davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs From: Sudhakar Rajashekhara <[email protected]>
Subsystems (3)
PATCH v5 1/1 davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs From: Sudhakar Rajashekhara <[email protected]>
The JTAG variant code for Rev-2.0 silicon of the OMAP-L138 has changed. In addition, the variant code for the AM-1808 SoC appears to match the Rev-2.0 code for the OMAP-L138. Add an additional entry to support these chips.
This patch is originally from a patch on the arago project, here:
http://arago-project.org/git/projects/?p=linux-omapl1.git;a=commit;h=6157618435e313a444cdf059702bd34036a6e2b7
Further information related to the need for this patch can be located at
http://e2e.ti.com/support/embedded/f/354/p/67290/248486.aspx
http://linux.davincidsp.com/pipermail/davinci-linux-open-source/2010-November/021224.html
This patch was tested using an AM-1808 SoC on a MityARM-1808 SoM card. It was also tested using a Rev 1.0 silicon OMAP-L138 on a MityDSP-L138F card.
---
Built against linux-davinci tree.
Changes since v4.
- removed am18x code from 0 variant per Sekhar's request.
arch/arm/mach-davinci/da850.c | 7 +++++++ 1 files changed, 7 insertions(+), 0 deletions(-)
arch/arm/mach-davinci/da850.c +7 -0
@@ -764,6 +764,13 @@ static struct davinci_id da850_ids[] = { .cpu_id = DAVINCI_CPU_ID_DA850, .name = "da850/omap-l138", }, + { + .variant = 0x1, + .part_no = 0xb7d1, + .manufacturer = 0x017, /* 0x02f >> 1 */ + .cpu_id = DAVINCI_CPU_ID_DA850, + .name = "da850/omap-l138/am18x", + }, };static struct davinci_timer_instance da850_timer_instance[4 ] = {
Signature · 1 line
1.7.0.4
PATCH v5 1/1 davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs From: Sudhakar Rajashekhara <[email protected]>
Michael Williamson <[email protected]> writes:
I'm assuming the 'From:' line currently in the subject was supposed to go here?
Kevin
Quoted 47 lines
The JTAG variant code for Rev-2.0 silicon of the OMAP-L138 has changed. In addition, the variant code for the AM-1808 SoC appears to match the Rev-2.0 code for the OMAP-L138. Add an additional entry to support these chips.
This patch is originally from a patch on the arago project, here:
http://arago-project.org/git/projects/?p=linux-omapl1.git;a=commit;h=6157618435e313a444cdf059702bd34036a6e2b7Further information related to the need for this patch can be located at
http://e2e.ti.com/support/embedded/f/354/p/67290/248486.aspx
http://linux.davincidsp.com/pipermail/davinci-linux-open-source/2010-November/021224.htmlThis patch was tested using an AM-1808 SoC on a MityARM-1808 SoM card. It was also tested using a Rev 1.0 silicon OMAP-L138 on a MityDSP-L138F card.
Signed-off-by Sudhakar Rajashekhara <[email protected]>Signed-off-by Michael Williamson <[email protected]>Tested-by Michael Williamson <[email protected]>Reported-by Nicolas Luna <[email protected]>---
Built against linux-davinci tree.Changes since v4.
- removed am18x code from 0 variant per Sekhar's request.
arch/arm/mach-davinci/da850.c | 7 +++++++ 1 files changed, 7 insertions(+), 0 deletions(-)arch/arm/mach-davinci/da850.c +7
-0@@ -764,6 +764,13 @@ static struct davinci_id da850_ids[] = { .cpu_id = DAVINCI_CPU_ID_DA850, .name = "da850/omap-l138", }, + { + .variant = 0x1, + .part_no = 0xb7d1, + .manufacturer = 0x017, /* 0x02f >> 1 */ + .cpu_id = DAVINCI_CPU_ID_DA850, + .name = "da850/omap-l138/am18x", + }, };static struct davinci_timer_instance da850_timer_instance[4 ] = {
PATCH v5 1/1 davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs From: Sudhakar Rajashekhara <[email protected]>
Quoted 6 lines · Kevin Hilman
Michael Williamson <[email protected]> writes:
I'm assuming the 'From:' line currently in the subject was supposed to go here?
Kevin
Arg. Yes. Sorry about that; not sure how I lost the newline. Do you need me to resend?
-Mike
Quoted 48 lines
Quoted 48 lines
The JTAG variant code for Rev-2.0 silicon of the OMAP-L138 has changed. In addition, the variant code for the AM-1808 SoC appears to match the Rev-2.0 code for the OMAP-L138. Add an additional entry to support these chips.
This patch is originally from a patch on the arago project, here:
http://arago-project.org/git/projects/?p=linux-omapl1.git;a=commit;h=6157618435e313a444cdf059702bd34036a6e2b7Further information related to the need for this patch can be located at
http://e2e.ti.com/support/embedded/f/354/p/67290/248486.aspx
http://linux.davincidsp.com/pipermail/davinci-linux-open-source/2010-November/021224.htmlThis patch was tested using an AM-1808 SoC on a MityARM-1808 SoM card. It was also tested using a Rev 1.0 silicon OMAP-L138 on a MityDSP-L138F card.
Signed-off-by Sudhakar Rajashekhara <[email protected]>Signed-off-by Michael Williamson <[email protected]>Tested-by Michael Williamson <[email protected]>Reported-by Nicolas Luna <[email protected]>---
Built against linux-davinci tree.Changes since v4.
