Skip to contentSkip to conversation

WARNING: at kernel/printk.c:430 do_syslog+0x40d/0x441()

DISCUSSION Justin P. Mattock 3 participants 10 messages Jan 19, 2011 – Jan 24, 2011 SELinux security module

lore
Share & tools
lore
#0 lore raw

this is showing up with the latest kernel in enforcing mode.. (I have not update the policy and/or selinux userspace)

[   12.803882] type=1400 audit(1295457694.801:3): avc:  denied  { syslog 
} for  pid=1540 comm="rsyslogd" capability=34 
scontext=system_u:system_r:init_t:s0 
tcontext=system_u:system_r:init_t:s0 tclass=capability2
[   12.803888] ------------[ cut here ]------------
[   12.803894] WARNING: at kernel/printk.c:430 do_syslog+0x40d/0x441()
[   12.803896] Hardware name: iMac9,1
[   12.803898] Attempt to access syslog with CAP_SYS_ADMIN but no 
CAP_SYSLOG (deprecated and denied).
[   12.803900] Modules linked in: twofish_generic twofish_x86_64 

twofish_common ctr ah4 esp4 authenc uhci_hcd hci_uart rfcomm lib80211_crypt_tkip nf_nat_irc hidp nf_conntrack_irc wl(P) nf_nat_ftp l2cap nf_nat nf_conntrack_ipv4 coretemp nf_defrag_ipv4 acpi_cpufreq mperf appletouch nf_conntrack_ftp nf_conntrack iptable_filter button uvcvideo processor btusb ip_tables videodev evdev bluetooth x_tables applesmc i2c_nforce2 firewire_ohci firewire_core forcedeth ohci_hcd ehci_hcd

[   12.803943] Pid: 1540, comm: rsyslogd Tainted: P            2.6.38-rc1 #5
[   12.803946] Call Trace:
[   12.803950]  [<ffffffff81060c64>] ? warn_slowpath_common+0x80/0x98
[   12.803954]  [<ffffffff81060d10>] ? warn_slowpath_fmt+0x41/0x43
[   12.803958]  [<ffffffff81062088>] ? do_syslog+0x40d/0x441
[   12.803963]  [<ffffffff811fcc1f>] ? do_raw_spin_lock+0x6b/0x118
[   12.803968]  [<ffffffff81143ca7>] ? kmsg_open+0x17/0x19
[   12.803972]  [<ffffffff8113b01f>] ? proc_reg_open+0xac/0x149
[   12.803975]  [<ffffffff81143c90>] ? kmsg_open+0x0/0x19
[   12.803979]  [<ffffffff81143c78>] ? kmsg_release+0x0/0x18
[   12.803982]  [<ffffffff8113af73>] ? proc_reg_open+0x0/0x149
[   12.803987]  [<ffffffff810f7b2f>] ? __dentry_open+0x15d/0x282
[   12.803991]  [<ffffffff810f7d25>] ? nameidata_to_filp+0x50/0x57
[   12.803995]  [<ffffffff8110336b>] ? finish_open+0x9c/0x1a3
[   12.803999]  [<ffffffff81104964>] ? do_path_lookup+0x66/0x109
[   12.804015]  [<ffffffff81105816>] ? do_filp_open+0x1b6/0x6a4
[   12.804019]  [<ffffffff810f42a8>] ? check_object+0x13b/0x1e8
[   12.804023]  [<ffffffff811fcbab>] ? do_raw_spin_unlock+0x8f/0x98
[   12.804027]  [<ffffffff8110f481>] ? alloc_fd+0x111/0x123
[   12.804031]  [<ffffffff810f7903>] ? do_sys_open+0x5b/0xed
[   12.804035]  [<ffffffff810f79be>] ? sys_open+0x1b/0x1d
[   12.804039]  [<ffffffff8102d092>] ? system_call_fastpath+0x16/0x1b
[   12.804042] ---[ end trace 03d1aa6aedda8529 ]---

when using audit2allow I get:

allow init_t self:capability2 syslog;

which gives an error when trying to install the module, due to the policy not knowing what capability2 is

system is ubuntu maverick, if this is already in(refpolicy) then I'll pull the latest when I get a chance..

Justin P. Mattock

#1 lore raw
Quoted 7 lines · Justin P. Mattock

this is showing up with the latest kernel in enforcing mode.. (I have not update the policy and/or selinux userspace)

[   12.803882] type=1400 audit(1295457694.801:3): avc:  denied  { syslog 

} for pid=1540 comm="rsyslogd" capability=34 scontext=system_u:system_r:init_t:s0 tcontext=system_u:system_r:init_t:s0 tclass=capability2

[cut]

Quoted 9 lines

when using audit2allow I get:

allow init_t self:capability2 syslog;

which gives an error when trying to install the module, due to the policy not knowing what capability2 is

system is ubuntu maverick, if this is already in(refpolicy) then I'll pull the latest when I get a chance..

Support for this capability is upstream in refpolicy.

Signature · 3 lines
Chris PeBenito
Tresys Technology, LLC
www.tresys.com | oss.tresys.com
#2 lore raw
Quoted 13 lines · Christopher J. PeBenito
Quoted 7 lines · Justin P. Mattock

this is showing up with the latest kernel in enforcing mode.. (I have not update the policy and/or selinux userspace)

[   12.803882] type=1400 audit(1295457694.801:3): avc:  denied  { syslog

} for pid=1540 comm="rsyslogd" capability=34 scontext=system_u:system_r:init_t:s0 tcontext=system_u:system_r:init_t:s0 tclass=capability2

[cut]

Quoted 4 lines

when using audit2allow I get:

allow init_t self:capability2 syslog;

Quoted 8 lines
Quoted 5 lines

which gives an error when trying to install the module, due to the policy not knowing what capability2 is

system is ubuntu maverick, if this is already in(refpolicy) then I'll pull the latest when I get a chance..

Support for this capability is upstream in refpolicy.

all right... then I shall pull the latest, and load her up!!

Thanks..

Justin P. Mattock

#3 lore raw
Quoted 14 lines · Justin P. Mattock
Quoted 13 lines · Christopher J. PeBenito
Quoted 7 lines · Justin P. Mattock

this is showing up with the latest kernel in enforcing mode.. (I have not update the policy and/or selinux userspace)

[ 12.803882] type=1400 audit(1295457694.801:3): avc: denied { syslog

} for pid=1540 comm="rsyslogd" capability=34 scontext=system_u:system_r:init_t:s0 tcontext=system_u:system_r:init_t:s0 tclass=capability2

[cut]

Quoted 4 lines

when using audit2allow I get:

allow init_t self:capability2 syslog;

Quoted 9 lines
Quoted 8 lines
Quoted 5 lines

which gives an error when trying to install the module, due to the policy not knowing what capability2 is

system is ubuntu maverick, if this is already in(refpolicy) then I'll pull the latest when I get a chance..

Support for this capability is upstream in refpolicy.

well... after building and trying to install, seems I need to do this:

From dae5d4d75ab5db99fde09a67f9a1df240f85fbdd Mon Sep 17 00:00:00 2001
From: Justin P. Mattock <[email protected]>
Date: Mon, 24 Jan 2011 11:13:31 -0800
Subject: [PATCH] modified: policy/modules/kernel/domain.te

(quoted diff) +0 -0

b/policy/modules/kernel/domain.te
index bc534c1..77c363b 100644

policy/modules/kernel/domain.te +1 -1
@@ -24,7 +24,8 @@ attribute unconfined_domain_type;
 
  # Domains that can mmap low memory.
  attribute mmap_low_domain_type;
-neverallow { domain -mmap_low_domain_type } self:memprotect mmap_zero;
+#neverallow { domain -mmap_low_domain_type } self:memprotect mmap_zero;
 
  # Domains that can set their current context
  # (perform dynamic transitions)
Signature · 7 lines
1.6.5.GIT


in order for the policy to build all the way... is anybody else hitting 
this, or is this just me..

