README: add description of sh_eth driver
PATCH 1/2 README: add description of sh_eth driver
Signed-off-by Yoshihiro Shimoda <[email protected]>
--- README | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-)
README +9 -0
@@ -888,6 +888,15 @@ The following options need to be configured: automatically converts one 32 bit word to two 16 bit words you may also try CONFIG_SMC911X_32_BIT. + CONFIG_SH_ETHER + Support for Renesas on-chip Ethernet controller + + CONFIG_SH_ETHER_USE_PORT + Define the number of ports to be used + + CONFIG_SH_ETHER_PHY_ADDR + Define the ETH PHY's address + - USB Support: At the moment only the UHCI host controller is supported (PIP405, MIP405, MPC5200); define
Signature · 1 line
1.7.1
PATCH 1/2 README: add description of sh_eth driver
Ben's -net tree is not working for a long time.
Wolfgang, can I merge these patches to -sh tree?
Best regards,
Nobuhiro
Quoted 31 lines · Yoshihiro Shimoda
Signed-off-by Yoshihiro Shimoda <[email protected]>--- README | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-)README +9
-0@@ -888,6 +888,15 @@ The following options need to be configured: automatically converts one 32 bit word to two 16 bit words you may also try CONFIG_SMC911X_32_BIT. + CONFIG_SH_ETHER + Support for Renesas on-chip Ethernet controller + + CONFIG_SH_ETHER_USE_PORT + Define the number of ports to be used + + CONFIG_SH_ETHER_PHY_ADDR + Define the ETH PHY's address + - USB Support: At the moment only the UHCI host controller is supported (PIP405, MIP405, MPC5200); defineSignature · 5 lines
1.7.1 _______________________________________________ U-Boot mailing list U-Boot at lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot