:description="Script to retrieve password" /> </optional> <optional> - <attribute name="cmd_prompt" rha:description="Force command prompt" /> + <attribute name="ssl" rha:description="SSL connection" /> </optional> <optional> - <attribute name="secure" rha:description="SSH connection" /> + <attribute name="ribcl" rha:description="Force ribcl version to use" /> </optional> <optional> - <attribute name="identity_file" rha:description="Identity file for ssh" /> + <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" /> + </optional> + <optional> + <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> </optional> <optional> <attribute name="ipport" rha:description="TCP port to use for connection with device" />
@@ -3315,7 +3478,7 @@ To validate your cluster.conf against this schema, run: <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
@@ -3324,15 +3487,16 @@ To validate your cluster.conf against this schema, run: <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> - <group rha:fence_agent="fence_virsh"> + <!-- fence_ilo_mp --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>
@@ -3358,16 +3522,16 @@ To validate your cluster.conf against this schema, run: <attribute name="identity_file" rha:description="Identity file for ssh" /> </optional> <optional> - <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> + <attribute name="cmd_prompt" rha:description="Force command prompt" /> </optional> <optional> - <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" /> + <attribute name="ipport" rha:description="TCP port to use for connection with device" /> </optional> <optional> - <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> + <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" /> </optional> <optional> - <attribute name="ipport" rha:description="TCP port to use for connection with device" /> + <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> </optional> <optional> <attribute name="verbose" rha:description="Verbose mode" />
@@ -3388,7 +3552,7 @@ To validate your cluster.conf against this schema, run: <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
@@ -3397,17 +3561,16 @@ To validate your cluster.conf against this schema, run: <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> - <!-- No metadata for fence_mcdata --> - <!-- No metadata for fence_bullpap --> - <group rha:fence_agent="fence_wti"> + <!-- fence_intelmodular --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>
@@ -3427,25 +3590,37 @@ To validate your cluster.conf against this schema, run: <attribute name="passwd_script" rha:description="Script to retrieve password" /> </optional> <optional> - <attribute name="cmd_prompt" rha:description="Force command prompt" /> + <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> </optional> <optional> - <attribute name="secure" rha:description="SSH connection" /> + <attribute name="snmp_version" rha:description="Specifies SNMP version to use (1,2c,3)" /> </optional> <optional> - <attribute name="identity_file" rha:description="Identity file for ssh" /> + <attribute name="community" rha:description="Set the community string" /> </optional> <optional> - <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> + <attribute name="snmp_auth_prot" rha:description="Set authentication protocol (MD5|SHA)" /> </optional> <optional> - <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" /> + <attribute name="snmp_sec_level" rha:description="Set security level (noAuthNoPriv|authNoPriv|authPriv)" /> </optional> <optional> - <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> + <attribute name="snmp_priv_prot" rha:description="Set privacy protocol (DES|AES)" /> </optional> <optional> - <attribute name="ipport" rha:description="TCP port to use for connection with device" /> + <attribute name="snmp_priv_passwd" rha:description="Set privacy protocol password" /> + </optional> + <optional> + <attribute name="snmp_priv_passwd_script" rha:description="Script to run to retrieve privacy password" /> + </optional> + <optional> + <attribute name="udpport" rha:description="UDP/TCP port to use for connection with device" /> + </optional> + <optional> + <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" /> + </optional> + <optional> + <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> </optional> <optional> <attribute name="verbose" rha:description="Verbose mode" />
@@ -3466,7 +3641,7 @@ To validate your cluster.conf against this schema, run: <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
@@ -3475,16 +3650,16 @@ To validate your cluster.conf against this schema, run: <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> - <!-- No metadata for fence_zvm --> - <group rha:fence_agent="fence_drac5"> + <!-- fence_ldom --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>
@@ -3504,19 +3679,16 @@ To validate your cluster.conf against this schema, run: <attribute name="passwd_script" rha:description="Script to retrieve password" /> </optional> <optional> - <attribute name="cmd_prompt" rha:description="Force command prompt" /> - </optional> - <optional> <attribute name="secure" rha:description="SSH connection" /> </optional> <optional> <attribute name="identity_file" rha:description="Identity file for ssh" /> </optional> <optional> - <attribute name="drac_version" rha:description="Force DRAC version to use" /> + <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> </optional> <optional> - <attribute name="module_name" rha:description="DRAC/MC module name" /> + <attribute name="cmd_prompt" rha:description="Force command prompt" /> </optional> <optional> <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
@@ -3546,7 +3718,7 @@ To validate your cluster.conf against this schema, run: <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
@@ -3555,43 +3727,16 @@ To validate your cluster.conf against this schema, run: <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> - </optional> - <optional> <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> - </group> - - <!-- No metadata for fence_vixel --> - <!-- No metadata for fence_baytech --> - - <group rha:fence_agent="fence_scsi"> - <optional> - <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> - </optional> - <optional> - <attribute name="aptpl" rha:description="Use APTPL flag for registrations" /> - </optional> - <optional> - <attribute name="devices" rha:description="List of devices to be used for fencing action" /> - </optional> - <optional> - <attribute name="logfile" rha:description="File to write error/debug messages" /> - </optional> - <optional> - <attribute name="key" rha:description="Key value to be used for fencing action" /> - </optional> - <optional> - <attribute name="action" rha:description="Fencing action" /> - </optional> <optional> - <attribute name="nodename" rha:description="Name of node" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> - <!-- No metadata for fence_brocade --> - <group rha:fence_agent="fence_ilo_mp"> + <!-- fence_lpar --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>