Justin P. Mattock
#4 lore raw
Quoted 42 lines · Justin P. Mattock
Quoted 14 lines · Justin P. Mattock
Quoted 13 lines · Christopher J. PeBenito
Quoted 7 lines · Justin P. Mattock

this is showing up with the latest kernel in enforcing mode.. (I have not update the policy and/or selinux userspace)

[ 12.803882] type=1400 audit(1295457694.801:3): avc: denied { syslog

} for pid=1540 comm="rsyslogd" capability=34 scontext=system_u:system_r:init_t:s0 tcontext=system_u:system_r:init_t:s0 tclass=capability2

[cut]

Quoted 4 lines

when using audit2allow I get:

allow init_t self:capability2 syslog;

Quoted 9 lines
Quoted 8 lines
Quoted 5 lines

which gives an error when trying to install the module, due to the policy not knowing what capability2 is

system is ubuntu maverick, if this is already in(refpolicy) then I'll pull the latest when I get a chance..

Support for this capability is upstream in refpolicy.

well... after building and trying to install, seems I need to do this:

From dae5d4d75ab5db99fde09a67f9a1df240f85fbdd Mon Sep 17 00:00:00 2001
From: Justin P. Mattock <[email protected]>
Date: Mon, 24 Jan 2011 11:13:31 -0800
Subject: [PATCH] modified: policy/modules/kernel/domain.te

policy/modules/kernel/domain.te +0 -0
index bc534c1..77c363b 100644

policy/modules/kernel/domain.te attribute unconfined_domain_type; · line 30

Quoted 8 lines
policy/modules/kernel/domain.te +1 -1
@@ -24,7 +24,8 @@ attribute unconfined_domain_type;
 
 # Domains that can mmap low memory.
 attribute mmap_low_domain_type;
-neverallow { domain -mmap_low_domain_type } self:memprotect mmap_zero;
+#neverallow { domain -mmap_low_domain_type } self:memprotect mmap_zero;
 
 # Domains that can set their current context
 # (perform dynamic transitions)

Oops.. forgot to post the error:

pp -i /usr/share/selinux/mcs/xprint.pp -i /usr/share/selinux/mcs/xscreensaver.pp -i /usr/share/selinux/mcs/xserver.pp -i /usr/share/selinux/mcs/yam.pp -i /usr/share/selinux/mcs/zabbix.pp -i /usr/share/selinux/mcs/zebra.pp -i /usr/share/selinux/mcs/zosremote.pp libsepol.check_assertion_helper: neverallow violated by allow apmd_t apmd_t:memprotect { mmap_zero }; libsemanage.semanage_expand_sandbox: Expand module failed /usr/sbin/semodule: Failed!
make: *** [load] Error 1

Justin P. Mattock

#5 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 22 lines · Justin P. Mattock
Quoted 21 lines · Justin P. Mattock
Quoted 20 lines · Justin P. Mattock
Quoted 19 lines · Christopher J. PeBenito
Quoted 7 lines · Justin P. Mattock

this is showing up with the latest kernel in enforcing mode.. (I have not update the policy and/or selinux userspace)

[ 12.803882] type=1400 audit(1295457694.801:3): avc: denied { syslog

} for pid=1540 comm="rsyslogd" capability=34 scontext=system_u:system_r:init_t:s0 tcontext=system_u:system_r:init_t:s0 tclass=capability2

[cut]

Quoted 9 lines

when using audit2allow I get:

allow init_t self:capability2 syslog;

which gives an error when trying to install the module, due to the policy not knowing what capability2 is

system is ubuntu maverick, if this is already in(refpolicy) then I'll pull the latest when I get a chance..

Quoted 7 lines
Quoted 7 lines
Quoted 3 lines
Quoted 2 lines

Support for this capability is upstream in refpolicy.

well... after building and trying to install, seems I need to do this:

instead add this to policy/modules/services/apm.te:

domain_mmap_low(apmd_t)

and set boolean: mmap_low_allowed to on to allow apmd_t to mmap low if needed

note though that toggling this boolean also allow wine and "whatsitsname" to mmap low.

Quoted 37 lines
Quoted 14 lines

From dae5d4d75ab5db99fde09a67f9a1df240f85fbdd Mon Sep 17 00:00:00 2001
From: Justin P. Mattock <[email protected]>
Date: Mon, 24 Jan 2011 11:13:31 -0800
Subject: [PATCH] modified: policy/modules/kernel/domain.te

policy/modules/kernel/domain.te +0 -0
index bc534c1..77c363b 100644

policy/modules/kernel/domain.te attribute unconfined_domain_type; · line 30

Quoted 8 lines
policy/modules/kernel/domain.te +1 -1
@@ -24,7 +24,8 @@ attribute unconfined_domain_type;
 
 # Domains that can mmap low memory.
 attribute mmap_low_domain_type;
-neverallow { domain -mmap_low_domain_type } self:memprotect mmap_zero;
+#neverallow { domain -mmap_low_domain_type } self:memprotect mmap_zero;
 
 # Domains that can set their current context
 # (perform dynamic transitions)

Oops.. forgot to post the error:

pp -i /usr/share/selinux/mcs/xprint.pp -i /usr/share/selinux/mcs/xscreensaver.pp -i /usr/share/selinux/mcs/xserver.pp -i /usr/share/selinux/mcs/yam.pp -i /usr/share/selinux/mcs/zabbix.pp -i /usr/share/selinux/mcs/zebra.pp -i /usr/share/selinux/mcs/zosremote.pp libsepol.check_assertion_helper: neverallow violated by allow apmd_t apmd_t:memprotect { mmap_zero }; libsemanage.semanage_expand_sandbox: Expand module failed /usr/sbin/semodule: Failed!
make: *** [load] Error 1

Quoted 5 lines

Justin P. Mattock
_______________________________________________
refpolicy mailing list
refpolicy at oss.tresys.com
http://oss.tresys.com/mailman/listinfo/refpolicy

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.16 (GNU/Linux)
Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org/

iEYEARECAAYFAk094K4ACgkQMlxVo39jgT9FUwCfXmy2cKoTO5Zvte5nzPExQ1Nr LOYAoLcsMPdSEktlPzEKG8FeF3M7LCG4
=cQ5o
-----END PGP SIGNATURE-----

#6 lore raw
Quoted 31 lines · Dominick Grift

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 27 lines · Justin P. Mattock
Quoted 26 lines · Justin P. Mattock
Quoted 23 lines · Justin P. Mattock
Quoted 21 lines · Christopher J. PeBenito
Quoted 7 lines · Justin P. Mattock

this is showing up with the latest kernel in enforcing mode.. (I have not update the policy and/or selinux userspace)

[ 12.803882] type=1400 audit(1295457694.801:3): avc: denied { syslog

} for pid=1540 comm="rsyslogd" capability=34 scontext=system_u:system_r:init_t:s0 tcontext=system_u:system_r:init_t:s0 tclass=capability2

[cut]

Quoted 9 lines

when using audit2allow I get:

allow init_t self:capability2 syslog;

which gives an error when trying to install the module, due to the policy not knowing what capability2 is

system is ubuntu maverick, if this is already in(refpolicy) then I'll pull the latest when I get a chance..

Support for this capability is upstream in refpolicy.

Quoted 7 lines
Quoted 2 lines
Quoted 2 lines

well... after building and trying to install, seems I need to do this:

instead add this to policy/modules/services/apm.te:

domain_mmap_low(apmd_t)

just added this, and now I can build all the way through...

Quoted 6 lines

and set boolean: mmap_low_allowed to on to allow apmd_t to mmap low if needed

note though that toggling this boolean also allow wine and "whatsitsname" to mmap low.

not sure.. this was hitting on a fresh build of the policy no modules or avc's being added yet(stock policy)

Quoted 47 lines
Quoted 37 lines
Quoted 14 lines
   From dae5d4d75ab5db99fde09a67f9a1df240f85fbdd Mon Sep 17 00:00:00 2001

From: Justin P. Mattock<[email protected]>
Date: Mon, 24 Jan 2011 11:13:31 -0800
Subject: [PATCH] modified: policy/modules/kernel/domain.te

policy/modules/kernel/domain.te +0 -0
index bc534c1..77c363b 100644

policy/modules/kernel/domain.te attribute unconfined_domain_type; · line 30

Quoted 8 lines
policy/modules/kernel/domain.te +1 -1
@@ -24,7 +24,8 @@ attribute unconfined_domain_type;
 