- removed am18x code from 0 variant per Sekhar's request.
arch/arm/mach-davinci/da850.c | 7 +++++++ 1 files changed, 7 insertions(+), 0 deletions(-)arch/arm/mach-davinci/da850.c +7
-0@@ -764,6 +764,13 @@ static struct davinci_id da850_ids[] = { .cpu_id = DAVINCI_CPU_ID_DA850, .name = "da850/omap-l138", }, + { + .variant = 0x1, + .part_no = 0xb7d1, + .manufacturer = 0x017, /* 0x02f >> 1 */ + .cpu_id = DAVINCI_CPU_ID_DA850, + .name = "da850/omap-l138/am18x", + }, };static struct davinci_timer_instance da850_timer_instance[4 ] = {
PATCH v5 1/1 davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs From: Sudhakar Rajashekhara <[email protected]>
Quoted 10 lines · Michael Williamson
Quoted 6 lines · Kevin Hilman
Michael Williamson <[email protected]> writes:
I'm assuming the 'From:' line currently in the subject was supposed to go here?
Kevin
Arg. Yes. Sorry about that; not sure how I lost the newline. Do you need me to resend?
No biggie, I can take care of it. Just wanted to let you know something got messed up on the sending side.
Kevin
Quoted 48 lines
Quoted 48 lines
Quoted 48 lines
The JTAG variant code for Rev-2.0 silicon of the OMAP-L138 has changed. In addition, the variant code for the AM-1808 SoC appears to match the Rev-2.0 code for the OMAP-L138. Add an additional entry to support these chips.
This patch is originally from a patch on the arago project, here:
http://arago-project.org/git/projects/?p=linux-omapl1.git;a=commit;h=6157618435e313a444cdf059702bd34036a6e2b7Further information related to the need for this patch can be located at
http://e2e.ti.com/support/embedded/f/354/p/67290/248486.aspx
http://linux.davincidsp.com/pipermail/davinci-linux-open-source/2010-November/021224.htmlThis patch was tested using an AM-1808 SoC on a MityARM-1808 SoM card. It was also tested using a Rev 1.0 silicon OMAP-L138 on a MityDSP-L138F card.
Signed-off-by Sudhakar Rajashekhara <[email protected]>Signed-off-by Michael Williamson <[email protected]>Tested-by Michael Williamson <[email protected]>Reported-by Nicolas Luna <[email protected]>---
Built against linux-davinci tree.Changes since v4.
- removed am18x code from 0 variant per Sekhar's request.
arch/arm/mach-davinci/da850.c | 7 +++++++ 1 files changed, 7 insertions(+), 0 deletions(-)arch/arm/mach-davinci/da850.c +7
-0@@ -764,6 +764,13 @@ static struct davinci_id da850_ids[] = { .cpu_id = DAVINCI_CPU_ID_DA850, .name = "da850/omap-l138", }, + { + .variant = 0x1, + .part_no = 0xb7d1, + .manufacturer = 0x017, /* 0x02f >> 1 */ + .cpu_id = DAVINCI_CPU_ID_DA850, + .name = "da850/omap-l138/am18x", + }, };static struct davinci_timer_instance da850_timer_instance[4 ] = {
PATCH v5 1/1 davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs From: Sudhakar Rajashekhara <[email protected]>
In reply to Michael WilliamsonQuoted 12 lines · Michael Williamson
The JTAG variant code for Rev-2.0 silicon of the OMAP-L138 has changed. In addition, the variant code for the AM-1808 SoC appears to match the Rev-2.0 code for the OMAP-L138. Add an additional entry to support these chips.
This patch is originally from a patch on the arago project, here:
http://arago-project.org/git/projects/?p=linux-omapl1.git;a=commit;h=6157618435e313a444cdf059702bd34036a6e2b7Further information related to the need for this patch can be located at
http://e2e.ti.com/support/embedded/f/354/p/67290/248486.aspx
http://linux.davincidsp.com/pipermail/davinci-linux-open-source/2010-November/021224.html
Quoted 7 lines
This patch was tested using an AM-1808 SoC on a MityARM-1808 SoM card. It was also tested using a Rev 1.0 silicon OMAP-L138 on a MityDSP-L138F card.
Signed-off-by Sudhakar Rajashekhara <[email protected]>Signed-off-by Michael Williamson <[email protected]>Tested-by Michael Williamson <[email protected]>Reported-by Nicolas Luna <[email protected]>
Thanks, queueing this for 2.6.39.
Also added a reviewed-by tag for Sekhar.
Kevin
Quoted 28 lines
---
Built against linux-davinci tree.Changes since v4.
- removed am18x code from 0 variant per Sekhar's request.
arch/arm/mach-davinci/da850.c | 7 +++++++ 1 files changed, 7 insertions(+), 0 deletions(-)arch/arm/mach-davinci/da850.c +7
-0@@ -764,6 +764,13 @@ static struct davinci_id da850_ids[] = { .cpu_id = DAVINCI_CPU_ID_DA850, .name = "da850/omap-l138", }, + { + .variant = 0x1, + .part_no = 0xb7d1, + .manufacturer = 0x017, /* 0x02f >> 1 */ + .cpu_id = DAVINCI_CPU_ID_DA850, + .name = "da850/omap-l138/am18x", + }, };static struct davinci_timer_instance da850_timer_instance[4 ] = {