davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs
Subsystems (3)
PATCH 1/1 davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs
The JTAG variant code for Rev-2.0 silicon of the OMAP-L138 has changed. In addition, the variant code for the AM-1808 SoC appears to match the Rev-2.0 code for the OMAP-L138. Add an additional entry to support these chips.
---
This is against davinci-linux tree.
Changes since v0, removed whitespace fixups not related to patch.
arch/arm/mach-davinci/da850.c | 7 +++++++ 1 files changed, 7 insertions(+), 0 deletions(-)
arch/arm/mach-davinci/da850.c +7 -0
@@ -764,6 +764,13 @@ static struct davinci_id da850_ids[] = { .cpu_id = DAVINCI_CPU_ID_DA850, .name = "da850/omap-l138", }, + { + .variant = 0x1, + .part_no = 0xb7d1, + .manufacturer = 0x017, /* 0x02f >> 1 */ + .cpu_id = DAVINCI_CPU_ID_DA850, + .name = "da850/omap-l138/am18xx", + }, };static struct davinci_timer_instance da850_timer_instance[4 ] = {
Signature · 1 line
1.7.0.4
PATCH 1/1 davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs
Quoted 4 lines · Michael Williamson
The JTAG variant code for Rev-2.0 silicon of the OMAP-L138 has changed. In addition, the variant code for the AM-1808 SoC appears to match the Rev-2.0 code for the OMAP-L138. Add an additional entry to support these chips.
Tested on?
I'm assuming on the Mity platforms, right?
Kevin
Quoted 26 lines
Signed-off-by Michael Williamson <[email protected]>---
This is against davinci-linux tree.
Changes since v0, removed whitespace fixups not related to patch.arch/arm/mach-davinci/da850.c | 7 +++++++ 1 files changed, 7 insertions(+), 0 deletions(-)arch/arm/mach-davinci/da850.c +7
-0@@ -764,6 +764,13 @@ static struct davinci_id da850_ids[] = { .cpu_id = DAVINCI_CPU_ID_DA850, .name = "da850/omap-l138", }, + { + .variant = 0x1, + .part_no = 0xb7d1, + .manufacturer = 0x017, /* 0x02f >> 1 */ + .cpu_id = DAVINCI_CPU_ID_DA850, + .name = "da850/omap-l138/am18xx", + }, };static struct davinci_timer_instance da850_timer_instance[4 ] = {
PATCH 1/1 davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs
Quoted 11 lines · Kevin Hilman
Quoted 4 lines · Michael Williamson
The JTAG variant code for Rev-2.0 silicon of the OMAP-L138 has changed. In addition, the variant code for the AM-1808 SoC appears to match the Rev-2.0 code for the OMAP-L138. Add an additional entry to support these chips.
Tested on?
I'm assuming on the Mity platforms, right?
I tested this using an AM-1808 (456 MHz speedgrade) on a MityARM-1808 configured SoM. I don't have a rev-2.0 silicon OMAP-L138 to try, but according to the Rev B datasheet the variant will change as described. It doesn't break the Rev 1 OMAP-L138 silicon MityDSP-L138F SoM.
There was a thread about this in this list (link below) and I also have some background on an e2e link at TI (link below).
I had forgotten that I pulled this patch from Sudhakar Rajashekhara on the arago omapl PSP kernel (link to patch below). It's really his work.
I can resubmit (with tested-by and correct authorship) unless someone at TI is prepping the same patch? I sent it because the AM-1808 fails to boot without it. Thanks.
-Mike
davinci thread:
http://linux.davincidsp.com/pipermail/davinci-linux-open-source/2010-November/021224.html
e2e thread:
http://e2e.ti.com/support/embedded/f/354/p/67290/248486.aspx
arago kernel patch:
http://arago-project.org/git/projects/?p=linux-omapl1.git;a=commit;h=6157618435e313a444cdf059702bd34036a6e2b7
Quoted 28 lines
Kevin
Quoted 26 lines
Signed-off-by Michael Williamson <[email protected]>---
This is against davinci-linux tree.