 # Domains that can mmap low memory.
 attribute mmap_low_domain_type;
-neverallow { domain -mmap_low_domain_type } self:memprotect mmap_zero;
+#neverallow { domain -mmap_low_domain_type } self:memprotect mmap_zero;
 
 # Domains that can set their current context
 # (perform dynamic transitions)

Oops.. forgot to post the error:

pp -i /usr/share/selinux/mcs/xprint.pp -i /usr/share/selinux/mcs/xscreensaver.pp -i /usr/share/selinux/mcs/xserver.pp -i /usr/share/selinux/mcs/yam.pp -i /usr/share/selinux/mcs/zabbix.pp -i /usr/share/selinux/mcs/zebra.pp -i /usr/share/selinux/mcs/zosremote.pp libsepol.check_assertion_helper: neverallow violated by allow apmd_t apmd_t:memprotect { mmap_zero }; libsemanage.semanage_expand_sandbox: Expand module failed /usr/sbin/semodule: Failed!
make: *** [load] Error 1

Quoted 5 lines

Justin P. Mattock
_______________________________________________
refpolicy mailing list
refpolicy at oss.tresys.com
http://oss.tresys.com/mailman/listinfo/refpolicy

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.16 (GNU/Linux)
Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org/

Quoted 9 lines

iEYEARECAAYFAk094K4ACgkQMlxVo39jgT9FUwCfXmy2cKoTO5Zvte5nzPExQ1Nr LOYAoLcsMPdSEktlPzEKG8FeF3M7LCG4
=cQ5o
-----END PGP SIGNATURE-----
_______________________________________________
refpolicy mailing list
refpolicy at oss.tresys.com
http://oss.tresys.com/mailman/listinfo/refpolicy

Justin P. Mattock

#7 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 38 lines · Justin P. Mattock

On 01/24/2011 12:27 PM, Dominick Grift wrote:

Quoted 23 lines · Justin P. Mattock
Quoted 23 lines
Quoted 23 lines · Justin P. Mattock
Quoted 22 lines · Justin P. Mattock
Quoted 21 lines · Christopher J. PeBenito
Quoted 20 lines · Justin P. Mattock
Quoted 7 lines

this is showing up with the latest kernel in enforcing mode.. (I have not update the policy and/or selinux userspace)

[ 12.803882] type=1400 audit(1295457694.801:3): avc: denied { syslog

} for pid=1540 comm="rsyslogd" capability=34 scontext=system_u:system_r:init_t:s0 tcontext=system_u:system_r:init_t:s0 tclass=capability2

[cut]

Quoted 10 lines

when using audit2allow I get:

allow init_t self:capability2 syslog;

which gives an error when trying to install the module, due to the policy not knowing what capability2 is

system is ubuntu maverick, if this is already in(refpolicy) then I'll
pull the latest when I get a chance..

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 3 lines
Quoted 2 lines

Support for this capability is upstream in refpolicy.

well... after building and trying to install, seems I need to do this:

instead add this to policy/modules/services/apm.te:

domain_mmap_low(apmd_t)

Quoted 11 lines
Quoted 1 line

just added this, and now I can build all the way through...

and set boolean: mmap_low_allowed to on to allow apmd_t to mmap low if needed

note though that toggling this boolean also allow wine and "whatsitsname" to mmap low.

Quoted 2 lines

not sure.. this was hitting on a fresh build of the policy no modules or avc's being added yet(stock policy)

stock refpolicy? i am looking at it right now and it has no such rule in there... so i dont know where this came from.

Quoted 40 lines
Quoted 40 lines
Quoted 40 lines
Quoted 40 lines
Quoted 24 lines
   From dae5d4d75ab5db99fde09a67f9a1df240f85fbdd Mon Sep 17 00:00:00

2001
From: Justin P. Mattock<[email protected]>
Date: Mon, 24 Jan 2011 11:13:31 -0800
Subject: [PATCH] modified: policy/modules/kernel/domain.te

policy/modules/kernel/domain.te +1 -1
index bc534c1..77c363b 100644
@@ -24,7 +24,8 @@ attribute unconfined_domain_type;
 