@@ -3617,10 +3762,16 @@ To validate your cluster.conf against this schema, run: <attribute name="identity_file" rha:description="Identity file for ssh" /> </optional> <optional> - <attribute name="cmd_prompt" rha:description="Force command prompt" /> + <attribute name="partition" rha:description="Partition name" /> </optional> <optional> - <attribute name="ipport" rha:description="TCP port to use for connection with device" /> + <attribute name="managed" rha:description="Managed system name" /> + </optional> + <optional> + <attribute name="hmc_version" rha:description="Force HMC version to use (3 or 4)" /> + </optional> + <optional> + <attribute name="cmd_prompt" rha:description="Force command prompt" /> </optional> <optional> <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
@@ -3629,6 +3780,9 @@ To validate your cluster.conf against this schema, run: <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> </optional> <optional> + <attribute name="ipport" rha:description="TCP port to use for connection with device" /> + </optional> + <optional> <attribute name="verbose" rha:description="Verbose mode" /> </optional> <optional>
@@ -3647,7 +3801,7 @@ To validate your cluster.conf against this schema, run: <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
@@ -3656,15 +3810,19 @@ To validate your cluster.conf against this schema, run: <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> + <!-- No metadata for fence_ack_manual --> + <!-- No metadata for fence_mcdata --> + <!-- No metadata for fence_rackswitch --> - <group rha:fence_agent="fence_apc"> + <!-- fence_rhevm --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>
@@ -3684,16 +3842,7 @@ To validate your cluster.conf against this schema, run: <attribute name="passwd_script" rha:description="Script to retrieve password" /> </optional> <optional> - <attribute name="secure" rha:description="SSH connection" /> - </optional> - <optional> - <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> - </optional> - <optional> - <attribute name="identity_file" rha:description="Identity file for ssh" /> - </optional> - <optional> - <attribute name="switch" rha:description="Physical switch number on device" /> + <attribute name="ssl" rha:description="SSL connection" /> </optional> <optional> <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
@@ -3705,6 +3854,9 @@ To validate your cluster.conf against this schema, run: <attribute name="ipport" rha:description="TCP port to use for connection with device" /> </optional> <optional> + <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> + </optional> + <optional> <attribute name="verbose" rha:description="Verbose mode" /> </optional> <optional>
@@ -3720,27 +3872,25 @@ To validate your cluster.conf against this schema, run: <attribute name="separator" rha:description="Separator for CSV created by operation list" /> </optional> <optional> - <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> + <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> - <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> - <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> - </optional> </group> - <group rha:fence_agent="fence_alom"> + <!-- fence_rsa --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>
@@ -3760,16 +3910,13 @@ To validate your cluster.conf against this schema, run: <attribute name="passwd_script" rha:description="Script to retrieve password" /> </optional> <optional> - <attribute name="secure" rha:description="SSH connection" /> - </optional> - <optional> - <attribute name="identity_file" rha:description="Identity file for ssh" /> + <attribute name="cmd_prompt" rha:description="Force command prompt" /> </optional> <optional> - <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" /> + <attribute name="secure" rha:description="SSH connection" /> </optional> <optional> - <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> + <attribute name="identity_file" rha:description="Identity file for ssh" /> </optional> <optional> <attribute name="ipport" rha:description="TCP port to use for connection with device" />
@@ -3790,7 +3937,7 @@ To validate your cluster.conf against this schema, run: <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
@@ -3799,16 +3946,17 @@ To validate your cluster.conf against this schema, run: <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> - <!-- No metadata for fence_ibmblade --> + <!-- No metadata for fence_rsb --> - <group rha:fence_agent="fence_sanbox2"> + <!-- fence_sanbox2 --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>
@@ -3855,7 +4003,7 @@ To validate your cluster.conf against this schema, run: <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
@@ -3864,16 +4012,17 @@ To validate your cluster.conf against this schema, run: <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> - <!-- No metadata for fence_egenera --> + <!-- No metadata for fence_scsi --> - <group rha:fence_agent="fence_apc_snmp"> + <!-- fence_virsh --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>
@@ -3893,31 +4042,13 @@ To validate your cluster.conf against this schema, run: <attribute name="passwd_script" rha:description="Script to retrieve password" /> </optional> <optional> - <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> - </optional> - <optional> - <attribute name="snmp_version" rha:description="Specifies SNMP version to use (1,2c,3)" /> - </optional> - <optional> - <attribute name="community" rha:description="Set the community string" /> - </optional> - <optional> - <attribute name="snmp_auth_prot" rha:description="Set authentication protocol (MD5|SHA)" /> - </optional> - <optional> - <attribute name="snmp_sec_level" rha:description="Set security level (noAuthNoPriv|authNoPriv|authPriv)" /> - </optional> - <optional> - <attribute name="snmp_priv_prot" rha:description="Set privacy protocol (DES|AES)" /> - </optional> - <optional> - <attribute name="snmp_priv_passwd" rha:description="Set privacy protocol password" /> + <attribute name="secure" rha:description="SSH connection" /> </optional> <optional> - <attribute name="snmp_priv_passwd_script" rha:description="Script to run to retrieve privacy password" /> + <attribute name="identity_file" rha:description="Identity file for ssh" /> </optional> <optional> - <attribute name="udpport" rha:description="UDP/TCP port to use for connection with device" /> + <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> </optional> <optional> <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