Changes since v0, removed whitespace fixups not related to patch.arch/arm/mach-davinci/da850.c | 7 +++++++ 1 files changed, 7 insertions(+), 0 deletions(-)arch/arm/mach-davinci/da850.c +7
-0@@ -764,6 +764,13 @@ static struct davinci_id da850_ids[] = { .cpu_id = DAVINCI_CPU_ID_DA850, .name = "da850/omap-l138", }, + { + .variant = 0x1, + .part_no = 0xb7d1, + .manufacturer = 0x017, /* 0x02f >> 1 */ + .cpu_id = DAVINCI_CPU_ID_DA850, + .name = "da850/omap-l138/am18xx", + }, };static struct davinci_timer_instance da850_timer_instance[4 ] = {
PATCH 1/1 davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs
Quoted 18 lines · Michael Williamson
Quoted 11 lines · Kevin Hilman
Quoted 4 lines · Michael Williamson
The JTAG variant code for Rev-2.0 silicon of the OMAP-L138 has changed. In addition, the variant code for the AM-1808 SoC appears to match the Rev-2.0 code for the OMAP-L138. Add an additional entry to support these chips.
Tested on?
I'm assuming on the Mity platforms, right?
I tested this using an AM-1808 (456 MHz speedgrade) on a MityARM-1808 configured SoM. I don't have a rev-2.0 silicon OMAP-L138 to try, but according to the Rev B datasheet the variant will change as described. It doesn't break the Rev 1 OMAP-L138 silicon MityDSP-L138F SoM.
Quoted 7 lines
There was a thread about this in this list (link below) and I also have some background on an e2e link at TI (link below).
I had forgotten that I pulled this patch from Sudhakar Rajashekhara on the arago omapl PSP kernel (link to patch below). It's really his work.
I can resubmit (with tested-by and correct authorship)
Yes please. Also add the links to the threads mentioned above.
Thanks,
Kevin
Quoted 3 lines
unless someone at TI
is prepping the same patch? I sent it because the AM-1808 fails to boot without it. Thanks.
Y
Quoted 39 lines
-Mike
davinci thread:
http://linux.davincidsp.com/pipermail/davinci-linux-open-source/2010-November/021224.htmle2e thread:
http://e2e.ti.com/support/embedded/f/354/p/67290/248486.aspxarago kernel patch:
http://arago-project.org/git/projects/?p=linux-omapl1.git;a=commit;h=6157618435e313a444cdf059702bd34036a6e2b7Quoted 28 lines
Kevin
Quoted 26 lines
Signed-off-by Michael Williamson <[email protected]>---
This is against davinci-linux tree.
Changes since v0, removed whitespace fixups not related to patch.arch/arm/mach-davinci/da850.c | 7 +++++++ 1 files changed, 7 insertions(+), 0 deletions(-)arch/arm/mach-davinci/da850.c +7
-0@@ -764,6 +764,13 @@ static struct davinci_id da850_ids[] = { .cpu_id = DAVINCI_CPU_ID_DA850, .name = "da850/omap-l138", }, + { + .variant = 0x1, + .part_no = 0xb7d1, + .manufacturer = 0x017, /* 0x02f >> 1 */ + .cpu_id = DAVINCI_CPU_ID_DA850, + .name = "da850/omap-l138/am18xx", + }, };static struct davinci_timer_instance da850_timer_instance[4 ] = {
PATCH 1/1 davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs
Hi Mike,
Quoted 23 lines · Kevin Hilman
Quoted 21 lines · Michael Williamson
Quoted 11 lines · Kevin Hilman
Quoted 4 lines · Michael Williamson
The JTAG variant code for Rev-2.0 silicon of the OMAP-L138 has changed. In addition, the variant code for the AM-1808 SoC appears to match the Rev-2.0 code for the OMAP-L138. Add an additional entry to support these chips.
Tested on?
I'm assuming on the Mity platforms, right?
I tested this using an AM-1808 (456 MHz speedgrade) on a MityARM-1808 configured SoM. I don't have a rev-2.0 silicon OMAP-L138 to try, but according to the Rev B datasheet the variant will change as described. It doesn't break the Rev 1 OMAP-L138 silicon MityDSP-L138F SoM.
There was a thread about this in this list (link below) and I also have some background on an e2e link at TI (link below).
Quoted 7 lines
Quoted 4 lines
I had forgotten that I pulled this patch from Sudhakar Rajashekhara on the arago omapl PSP kernel (link to patch below). It's really his work.
I can resubmit (with tested-by and correct authorship)
Yes please. Also add the links to the threads mentioned above.
Also, please add
Thanks,
Sudhakar