angstrom-2010.x.conf: Prefer binutils 2.21 and uclibc-git
PATCH 1/1 angstrom-2010.x.conf: Prefer binutils 2.21 and uclibc-git
* no need to pin older udev with uclibc/git either
--- conf/distro/angstrom-2010.x.conf | 6 +++--- .../include/angstrom-2010-preferred-versions.inc | 1 - 2 files changed, 3 insertions(+), 4 deletions(-)
conf/distro/angstrom-2010.x.conf +3 -3
@@ -71,8 +71,8 @@ PREFERRED_VERSION_linux-libc-headers-native = "${LINUX_LIBC_HEADERS_VERSION}" #Prefer glibc 2.6 and uclibc 0.9.30, these have had the most testing. PREFERRED_VERSION_glibc ?= "2.10.1" PREFERRED_VERSION_glibc-initial ?= "2.10.1" -PREFERRED_VERSION_uclibc ?= "0.9.30.2" -PREFERRED_VERSION_uclibc-initial ?= "0.9.30.2" +PREFERRED_VERSION_uclibc ?= "git" +PREFERRED_VERSION_uclibc-initial ?= "git" PREFERRED_VERSION_eglibc ?= "2.12" PREFERRED_VERSION_eglibc-initial ?= "2.12"
@@ -95,7 +95,7 @@ ANGSTROM_GCC_VERSION_avr32 ?= "4.2.2" #Everybody else can just use this: ANGSTROM_GCC_VERSION ?= "4.5" -ANGSTROM_BINUTILS_VERSION ?= "2.20.1" +ANGSTROM_BINUTILS_VERSION ?= "2.21" PREFERRED_VERSION_binutils ?= "${ANGSTROM_BINUTILS_VERSION}" PREFERRED_VERSION_binutils-cross ?= "${ANGSTROM_BINUTILS_VERSION}"
conf/distro/include/angstrom-2010-preferred-versions.inc +0 -1
@@ -66,7 +66,6 @@ PREFERRED_VERSION_samba = "3.3.9" PREFERRED_VERSION_tiff = "3.9.4+4.0.0beta6" PREFERRED_VERSION_udev = "165" -PREFERRED_VERSION_udev_libc-uclibc = "141" UDEV_GE_141 = "1" PREFERRED_VERSION_usbutils = "0.86"
Signature · 1 line
1.7.0.4
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Quoted 3 lines · Khem Raj
* no need to pin older udev with uclibc/git either
Signed-off-by Khem Raj <[email protected]>
NAK! binutils 2.21 introduces way too many problem at this moment, those need to get solved before switching to it.
Quoted 34 lines
--- conf/distro/angstrom-2010.x.conf | 6 +++--- .../include/angstrom-2010-preferred-versions.inc | 1 - 2 files changed, 3 insertions(+), 4 deletions(-)conf/distro/angstrom-2010.x.conf +3
-3@@ -71,8 +71,8 @@ PREFERRED_VERSION_linux-libc-headers-native = "${LINUX_LIBC_HEADERS_VERSION}" #Prefer glibc 2.6 and uclibc 0.9.30, these have had the most testing. PREFERRED_VERSION_glibc ?= "2.10.1" PREFERRED_VERSION_glibc-initial ?= "2.10.1" -PREFERRED_VERSION_uclibc ?= "0.9.30.2" -PREFERRED_VERSION_uclibc-initial ?= "0.9.30.2" +PREFERRED_VERSION_uclibc ?= "git" +PREFERRED_VERSION_uclibc-initial ?= "git" PREFERRED_VERSION_eglibc ?= "2.12" PREFERRED_VERSION_eglibc-initial ?= "2.12"@@ -95,7 +95,7 @@ ANGSTROM_GCC_VERSION_avr32 ?= "4.2.2" #Everybody else can just use this: ANGSTROM_GCC_VERSION ?= "4.5" -ANGSTROM_BINUTILS_VERSION ?= "2.20.1" +ANGSTROM_BINUTILS_VERSION ?= "2.21" PREFERRED_VERSION_binutils ?= "${ANGSTROM_BINUTILS_VERSION}" PREFERRED_VERSION_binutils-cross ?= "${ANGSTROM_BINUTILS_VERSION}"conf/distro/include/angstrom-2010-preferred-versions.inc +0
-0
conf/distro/include/angstrom-2010-preferred-versions.inc PREFERRED_VERSION_samba = "3.3.9" · line 71
Quoted 7 lines
conf/distro/include/angstrom-2010-preferred-versions.inc +0
-1@@ -66,7 +66,6 @@ PREFERRED_VERSION_samba = "3.3.9" PREFERRED_VERSION_tiff = "3.9.4+4.0.0beta6" PREFERRED_VERSION_udev = "165" -PREFERRED_VERSION_udev_libc-uclibc = "141" UDEV_GE_141 = "1" PREFERRED_VERSION_usbutils = "0.86"
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)
iD8DBQFNPUAeMkyGM64RGpERAm6CAJsHFPAQdphhKT4liYnMNE57ubU32wCfeJim 6pPp+1le2CwVszFtrNlJ+Qk=
=ihdt
-----END PGP SIGNATURE-----
Quoted 10 lines · Koen Kooi
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1Quoted 3 lines · Khem Raj
* no need to pin older udev with uclibc/git either
Signed-off-by Khem Raj <[email protected]>NAK! binutils 2.21 introduces way too many problem at this moment, those need to get solved before switching to it.