 # Domains that can mmap low memory.
 attribute mmap_low_domain_type;
-neverallow { domain -mmap_low_domain_type } self:memprotect mmap_zero;
+#neverallow { domain -mmap_low_domain_type } self:memprotect
 mmap_zero;
 
 # Domains that can set their current context
Quoted 1 line

# (perform dynamic transitions)

Oops.. forgot to post the error:

pp -i /usr/share/selinux/mcs/xprint.pp -i /usr/share/selinux/mcs/xscreensaver.pp -i /usr/share/selinux/mcs/xserver.pp -i /usr/share/selinux/mcs/yam.pp -i /usr/share/selinux/mcs/zabbix.pp -i /usr/share/selinux/mcs/zebra.pp -i /usr/share/selinux/mcs/zosremote.pp libsepol.check_assertion_helper: neverallow violated by allow apmd_t apmd_t:memprotect { mmap_zero }; libsemanage.semanage_expand_sandbox: Expand module failed /usr/sbin/semodule: Failed!
make: *** [load] Error 1

Quoted 6 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

Justin P. Mattock
_______________________________________________
refpolicy mailing list
refpolicy at oss.tresys.com
http://oss.tresys.com/mailman/listinfo/refpolicy

_______________________________________________
refpolicy mailing list
refpolicy at oss.tresys.com
http://oss.tresys.com/mailman/listinfo/refpolicy

Quoted 3 lines
Quoted 1 line

Justin P. Mattock

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.16 (GNU/Linux)
Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org/

iEYEARECAAYFAk096REACgkQMlxVo39jgT/vrQCdEtZJ9sA0mRXHQCbkqODL6UIc NyQAniSYMHfKeRt3sTv1EwwzPpQOi0oT
=OU1v
-----END PGP SIGNATURE-----

#8 lore raw
Quoted 51 lines · Dominick Grift

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 47 lines · Justin P. Mattock

On 01/24/2011 12:27 PM, Dominick Grift wrote:

Quoted 23 lines · Justin P. Mattock
Quoted 23 lines
Quoted 23 lines · Justin P. Mattock
Quoted 22 lines · Justin P. Mattock
Quoted 21 lines · Christopher J. PeBenito
Quoted 20 lines · Justin P. Mattock
Quoted 7 lines

this is showing up with the latest kernel in enforcing mode.. (I have not update the policy and/or selinux userspace)

[ 12.803882] type=1400 audit(1295457694.801:3): avc: denied { syslog

} for pid=1540 comm="rsyslogd" capability=34 scontext=system_u:system_r:init_t:s0 tcontext=system_u:system_r:init_t:s0 tclass=capability2

[cut]

Quoted 10 lines

when using audit2allow I get:

allow init_t self:capability2 syslog;

which gives an error when trying to install the module, due to the policy not knowing what capability2 is

system is ubuntu maverick, if this is already in(refpolicy) then I'll
pull the latest when I get a chance..

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 3 lines
Quoted 2 lines

Support for this capability is upstream in refpolicy.

well... after building and trying to install, seems I need to do this:

instead add this to policy/modules/services/apm.te:

domain_mmap_low(apmd_t)

Quoted 1 line

just added this, and now I can build all the way through...

and set boolean: mmap_low_allowed to on to allow apmd_t to mmap low if needed

note though that toggling this boolean also allow wine and "whatsitsname" to mmap low.

Quoted 6 lines
Quoted 2 lines
Quoted 2 lines

not sure.. this was hitting on a fresh build of the policy no modules or avc's being added yet(stock policy)

stock refpolicy? i am looking at it right now and it has no such rule in there... so i dont know where this came from.

hmm... well I have loaded the policy from oct(not sure if this is in there), then with the new policy make install, make load(then I hit) maybe some kind of leak or something from the old policy since I have not rebooted

Justin P. Mattock

#9 lore raw
In reply to Dominick Grift
Quoted 4 lines

stock refpolicy? i am looking at it right now and it has no such rule in there... so i dont know where this came from.

ahh.. I think I figured it out.. after removing /etc/selinux/policyname then rebuilding(no commits added etc..) everything builds properly. (I had an old policy which was causing the conflict)

thanks for the help on this..

Justin P. Mattock