@@ -3926,6 +4057,9 @@ To validate your cluster.conf against this schema, run: <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> </optional> <optional> + <attribute name="ipport" rha:description="TCP port to use for connection with device" /> + </optional> + <optional> <attribute name="verbose" rha:description="Verbose mode" /> </optional> <optional>
@@ -3944,7 +4078,7 @@ To validate your cluster.conf against this schema, run: <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
@@ -3953,15 +4087,17 @@ To validate your cluster.conf against this schema, run: <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> + <!-- No metadata for fence_vixel --> - <group rha:fence_agent="fence_ilo"> + <!-- fence_vmware --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>
@@ -3981,19 +4117,22 @@ To validate your cluster.conf against this schema, run: <attribute name="passwd_script" rha:description="Script to retrieve password" /> </optional> <optional> - <attribute name="ssl" rha:description="SSL connection" /> + <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> </optional> <optional> - <attribute name="ribcl" rha:description="Force ribcl version to use" /> + <attribute name="exec" rha:description="Command to execute" /> </optional> <optional> - <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" /> + <attribute name="vmware_type" rha:description="Type of VMware to connect" /> </optional> <optional> - <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> + <attribute name="secure" rha:description="SSH connection" /> </optional> <optional> - <attribute name="ipport" rha:description="TCP port to use for connection with device" /> + <attribute name="identity_file" rha:description="Identity file for ssh" /> + </optional> + <optional> + <attribute name="vmware_datacenter" rha:description="Show only machines in specified datacenter" /> </optional> <optional> <attribute name="verbose" rha:description="Verbose mode" />
@@ -4008,10 +4147,13 @@ To validate your cluster.conf against this schema, run: <attribute name="help" rha:description="Display help and exit" /> </optional> <optional> + <attribute name="separator" rha:description="Separator for CSV created by operation list" /> + </optional> + <optional> <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
@@ -4020,15 +4162,17 @@ To validate your cluster.conf against this schema, run: <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> + <!-- No metadata for fence_vmware_helper --> - <group rha:fence_agent="fence_cisco_mds"> + <!-- fence_wti --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>
@@ -4048,31 +4192,16 @@ To validate your cluster.conf against this schema, run: <attribute name="passwd_script" rha:description="Script to retrieve password" /> </optional> <optional> - <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> - </optional> - <optional> - <attribute name="snmp_version" rha:description="Specifies SNMP version to use (1,2c,3)" /> - </optional> - <optional> - <attribute name="community" rha:description="Set the community string" /> - </optional> - <optional> - <attribute name="snmp_auth_prot" rha:description="Set authentication protocol (MD5|SHA)" /> - </optional> - <optional> - <attribute name="snmp_sec_level" rha:description="Set security level (noAuthNoPriv|authNoPriv|authPriv)" /> - </optional> - <optional> - <attribute name="snmp_priv_prot" rha:description="Set privacy protocol (DES|AES)" /> + <attribute name="cmd_prompt" rha:description="Force command prompt" /> </optional> <optional> - <attribute name="snmp_priv_passwd" rha:description="Set privacy protocol password" /> + <attribute name="secure" rha:description="SSH connection" /> </optional> <optional> - <attribute name="snmp_priv_passwd_script" rha:description="Script to run to retrieve privacy password" /> + <attribute name="identity_file" rha:description="Identity file for ssh" /> </optional> <optional> - <attribute name="udpport" rha:description="UDP/TCP port to use for connection with device" /> + <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> </optional> <optional> <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
@@ -4081,6 +4210,9 @@ To validate your cluster.conf against this schema, run: <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> </optional> <optional> + <attribute name="ipport" rha:description="TCP port to use for connection with device" /> + </optional> + <optional> <attribute name="verbose" rha:description="Verbose mode" /> </optional> <optional>
@@ -4099,7 +4231,7 @@ To validate your cluster.conf against this schema, run: <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
@@ -4108,13 +4240,15 @@ To validate your cluster.conf against this schema, run: <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> + <!-- No metadata for fence_xcat --> + <!-- No metadata for fence_zvm --> <!-- end auto-generated device definitions --> <group>
Signature · 1 line
1.7.2.3
PATCH 1/1 STABLE31 config: Update fence-agents section from fence-agents.git
Looks OK to me. ACK
Quoted 1,231 lines · Lon Hohberger
Signed-off-by Lon Hohberger <[email protected]>--- config/tools/xml/cluster.rng.in | 588 ++++++++++++++++++++++++--------------- 1 files changed, 361 insertions(+), 227 deletions(-)config/tools/xml/cluster.rng.in +361
-227@@ -2642,7 +2642,8 @@ To validate your cluster.conf against this schema, run: <!-- end non-generated device definitions --> <!-- begin auto-generated device definitions --> - <group rha:fence_agent="fence_vmware"> + <!