ppc, 8xx: remove obsolete mgsuvd board

deleted file mode 100644
index e4fc53a..0000000
@@ -1,163 +0,0 @@
-/*
- * MGSUVD Device Tree Source
- *
- * Copyright 2008 DENX Software Engineering GmbH
- * Heiko Schocher <[email protected]>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-/ {
-	model = "MGSUVD";
-	compatible = "keymile,mgsuvd";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,852@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <16>;
-			i-cache-line-size = <16>;
-			d-cache-size = <8192>;
-			i-cache-size = <8192>;
-			timebase-frequency = <0>;	/* Filled in by u-boot */
-			bus-frequency = <0>;		/* Filled in by u-boot */
-			clock-frequency = <0>;		/* Filled in by u-boot */
-			interrupts = <15 2>;		/* decrementer interrupt */
-			interrupt-parent = <&PIC>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <00000000 0x4000000>;  /* Filled in by u-boot */
-	};
-
-	localbus@fff00100 {
-		compatible = "fsl,mpc852-localbus", "fsl,pq1-localbus", "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		reg = <0xfff00100 0x40>;
-
-		ranges = <0 0 0xf0000000 0x01000000>;  /* Filled in by u-boot */
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x1000000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			bank-width = <1>;
-			device-width = <1>;
-			partition@0 {
-				label = "u-boot";
-				reg = <0 0x80000>;
-			};
-			partition@80000 {
-				label = "env";
-				reg = <0x80000 0x20000>;
-			};
-			partition@a0000 {
-				label = "kernel";
-				reg = <0xa0000 0x1e0000>;
-			};
-			partition@280000 {
-				label = "dtb";
-				reg = <0x280000 0x20000>;
-			};
-			partition@2a0000 {
-			        label = "root";
-			        reg = <0x2a0000 0x500000>;
-			};
-			partition@7a0000 {
-			        label = "user";
-			        reg = <0x7a0000 0x860000>;
-			};
-		};
-	};
-
-	soc@fff00000 {
-		compatible = "fsl,mpc852", "fsl,pq1-soc", "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		ranges = <0 0xfff00000 0x00004000>;
-
-		PIC: interrupt-controller@0 {
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0 24>;
-			compatible = "fsl,mpc852-pic", "fsl,pq1-pic";
-		};
-
-		cpm@9c0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc852-cpm", "fsl,cpm1", "simple-bus";
-			interrupts = <0>;	/* cpm error interrupt */
-			interrupt-parent = <&CPM_PIC>;
-			reg = <0x9c0 10>;
-			ranges;
-
-			muram@2000 {
-				compatible = "fsl,cpm-muram";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x2000 0x2000>;
-
-				data@0 {
-					compatible = "fsl,cpm-muram-data";
-					reg = <0x800 0x1800>;
-				};
-			};
-
-			brg@9f0 {
-				compatible = "fsl,mpc852-brg",
-				             "fsl,cpm1-brg",
-				             "fsl,cpm-brg";
-				reg = <0x9f0 0x10>;
-				clock-frequency = <0>; /* Filled in by u-boot */
-			};
-
-			CPM_PIC: interrupt-controller@930 {
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				interrupts = <5 2 0 2>;
-				interrupt-parent = <&PIC>;
-				reg = <0x930 0x20>;
-				compatible = "fsl,cpm1-pic";
-			};
-
-			/* MON-1 */
-			serial@a80 {
-				device_type = "serial";
-				compatible = "fsl,cpm1-smc-uart";
-				reg = <0xa80 0x10 0x3fc0 0x40>;
-				interrupts = <4>;
-				interrupt-parent = <&CPM_PIC>;
-				fsl,cpm-brg = <1>;
-				fsl,cpm-command = <0x0090>;
-				current-speed = <0>; /* Filled in by u-boot */
-			};
-
-			ethernet@a40 {
-				device_type = "network";
-				compatible  = "fsl,mpc866-scc-enet",
-				              "fsl,cpm1-scc-enet";
-				reg = <0xa40 0x18 0x3e00 0x100>;
-				local-mac-address = [ 00 00 00 00 00 00 ];  /* Filled in by u-boot */
-				interrupts = <28>;
-				interrupt-parent = <&CPM_PIC>;
-				fsl,cpm-command = <0x80>;
-				fixed-link = <0 0 10 0 0>;
-			};
-		};
-	};
-};

81 lines not on this page · raw message

index dd35ce0..ee56a9e 100644
@@ -49,12 +49,6 @@ config PPC_ADDER875
 	  This enables support for the Analogue & Micro Adder 875
 	  board.
 
-config PPC_MGSUVD
-	bool "MGSUVD"
-	select CPM1
-	help
-	  This enables support for the Keymile MGSUVD board.
-
 config TQM8XX
 	bool "TQM8XX"
 	select CPM1

@@ -6,5 +6,4 @@ obj-$(CONFIG_MPC885ADS)   += mpc885ads_setup.o
 obj-$(CONFIG_MPC86XADS)   += mpc86xads_setup.o
 obj-$(CONFIG_PPC_EP88XC)  += ep88xc.o
 obj-$(CONFIG_PPC_ADDER875) += adder875.o
-obj-$(CONFIG_PPC_MGSUVD) += mgsuvd.o
 obj-$(CONFIG_TQM8XX)      += tqm8xx_setup.o