hmmm. Too vague a statement. Do you have list of issues somewhere I can look at it built the console-image x11-image images I tried and booted console-image too.
Quoted 57 lines
Quoted 37 lines
---
conf/distro/angstrom-2010.x.conf | 6 +++--- .../include/angstrom-2010-preferred-versions.inc | 1 -2 files changed, 3 insertions(+), 4 deletions(-)conf/distro/angstrom-2010.x.conf +0
-0@@ -71,8 +71,8 @@ PREFERRED_VERSION_linux-libc-headers-native = "${LINUX_LIBC_HEADERS_VERSION}" #Prefer glibc 2.6 and uclibc 0.9.30, these have had the most testing.PREFERRED_VERSION_glibc ?= "2.10.1"
PREFERRED_VERSION_glibc-initial ?= "2.10.1"conf/distro/angstrom-2010.x.conf +2
-2-PREFERRED_VERSION_uclibc ?= "0.9.30.2" -PREFERRED_VERSION_uclibc-initial ?= "0.9.30.2" +PREFERRED_VERSION_uclibc ?= "git" +PREFERRED_VERSION_uclibc-initial ?= "git"PREFERRED_VERSION_eglibc ?= "2.12"
PREFERRED_VERSION_eglibc-initial ?= "2.12"conf/distro/angstrom-2010.x.conf +0
-0@@ -95,7 +95,7 @@ ANGSTROM_GCC_VERSION_avr32 ?= "4.2.2" #Everybody else can just use this:ANGSTROM_GCC_VERSION ?= "4.5"
conf/distro/angstrom-2010.x.conf +1
-1-ANGSTROM_BINUTILS_VERSION ?= "2.20.1" +ANGSTROM_BINUTILS_VERSION ?= "2.21"PREFERRED_VERSION_binutils ?= "${ANGSTROM_BINUTILS_VERSION}" PREFERRED_VERSION_binutils-cross ?= "${ANGSTROM_BINUTILS_VERSION}"
conf/distro/include/angstrom-2010-preferred-versions.inc +0
-0@@ -66,7 +66,6 @@ PREFERRED_VERSION_samba = "3.3.9"PREFERRED_VERSION_tiff = "3.9.4+4.0.0beta6"
Quoted 5 lines
PREFERRED_VERSION_udev = "165"
-PREFERRED_VERSION_udev_libc-uclibc = "141"
UDEV_GE_141 = "1"PREFERRED_VERSION_usbutils = "0.86"
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)iD8DBQFNPUAeMkyGM64RGpERAm6CAJsHFPAQdphhKT4liYnMNE57ubU32wCfeJim 6pPp+1le2CwVszFtrNlJ+Qk=
=ihdt
-----END PGP SIGNATURE-----_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Quoted 12 lines · Khem Raj
On Mon, Jan 24, 2011 at 1:02 AM, Koen Kooi <[email protected]> wrote:
Quoted 3 lines · Khem Raj
Quoted 3 lines
Quoted 3 lines
* no need to pin older udev with uclibc/git either
Signed-off-by Khem Raj <[email protected]>NAK! binutils 2.21 introduces way too many problem at this moment, those need to get solved before switching to it.
Quoted 3 lines
hmmm. Too vague a statement. Do you have list of issues somewhere I can look at it built the console-image x11-image images I tried and booted console-image too.
