Does linux wireless support TL-WN861N
2011/1/18 JD <[email protected]>:
Quoted 3 lines
TP-Link TL-WN861N
see
http://www.tp-link.com/products/productDetails.asp?class=&content=spe&pmodel=TL-WN861N
https://forum.openwrt.org/viewtopic.php?id=25431
http://www.wikidevi.com/wiki/TP-LINK_TL-WN861N_v2
Both sources tell about AR9223 chipset, but I is not mentioned on
http://wireless.kernel.org/en/users/Drivers/ath9k
Maybe someone from ath9k ML knows it? Or try to Google it.
Signature · 1 line
Rafa?
Quoted 4 lines · Rafa? Mi?ecki
2011/1/18 JD<[email protected]>:
Quoted 3 lines
TP-Link TL-WN861N
see
http://www.tp-link.com/products/productDetails.asp?class=&content=spe&pmodel=TL-WN861N
Quoted 8 lines
https://forum.openwrt.org/viewtopic.php?id=25431
http://www.wikidevi.com/wiki/TP-LINK_TL-WN861N_v2Both sources tell about AR9223 chipset, but I is not mentioned on
http://wireless.kernel.org/en/users/Drivers/ath9kMaybe someone from ath9k ML knows it? Or try to Google it.
Thanx Rafal.
I did find it listed on
http://wireless.kernel.org/en/users/Drivers/ath9k/products/external?highlight=%28TL-WN861N%29
However, I also found out that it has very very poor Rx sensitivity (only -68 dBm) at 11g,
and much much less at 11N. My location relative to AP is very bad. I need a card supported
by ath9k and with Rx sensitivity that can go all the way to -97dBm.
Cheers,
JD
2011/1/18 JD <[email protected]>:
Quoted 28 lines · Rafa? Mi?ecki
Quoted 8 lines
2011/1/18 JD<[email protected]>:
Quoted 5 lines
TP-Link TL-WN861N
seehttp://www.tp-link.com/products/productDetails.asp?class=&content=spe&pmodel=TL-WN861N
Quoted 8 lines
https://forum.openwrt.org/viewtopic.php?id=25431
http://www.wikidevi.com/wiki/TP-LINK_TL-WN861N_v2Both sources tell about AR9223 chipset, but I is not mentioned on
http://wireless.kernel.org/en/users/Drivers/ath9kMaybe someone from ath9k ML knows it? Or try to Google it.
Thanx Rafal.
I did find it listed onhttp://wireless.kernel.org/en/users/Drivers/ath9k/products/external?highlight=%28TL-WN861N%29
However, I also found out that it has very very poor Rx sensitivity (only -68 dBm) at 11g,
and much much less at 11N. My location relative to AP is very bad. I need a card supported
by ath9k and with Rx sensitivity that can go all the way to -97dBm.
Quoted 3 lines
Cheers,
JD
That sensitivity number is the sensitivity at the 54Mbps bitrate. If you're comparing product briefs or datasheets, make sure you're comparing numbers for the same bitrate. That card can receive 1Mbps down to -90dBm, and 6Mbps down to -88dBm. You'll find cards with sensitivity 6 or 7dB better, but that's about it.
-Brian