-- fence_alom --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>@@ -2662,22 +2663,93 @@ To validate your cluster.conf against this schema, run: <attribute name="passwd_script" rha:description="Script to retrieve password" /> </optional> <optional> - <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> + <attribute name="secure" rha:description="SSH connection" /> </optional> <optional> - <attribute name="exec" rha:description="Command to execute" /> + <attribute name="identity_file" rha:description="Identity file for ssh" /> </optional> <optional> - <attribute name="vmware_type" rha:description="Type of VMware to connect" /> + <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" /> + </optional> + <optional> + <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> + </optional> + <optional> + <attribute name="ipport" rha:description="TCP port to use for connection with device" /> + </optional> + <optional> + <attribute name="verbose" rha:description="Verbose mode" /> + </optional> + <optional> + <attribute name="debug" rha:description="Write debug information to given file" /> + </optional> + <optional> + <attribute name="version" rha:description="Display version information and exit" /> + </optional> + <optional> + <attribute name="help" rha:description="Display help and exit" /> + </optional> + <optional> + <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> + </optional> + <optional> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> + </optional> + <optional> + <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" /> + </optional> + <optional> + <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> + </optional> + <optional> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + </optional> + <optional> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + </optional> + </group> + + + <!-- fence_apc --> + <group> + <optional> + <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> + </optional> + <optional> + <attribute name="action" rha:description="Fencing Action" /> + </optional> + <optional> + <attribute name="ipaddr" rha:description="IP Address or Hostname" /> + </optional> + <optional> + <attribute name="login" rha:description="Login Name" /> + </optional> + <optional> + <attribute name="passwd" rha:description="Login password or passphrase" /> + </optional> + <optional> + <attribute name="passwd_script" rha:description="Script to retrieve password" /> </optional> <optional> <attribute name="secure" rha:description="SSH connection" /> </optional> <optional> + <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> + </optional> + <optional> <attribute name="identity_file" rha:description="Identity file for ssh" /> </optional> <optional> - <attribute name="vmware_datacenter" rha:description="Show only machines in specified datacenter" /> + <attribute name="switch" rha:description="Physical switch number on device" /> + </optional> + <optional> + <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" /> + </optional> + <optional> + <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> + </optional> + <optional> + <attribute name="ipport" rha:description="TCP port to use for connection with device" /> </optional> <optional> <attribute name="verbose" rha:description="Verbose mode" />@@ -2698,7 +2770,7 @@ To validate your cluster.conf against this schema, run: <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />@@ -2707,15 +2779,16 @@ To validate your cluster.conf against this schema, run: <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> - <group rha:fence_agent="fence_lpar"> + <!-- fence_apc_snmp --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>@@ -2735,31 +2808,37 @@ To validate your cluster.conf against this schema, run: <attribute name="passwd_script" rha:description="Script to retrieve password" /> </optional> <optional> - <attribute name="secure" rha:description="SSH connection" /> + <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> </optional> <optional> - <attribute name="identity_file" rha:description="Identity file for ssh" /> + <attribute name="snmp_version" rha:description="Specifies SNMP version to use (1,2c,3)" /> </optional> <optional> - <attribute name="partition" rha:description="Partition name" /> + <attribute name="community" rha:description="Set the community string" /> </optional> <optional> - <attribute name="managed" rha:description="Managed system name" /> + <attribute name="snmp_auth_prot" rha:description="Set authentication protocol (MD5|SHA)" /> </optional> <optional> - <attribute name="hmc_version" rha:description="Force HMC version to use (3 or 4)" /> + <attribute name="snmp_sec_level" rha:description="Set security level (noAuthNoPriv|authNoPriv|authPriv)" /> </optional> <optional> - <attribute name="cmd_prompt" rha:description="Force command prompt" /> + <attribute name="snmp_priv_prot" rha:description="Set privacy protocol (DES|AES)" /> </optional> <optional> - <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" /> + <attribute name="snmp_priv_passwd" rha:description="Set privacy protocol password" /> </optional> <optional> - <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> + <attribute name="snmp_priv_passwd_script" rha:description="Script to run to retrieve privacy password" /> </optional> <optional> - <attribute name="ipport" rha:description="TCP port to use for connection with device" /> + <attribute name="udpport" rha:description="UDP/TCP port to use for connection with device" /> + </optional> + <optional> + <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" /> + </optional> + <optional> + <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> </optional> <optional> <attribute name="verbose" rha:description="Verbose mode" />@@ -2780,7 +2859,7 @@ To validate your cluster.conf against this schema, run: <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />@@ -2789,15 +2868,17 @@ To validate your cluster.conf against this schema, run: <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> + <!-- No metadata for fence_baytech --> - <group rha:fence_agent="fence_bladecenter"> + <!-- fence_bladecenter --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>@@ -2856,7 +2937,7 @@ To validate your cluster.conf against this schema, run: <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />@@ -2868,15 +2949,18 @@ To validate your cluster.conf against this schema, run: <attribute name="missing_as_off" rha:description="Missing port returns OFF instead of failure" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> + <!-- No metadata for fence_brocade --> + <!-- No metadata for fence_bullpap --> - <group rha:fence_agent="fence_intelmodular"> + <!-- fence_cisco_mds --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>@@ -2947,7 +3031,7 @@ To validate your cluster.conf against this schema, run: <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />@@ -2956,15 +3040,16 @@ To validate your cluster.conf against this schema, run: <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> - <group rha:fence_agent="fence_ifmib"> + <!-- fence_cisco_ucs --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>@@ -2984,31 +3069,89 @@ To validate your cluster.conf against this schema, run: <attribute name="passwd_script" rha:description="Script to retrieve password" /> </optional> <optional> + <attribute name="ssl" rha:description="SSL connection" /> + </optional> + <optional> + <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" /> + </optional> + <optional> + <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> + </optional> + <optional> + <attribute name="ipport" rha:description="TCP port to use for connection with device" /> + </optional> + <optional> <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> </optional> <optional> - <attribute name="snmp_version" rha:description="Specifies SNMP version to use (1,2c,3)" /> + <attribute name="verbose" rha:description="Verbose mode" /> </optional> <optional> - <attribute name="community" rha:description="Set the community string" /> + <attribute name="debug" rha:description="Write debug information to given file" /> </optional> <optional> - <attribute name="snmp_auth_prot" rha:description="Set authentication protocol (MD5|SHA)" /> + <attribute name="version" rha:description="Display version information and exit" /> </optional> <optional> - <attribute name="snmp_sec_level" rha:description="Set security level (noAuthNoPriv|authNoPriv|authPriv)" /> + <attribute name="help" rha:description="Display help and exit" /> </optional> <optional> - <attribute name="snmp_priv_prot" rha:description="Set privacy protocol (DES|AES)" /> + <attribute name="separator" rha:description="Separator for CSV created by operation list" /> </optional> <optional> - <attribute name="snmp_priv_passwd" rha:description="Set privacy protocol password" /> + <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="snmp_priv_passwd_script" rha:description="Script to run to retrieve privacy password" /> + <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="udpport" rha:description="UDP/TCP port to use for connection with device" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> + </optional> + <optional> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + </optional> + <optional> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + </optional> + </group> + + <!-- No metadata for fence_cpint --> + <!-- No metadata for fence_drac --> + + <!-- fence_drac5 --> + <group> + <optional> + <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> + </optional> + <optional> + <attribute name="action" rha:description="Fencing Action" /> + </optional> + <optional> + <attribute name="ipaddr" rha:description="IP Address or Hostname" /> + </optional> + <optional> + <attribute name="login" rha:description="Login Name" /> + </optional> + <optional> + <attribute name="passwd" rha:description="Login password or passphrase" /> + </optional> + <optional> + <attribute name="passwd_script" rha:description="Script to retrieve password" /> + </optional> + <optional> + <attribute name="cmd_prompt" rha:description="Force command prompt" /> + </optional> + <optional> + <attribute name="secure" rha:description="SSH connection" /> + </optional> + <optional> + <attribute name="identity_file" rha:description="Identity file for ssh" /> + </optional> + <optional> + <attribute name="drac_version" rha:description="Force DRAC version to use" /> + </optional> + <optional> + <attribute name="module_name" rha:description="DRAC/MC module name" /> </optional> <optional> <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />@@ -3017,6 +3160,9 @@ To validate your cluster.conf against this schema, run: <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> </optional> <optional> + <attribute name="ipport" rha:description="TCP port to use for connection with device" /> + </optional> + <optional> <attribute name="verbose" rha:description="Verbose mode" /> </optional> <optional>@@ -3035,7 +3181,7 @@ To validate your cluster.conf against this schema, run: <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />@@ -3044,15 +3190,17 @@ To validate your cluster.conf against this schema, run: <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> + <!-- No metadata for fence_egenera --> - <group rha:fence_agent="fence_eps"> + <!-- fence_eps --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>@@ -3075,6 +3223,9 @@ To validate your cluster.conf against this schema, run: <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> </optional> <optional> + <attribute name="hidden_page" rha:description="Name of hidden page" /> + </optional> + <optional> <attribute name="verbose" rha:description="Verbose mode" /> </optional> <optional>@@ -3090,15 +3241,16 @@ To validate your cluster.conf against this schema, run: <attribute name="separator" rha:description="Separator for CSV created by operation list" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> - <group rha:fence_agent="fence_ldom"> + <!-- fence_ibmblade --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>@@ -3118,25 +3270,37 @@ To validate your cluster.conf against this schema, run: <attribute name="passwd_script" rha:description="Script to retrieve password" /> </optional> <optional> - <attribute name="secure" rha:description="SSH connection" /> + <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> </optional> <optional> - <attribute name="identity_file" rha:description="Identity file for ssh" /> + <attribute name="snmp_version" rha:description="Specifies SNMP version to use (1,2c,3)" /> </optional> <optional> - <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> + <attribute name="community" rha:description="Set the community string" /> </optional> <optional> - <attribute name="cmd_prompt" rha:description="Force command prompt" /> + <attribute name="snmp_auth_prot" rha:description="Set authentication protocol (MD5|SHA)" /> </optional> <optional> - <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" /> + <attribute name="snmp_sec_level" rha:description="Set security level (noAuthNoPriv|authNoPriv|authPriv)" /> </optional> <optional> - <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> + <attribute name="snmp_priv_prot" rha:description="Set privacy protocol (DES|AES)" /> </optional> <optional> - <attribute name="ipport" rha:description="TCP port to use for connection with device" /> + <attribute name="snmp_priv_passwd" rha:description="Set privacy protocol password" /> + </optional> + <optional> + <attribute name="snmp_priv_passwd_script" rha:description="Script to run to retrieve privacy password" /> + </optional> + <optional> + <attribute name="udpport" rha:description="UDP/TCP port to use for connection with device" /> + </optional> + <optional> + <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" /> + </optional> + <optional> + <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> </optional> <optional> <attribute name="verbose" rha:description="Verbose mode" />@@ -3157,7 +3321,7 @@ To validate your cluster.conf against this schema, run: <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />@@ -3166,18 +3330,16 @@ To validate your cluster.conf against this schema, run: <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> - <!-- No metadata for fence_xcat --> - <!-- No metadata for fence_rackswitch --> - <!-- No metadata for fence_rsb --> - <group rha:fence_agent="fence_bladecenter_snmp"> + <!-- fence_ifmib --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>@@ -3248,7 +3410,7 @@ To validate your cluster.conf against this schema, run: <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />@@ -3257,18 +3419,16 @@ To validate your cluster.conf against this schema, run: <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> - <!-- No metadata for fence_cpint --> - <!-- No metadata for fence_drac --> - <!-- No metadata for fence_ipmilan --> - <group rha:fence_agent="fence_rsa"> + <!-- fence_ilo --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>@@ -3288,13 +3448,16 @@ To validate your cluster.conf against this schema, run: <attribute name="passwd_script" rha:description="Script to retrieve password" /> </optional> <optional> - <attribute name="cmd_prompt" rha:description="Force command prompt" /> + <attribute name="ssl" rha:description="SSL connection" /> </optional> <optional> - <attribute name="secure" rha:description="SSH connection" /> + <attribute name="ribcl" rha:description="Force ribcl version to use" /> </optional> <optional> - <attribute name="identity_file" rha:description="Identity file for ssh" /> + <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" /> + </optional> + <optional> + <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> </optional> <optional> <attribute name="ipport" rha:description="TCP port to use for connection with device" />@@ -3315,7 +3478,7 @@ To validate your cluster.conf against this schema, run: <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />@@ -3324,15 +3487,16 @@ To validate your cluster.conf against this schema, run: <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> - <group rha:fence_agent="fence_virsh"> + <!-- fence_ilo_mp --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>@@ -3358,16 +3522,16 @@ To validate your cluster.conf against this schema, run: <attribute name="identity_file" rha:description="Identity file for ssh" /> </optional> <optional> - <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> + <attribute name="cmd_prompt" rha:description="Force command prompt" /> </optional> <optional> - <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" /> + <attribute name="ipport" rha:description="TCP port to use for connection with device" /> </optional> <optional> - <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> + <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" /> </optional> <optional> - <attribute name="ipport" rha:description="TCP port to use for connection with device" /> + <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> </optional> <optional> <attribute name="verbose" rha:description="Verbose mode" />@@ -3388,7 +3552,7 @@ To validate your cluster.conf against this schema, run: <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />@@ -3397,17 +3561,16 @@ To validate your cluster.conf against this schema, run: <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> - <!-- No metadata for fence_mcdata --> - <!-- No metadata for fence_bullpap --> - <group rha:fence_agent="fence_wti"> + <!-- fence_intelmodular --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>@@ -3427,25 +3590,37 @@ To validate your cluster.conf against this schema, run: <attribute name="passwd_script" rha:description="Script to retrieve password" /> </optional> <optional> - <attribute name="cmd_prompt" rha:description="Force command prompt" /> + <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> </optional> <optional> - <attribute name="secure" rha:description="SSH connection" /> + <attribute name="snmp_version" rha:description="Specifies SNMP version to use (1,2c,3)" /> </optional> <optional> - <attribute name="identity_file" rha:description="Identity file for ssh" /> + <attribute name="community" rha:description="Set the community string" /> </optional> <optional> - <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> + <attribute name="snmp_auth_prot" rha:description="Set authentication protocol (MD5|SHA)" /> </optional> <optional> - <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" /> + <attribute name="snmp_sec_level" rha:description="Set security level (noAuthNoPriv|authNoPriv|authPriv)" /> </optional> <optional> - <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> + <attribute name="snmp_priv_prot" rha:description="Set privacy protocol (DES|AES)" /> </optional> <optional> - <attribute name="ipport" rha:description="TCP port to use for connection with device" /> + <attribute name="snmp_priv_passwd" rha:description="Set privacy protocol password" /> + </optional> + <optional> + <attribute name="snmp_priv_passwd_script" rha:description="Script to run to retrieve privacy password" /> + </optional> + <optional> + <attribute name="udpport" rha:description="UDP/TCP port to use for connection with device" /> + </optional> + <optional> + <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" /> + </optional> + <optional> + <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> </optional> <optional> <attribute name="verbose" rha:description="Verbose mode" />@@ -3466,7 +3641,7 @@ To validate your cluster.conf against this schema, run: <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />@@ -3475,16 +3650,16 @@ To validate your cluster.conf against this schema, run: <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> - <!-- No metadata for fence_zvm --> - <group rha:fence_agent="fence_drac5"> + <!-- fence_ldom --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>@@ -3504,19 +3679,16 @@ To validate your cluster.conf against this schema, run: <attribute name="passwd_script" rha:description="Script to retrieve password" /> </optional> <optional> - <attribute name="cmd_prompt" rha:description="Force command prompt" /> - </optional> - <optional> <attribute name="secure" rha:description="SSH connection" /> </optional> <optional> <attribute name="identity_file" rha:description="Identity file for ssh" /> </optional> <optional> - <attribute name="drac_version" rha:description="Force DRAC version to use" /> + <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> </optional> <optional> - <attribute name="module_name" rha:description="DRAC/MC module name" /> + <attribute name="cmd_prompt" rha:description="Force command prompt" /> </optional> <optional> <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />@@ -3546,7 +3718,7 @@ To validate your cluster.conf against this schema, run: <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />@@ -3555,43 +3727,16 @@ To validate your cluster.conf against this schema, run: <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> - </optional> - <optional> <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> - </group> - - <!-- No metadata for fence_vixel --> - <!-- No metadata for fence_baytech --> - - <group rha:fence_agent="fence_scsi"> - <optional> - <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> - </optional> - <optional> - <attribute name="aptpl" rha:description="Use APTPL flag for registrations" /> - </optional> - <optional> - <attribute name="devices" rha:description="List of devices to be used for fencing action" /> - </optional> - <optional> - <attribute name="logfile" rha:description="File to write error/debug messages" /> - </optional> - <optional> - <attribute name="key" rha:description="Key value to be used for fencing action" /> - </optional> - <optional> - <attribute name="action" rha:description="Fencing action" /> - </optional> <optional> - <attribute name="nodename" rha:description="Name of node" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> - <!-- No metadata for fence_brocade --> - <group rha:fence_agent="fence_ilo_mp"> + <!-- fence_lpar --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>@@ -3617,10 +3762,16 @@ To validate your cluster.conf against this schema, run: <attribute name="identity_file" rha:description="Identity file for ssh" /> </optional> <optional> - <attribute name="cmd_prompt" rha:description="Force command prompt" /> + <attribute name="partition" rha:description="Partition name" /> </optional> <optional> - <attribute name="ipport" rha:description="TCP port to use for connection with device" /> + <attribute name="managed" rha:description="Managed system name" /> + </optional> + <optional> + <attribute name="hmc_version" rha:description="Force HMC version to use (3 or 4)" /> + </optional> + <optional> + <attribute name="cmd_prompt" rha:description="Force command prompt" /> </optional> <optional> <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />@@ -3629,6 +3780,9 @@ To validate your cluster.conf against this schema, run: <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> </optional> <optional> + <attribute name="ipport" rha:description="TCP port to use for connection with device" /> + </optional> + <optional> <attribute name="verbose" rha:description="Verbose mode" /> </optional> <optional>@@ -3647,7 +3801,7 @@ To validate your cluster.conf against this schema, run: <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />@@ -3656,15 +3810,19 @@ To validate your cluster.conf against this schema, run: <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> + <!-- No metadata for fence_ack_manual --> + <!-- No metadata for fence_mcdata --> + <!-- No metadata for fence_rackswitch --> - <group rha:fence_agent="fence_apc"> + <!-- fence_rhevm --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>@@ -3684,16 +3842,7 @@ To validate your cluster.conf against this schema, run: <attribute name="passwd_script" rha:description="Script to retrieve password" /> </optional> <optional> - <attribute name="secure" rha:description="SSH connection" /> - </optional> - <optional> - <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> - </optional> - <optional> - <attribute name="identity_file" rha:description="Identity file for ssh" /> - </optional> - <optional> - <attribute name="switch" rha:description="Physical switch number on device" /> + <attribute name="ssl" rha:description="SSL connection" /> </optional> <optional> <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />@@ -3705,6 +3854,9 @@ To validate your cluster.conf against this schema, run: <attribute name="ipport" rha:description="TCP port to use for connection with device" /> </optional> <optional> + <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> + </optional> + <optional> <attribute name="verbose" rha:description="Verbose mode" /> </optional> <optional>@@ -3720,27 +3872,25 @@ To validate your cluster.conf against this schema, run: <attribute name="separator" rha:description="Separator for CSV created by operation list" /> </optional> <optional> - <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> + <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> - <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> - <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> - </optional> </group> - <group rha:fence_agent="fence_alom"> + <!-- fence_rsa --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>@@ -3760,16 +3910,13 @@ To validate your cluster.conf against this schema, run: <attribute name="passwd_script" rha:description="Script to retrieve password" /> </optional> <optional> - <attribute name="secure" rha:description="SSH connection" /> - </optional> - <optional> - <attribute name="identity_file" rha:description="Identity file for ssh" /> + <attribute name="cmd_prompt" rha:description="Force command prompt" /> </optional> <optional> - <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" /> + <attribute name="secure" rha:description="SSH connection" /> </optional> <optional> - <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> + <attribute name="identity_file" rha:description="Identity file for ssh" /> </optional> <optional> <attribute name="ipport" rha:description="TCP port to use for connection with device" />@@ -3790,7 +3937,7 @@ To validate your cluster.conf against this schema, run: <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />@@ -3799,16 +3946,17 @@ To validate your cluster.conf against this schema, run: <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> - <!-- No metadata for fence_ibmblade --> + <!-- No metadata for fence_rsb --> - <group rha:fence_agent="fence_sanbox2"> + <!-- fence_sanbox2 --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>@@ -3855,7 +4003,7 @@ To validate your cluster.conf against this schema, run: <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />@@ -3864,16 +4012,17 @@ To validate your cluster.conf against this schema, run: <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> - <!-- No metadata for fence_egenera --> + <!-- No metadata for fence_scsi --> - <group rha:fence_agent="fence_apc_snmp"> + <!