Skip to contentSkip to conversation

microblaze: ll_temac driver: mask of length for newer h/w versions

PATCH New John Linn 2 participants 2 messages Dec 21, 2010

Subsystems (2)
lore
Share & tools
lore

John Linn

author
#0 lore raw

PATCH 1/1 microblaze: ll_temac driver: mask of length for newer h/w versions

The LL TEMAC h/w changed at some point quite some time ago such that the length field in the BD is used for other stuff also such that the length needs to be masked correctly. This change is backward compatible with older h/w also.

This change was tested on the 12.2 EDK system on the SP605 board.

---
 drivers/net/xilinx_ll_temac.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/net/xilinx_ll_temac.c +1 -1
index d73e22e..c31b943 100644
@@ -344,7 +344,7 @@ static int xps_ll_temac_recv_sdma(struct eth_device *dev)
 		return 0;
 	}
 
-	length = rx_bd.app5;
+	length = rx_bd.app5 & 0x3FFF;
 	flush_cache ((u32)rx_bd.phys_buf_p, length);
 
 	rx_bd.buf_len = ETHER_MTU;
Signature · 5 lines
1.6.2.1



This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
#1 lore raw

PATCH 1/1 microblaze: ll_temac driver: mask of length for newer h/w versions

Hi John,

Quoted 11 lines · John Linn

The LL TEMAC h/w changed at some point quite some time ago such that the length field in the BD is used for other stuff also such that the length needs to be masked correctly. This change is backward compatible with older h/w also.

This change was tested on the 12.2 EDK system on the SP605 board.

---
 drivers/net/xilinx_ll_temac.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

This patch is in my custodian u-boot tree.
We have discussed the ll_temac driver some weeks ago and there are some things which needs to be done before this driver will be possible to merge to the mainline. The main thing is phy lib and complete driver review.

Thanks,
Michal

Signature · 4 lines
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/
Microblaze U-BOOT custodian