Try building anything that uses linux-omap-psp 2.6.32. You will run into the secure mode problem. That one is relatively easy to solve, but it needs to get solved *before* the switch, not after.
But besided that, so a change needs to get RFC'd, tested and signed off by the angstrom maintainers before it gets pushed. It's a toolchain change and we take toolchains seriously.
Waking up and seeing it applied without all that is *extremely* insulting. So I reverted it.
Quoted 38 lines
Quoted 38 lines
Quoted 38 lines
Quoted 38 lines
--- conf/distro/angstrom-2010.x.conf | 6 +++--- .../include/angstrom-2010-preferred-versions.inc | 1 - 2 files changed, 3 insertions(+), 4 deletions(-)conf/distro/angstrom-2010.x.conf +3
-3@@ -71,8 +71,8 @@ PREFERRED_VERSION_linux-libc-headers-native = "${LINUX_LIBC_HEADERS_VERSION}" #Prefer glibc 2.6 and uclibc 0.9.30, these have had the most testing. PREFERRED_VERSION_glibc ?= "2.10.1" PREFERRED_VERSION_glibc-initial ?= "2.10.1" -PREFERRED_VERSION_uclibc ?= "0.9.30.2" -PREFERRED_VERSION_uclibc-initial ?= "0.9.30.2" +PREFERRED_VERSION_uclibc ?= "git" +PREFERRED_VERSION_uclibc-initial ?= "git" PREFERRED_VERSION_eglibc ?= "2.12" PREFERRED_VERSION_eglibc-initial ?= "2.12"@@ -95,7 +95,7 @@ ANGSTROM_GCC_VERSION_avr32 ?= "4.2.2" #Everybody else can just use this: ANGSTROM_GCC_VERSION ?= "4.5" -ANGSTROM_BINUTILS_VERSION ?= "2.20.1" +ANGSTROM_BINUTILS_VERSION ?= "2.21" PREFERRED_VERSION_binutils ?= "${ANGSTROM_BINUTILS_VERSION}" PREFERRED_VERSION_binutils-cross ?= "${ANGSTROM_BINUTILS_VERSION}"conf/distro/include/angstrom-2010-preferred-versions.inc +0
-0@@ -66,7 +66,6 @@ PREFERRED_VERSION_samba = "3.3.9" PREFERRED_VERSION_tiff = "3.9.4+4.0.0beta6"
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines
conf/distro/include/angstrom-2010-preferred-versions.inc PREFERRED_VERSION_samba = "3.3.9" · line 71
Quoted 5 lines
conf/distro/include/angstrom-2010-preferred-versions.inc +0
-1PREFERRED_VERSION_udev = "165" -PREFERRED_VERSION_udev_libc-uclibc = "141" UDEV_GE_141 = "1" PREFERRED_VERSION_usbutils = "0.86"
_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
Quoted 6 lines
Quoted 1 line
_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)
iD8DBQFNPUjjMkyGM64RGpERAhlFAJ0WQYEHLjLVp4uJAQ6N75/EYnCYegCfZdMK WxfAO9VF9GtRwgDa5cvFipA=
=hJkJ
-----END PGP SIGNATURE-----
2011/1/24 Koen Kooi <[email protected]>:
Quoted 21 lines
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1Quoted 12 lines · Khem Raj
On Mon, Jan 24, 2011 at 1:02 AM, Koen Kooi <[email protected]> wrote:
Quoted 3 lines · Khem Raj
Quoted 3 lines
Quoted 3 lines
* no need to pin older udev with uclibc/git either
Signed-off-by Khem Raj <[email protected]>NAK! binutils 2.21 introduces way too many problem at this moment, those need to get solved before switching to it.
Quoted 3 lines
hmmm. Too vague a statement. Do you have list of issues somewhere I can look at it built the console-image x11-image images I tried and booted console-image too.
Try building anything that uses linux-omap-psp 2.6.32. You will run into the secure mode problem. That one is relatively easy to solve, but it needs to get solved *before* the switch, not after.
Quoted 7 lines
But besided that, so a change needs to get RFC'd, tested and signed off by the angstrom maintainers before it gets pushed. It's a toolchain change and we take toolchains seriously.
Waking up and seeing it applied without all that is *extremely* insulting. So I reverted it.