-- fence_virsh --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>@@ -3893,31 +4042,13 @@ To validate your cluster.conf against this schema, run: <attribute name="passwd_script" rha:description="Script to retrieve password" /> </optional> <optional> - <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> - </optional> - <optional> - <attribute name="snmp_version" rha:description="Specifies SNMP version to use (1,2c,3)" /> - </optional> - <optional> - <attribute name="community" rha:description="Set the community string" /> - </optional> - <optional> - <attribute name="snmp_auth_prot" rha:description="Set authentication protocol (MD5|SHA)" /> - </optional> - <optional> - <attribute name="snmp_sec_level" rha:description="Set security level (noAuthNoPriv|authNoPriv|authPriv)" /> - </optional> - <optional> - <attribute name="snmp_priv_prot" rha:description="Set privacy protocol (DES|AES)" /> - </optional> - <optional> - <attribute name="snmp_priv_passwd" rha:description="Set privacy protocol password" /> + <attribute name="secure" rha:description="SSH connection" /> </optional> <optional> - <attribute name="snmp_priv_passwd_script" rha:description="Script to run to retrieve privacy password" /> + <attribute name="identity_file" rha:description="Identity file for ssh" /> </optional> <optional> - <attribute name="udpport" rha:description="UDP/TCP port to use for connection with device" /> + <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> </optional> <optional> <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />@@ -3926,6 +4057,9 @@ To validate your cluster.conf against this schema, run: <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> </optional> <optional> + <attribute name="ipport" rha:description="TCP port to use for connection with device" /> + </optional> + <optional> <attribute name="verbose" rha:description="Verbose mode" /> </optional> <optional>@@ -3944,7 +4078,7 @@ To validate your cluster.conf against this schema, run: <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />@@ -3953,15 +4087,17 @@ To validate your cluster.conf against this schema, run: <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> + <!-- No metadata for fence_vixel --> - <group rha:fence_agent="fence_ilo"> + <!-- fence_vmware --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>@@ -3981,19 +4117,22 @@ To validate your cluster.conf against this schema, run: <attribute name="passwd_script" rha:description="Script to retrieve password" /> </optional> <optional> - <attribute name="ssl" rha:description="SSL connection" /> + <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> </optional> <optional> - <attribute name="ribcl" rha:description="Force ribcl version to use" /> + <attribute name="exec" rha:description="Command to execute" /> </optional> <optional> - <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" /> + <attribute name="vmware_type" rha:description="Type of VMware to connect" /> </optional> <optional> - <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> + <attribute name="secure" rha:description="SSH connection" /> </optional> <optional> - <attribute name="ipport" rha:description="TCP port to use for connection with device" /> + <attribute name="identity_file" rha:description="Identity file for ssh" /> + </optional> + <optional> + <attribute name="vmware_datacenter" rha:description="Show only machines in specified datacenter" /> </optional> <optional> <attribute name="verbose" rha:description="Verbose mode" />@@ -4008,10 +4147,13 @@ To validate your cluster.conf against this schema, run: <attribute name="help" rha:description="Display help and exit" /> </optional> <optional> + <attribute name="separator" rha:description="Separator for CSV created by operation list" /> + </optional> + <optional> <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />@@ -4020,15 +4162,17 @@ To validate your cluster.conf against this schema, run: <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> + <!-- No metadata for fence_vmware_helper --> - <group rha:fence_agent="fence_cisco_mds"> + <!-- fence_wti --> + <group> <optional> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" --> </optional>@@ -4048,31 +4192,16 @@ To validate your cluster.conf against this schema, run: <attribute name="passwd_script" rha:description="Script to retrieve password" /> </optional> <optional> - <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> - </optional> - <optional> - <attribute name="snmp_version" rha:description="Specifies SNMP version to use (1,2c,3)" /> - </optional> - <optional> - <attribute name="community" rha:description="Set the community string" /> - </optional> - <optional> - <attribute name="snmp_auth_prot" rha:description="Set authentication protocol (MD5|SHA)" /> - </optional> - <optional> - <attribute name="snmp_sec_level" rha:description="Set security level (noAuthNoPriv|authNoPriv|authPriv)" /> - </optional> - <optional> - <attribute name="snmp_priv_prot" rha:description="Set privacy protocol (DES|AES)" /> + <attribute name="cmd_prompt" rha:description="Force command prompt" /> </optional> <optional> - <attribute name="snmp_priv_passwd" rha:description="Set privacy protocol password" /> + <attribute name="secure" rha:description="SSH connection" /> </optional> <optional> - <attribute name="snmp_priv_passwd_script" rha:description="Script to run to retrieve privacy password" /> + <attribute name="identity_file" rha:description="Identity file for ssh" /> </optional> <optional> - <attribute name="udpport" rha:description="UDP/TCP port to use for connection with device" /> + <attribute name="port" rha:description="Physical plug number or name of virtual machine" /> </optional> <optional> <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />@@ -4081,6 +4210,9 @@ To validate your cluster.conf against this schema, run: <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" /> </optional> <optional> + <attribute name="ipport" rha:description="TCP port to use for connection with device" /> + </optional> + <optional> <attribute name="verbose" rha:description="Verbose mode" /> </optional> <optional>@@ -4099,7 +4231,7 @@ To validate your cluster.conf against this schema, run: <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" /> </optional> <optional> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" /> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" /> </optional> <optional> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />@@ -4108,13 +4240,15 @@ To validate your cluster.conf against this schema, run: <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" /> </optional> <optional> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> </optional> <optional> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" /> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" /> </optional> </group> + <!-- No metadata for fence_xcat --> + <!-- No metadata for fence_zvm --> <!-- end auto-generated device definitions --> <group>