Pushing distro changes without review is against the policy:
From http://www.openembedded.org/index.php/Commit_Policy:
* Distro config changes should be reviewed by the distro maintainers where known
Reveting changes from others is also against the policy:
http://www.openembedded.org/index.php/Revert_Policy
(and imho equally bad (or insulting if you prefer))
Do unto others as you would have them do unto you
My two eurocents. Frans.
Quoted 37 lines · Frans Meulenbroeks
2011/1/24 Koen Kooi<[email protected]>:
Quoted 21 lines
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1Quoted 12 lines · Khem Raj
On Mon, Jan 24, 2011 at 1:02 AM, Koen Kooi<[email protected]> wrote:
Quoted 3 lines · Khem Raj
Quoted 3 lines
Quoted 3 lines
* no need to pin older udev with uclibc/git either
Signed-off-by Khem Raj<[email protected]>NAK! binutils 2.21 introduces way too many problem at this moment, those need to get solved before switching to it.
Quoted 3 lines
hmmm. Too vague a statement. Do you have list of issues somewhere I can look at it built the console-image x11-image images I tried and booted console-image too.
Try building anything that uses linux-omap-psp 2.6.32. You will run into the secure mode problem. That one is relatively easy to solve, but it needs to get solved *before* the switch, not after.
Quoted 7 lines
But besided that, so a change needs to get RFC'd, tested and signed off by the angstrom maintainers before it gets pushed. It's a toolchain change and we take toolchains seriously.
Waking up and seeing it applied without all that is *extremely* insulting. So I reverted it.
Pushing distro changes without review is against the policy:
Quoted 1 line
* Distro config changes should be reviewed by the distro maintainers where known
Quoted 8 lines
Reveting changes from others is also against the policy:
http://www.openembedded.org/index.php/Revert_Policy
(and imho equally bad (or insulting if you prefer))
Do unto others as you would have them do unto you
Well, no. I'm pretty sure the "you just broke my distribution" falls into the yes, it's OK to push the revert before the other party wakes up and says "Oops, sorry!".
Signature · 2 lines
Tom Rini Mentor Graphics Corporation
Quoted 13 lines · Frans Meulenbroeks
2011/1/24 Koen Kooi<[email protected]>:
Quoted 3 lines
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1Pushing distro changes without review is against the policy:
Quoted 1 line
* Distro config changes should be reviewed by the distro maintainers where known
Reveting changes from others is also against the policy:
Quoted 8 lines
http://www.openembedded.org/index.php/Revert_Policy
(and imho equally bad (or insulting if you prefer))
Do unto others as you would have them do unto you
My two eurocents. Frans.
Frans, as noted this change intoduces serious issues with some Angstrom targets. The Angstrom devs know what is best for Angstrom. I'm not sure what Khem was thinking by pushing this change without consulting with Angstrom devs.
Philip
Quoted 19 lines · Philip Balister
Quoted 18 lines · Frans Meulenbroeks
2011/1/24 Koen Kooi<[email protected]>:
Quoted 3 lines
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1Pushing distro changes without review is against the policy:
Quoted 1 line
* Distro config changes should be reviewed by the distro maintainers where known
Reveting changes from others is also against the policy:
http://www.openembedded.org/index.php/Revert_Policy
(and imho equally bad (or insulting if you prefer))
Quoted 8 lines
Quoted 3 lines
Do unto others as you would have them do unto you
My two eurocents. Frans.
Frans, as noted this change intoduces serious issues with some Angstrom targets. The Angstrom devs know what is best for Angstrom. I'm not sure what Khem was thinking by pushing this change without consulting with Angstrom devs.
Not to put too many words into Khem's mouth, but I imagine it was that he checked this in on the same branch as the other changes he pushed last night and forgot (time for some 'git stash'ing Khem :))
Signature · 2 lines
Tom Rini Mentor Graphics Corporation
Quoted 6 lines · Tom Rini
Not to put too many words into Khem's mouth, but I imagine it was that he checked this in on the same branch as the other changes he pushed last night and forgot (time for some 'git stash'ing Khem :))
yeah in order to send the review thru git format-patch/git send-email you need to commit it somewhere
and this has bitten me more than once plus it was too late in the night so I will forgive myself but look
for some pre-push hooks to show me what its pushing before it finally does so. If anyone knows
of such a hook please lemme know
Quoted 21 lines · Koen Kooi
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1Quoted 12 lines · Khem Raj
On Mon, Jan 24, 2011 at 1:02 AM, Koen Kooi <[email protected]> wrote:
Quoted 3 lines · Khem Raj
Quoted 3 lines
Quoted 3 lines
* no need to pin older udev with uclibc/git either
Signed-off-by Khem Raj <[email protected]>NAK! binutils 2.21 introduces way too many problem at this moment, those need to get solved before switching to it.
Quoted 3 lines
hmmm. Too vague a statement. Do you have list of issues somewhere I can look at it built the console-image x11-image images I tried and booted console-image too.
Try building anything that uses linux-omap-psp 2.6.32. You will run into the secure mode problem. That one is relatively easy to solve, but it needs to get solved *before* the switch, not after.
Quoted 6 lines
But besided that, so a change needs to get RFC'd, tested and signed off by the angstrom maintainers before it gets pushed. It's a toolchain change and we take toolchains seriously.
Waking up and seeing it applied without all that is *extremely* insulting. So I reverted it.
Koen
bah it was not intentionally pushed. I wanted to push the other gcc change and git push
pushed all branches. I should probably not track remote branches that way git push wont
do this kind of mess. Sorry for the hassle. Thank you for reverting it
Quoted 72 lines
Quoted 39 lines
Quoted 39 lines
Quoted 39 lines
Quoted 39 lines
---
conf/distro/angstrom-2010.x.conf | 6 +++--- .../include/angstrom-2010-preferred-versions.inc | 1 -2 files changed, 3 insertions(+), 4 deletions(-)conf/distro/angstrom-2010.x.conf +0
-0@@ -71,8 +71,8 @@ PREFERRED_VERSION_linux-libc-headers-native = "${LINUX_LIBC_HEADERS_VERSION}" #Prefer glibc 2.6 and uclibc 0.9.30, these have had the most testing.PREFERRED_VERSION_glibc ?= "2.10.1"
PREFERRED_VERSION_glibc-initial ?= "2.10.1"conf/distro/angstrom-2010.x.conf +2
-2-PREFERRED_VERSION_uclibc ?= "0.9.30.2" -PREFERRED_VERSION_uclibc-initial ?= "0.9.30.2" +PREFERRED_VERSION_uclibc ?= "git" +PREFERRED_VERSION_uclibc-initial ?= "git"PREFERRED_VERSION_eglibc ?= "2.12"
PREFERRED_VERSION_eglibc-initial ?= "2.12"conf/distro/angstrom-2010.x.conf +0
-0@@ -95,7 +95,7 @@ ANGSTROM_GCC_VERSION_avr32 ?= "4.2.2" #Everybody else can just use this:ANGSTROM_GCC_VERSION ?= "4.5"
conf/distro/angstrom-2010.x.conf +1
-1-ANGSTROM_BINUTILS_VERSION ?= "2.20.1" +ANGSTROM_BINUTILS_VERSION ?= "2.21"PREFERRED_VERSION_binutils ?= "${ANGSTROM_BINUTILS_VERSION}" PREFERRED_VERSION_binutils-cross ?= "${ANGSTROM_BINUTILS_VERSION}"
conf/distro/include/angstrom-2010-preferred-versions.inc +0
-0@@ -66,7 +66,6 @@ PREFERRED_VERSION_samba = "3.3.9"PREFERRED_VERSION_tiff = "3.9.4+4.0.0beta6"
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines
Quoted 5 lines
PREFERRED_VERSION_udev = "165"
-PREFERRED_VERSION_udev_libc-uclibc = "141"
UDEV_GE_141 = "1"PREFERRED_VERSION_usbutils = "0.86"
_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-develQuoted 6 lines
Quoted 1 line
_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)iD8DBQFNPUjjMkyGM64RGpERAhlFAJ0WQYEHLjLVp4uJAQ6N75/EYnCYegCfZdMK WxfAO9VF9GtRwgDa5cvFipA=
=hJkJ
-----END PGP SIGNATURE-----_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
Hello Khem,
Quoted 5 lines · Khem Raj
Quoted 5 lines
bah it was not intentionally pushed. I wanted to push the other gcc change and git push
pushed all branches. I should probably not track remote branches that way git push wont
do this kind of mess. Sorry for the hassle. Thank you for reverting it
you can set "git config push.default current" to push only the current branch.
Regards,
Andreas