Skip to contentSkip to conversation

ARM: mx5/board-mx53_evk.c: Make UART1 functional

PATCH New Fabio Estevam 2 participants 4 messages Jan 31, 2011

Subsystems (2)
Arm (32-bit) Arm sub-architectures
lore
Share & tools
lore

Fabio Estevam

author
#0 lore raw

PATCH 1/1 ARM: mx5/board-mx53_evk.c: Make UART1 functional

Fix UART1 IOMUX settings and configure UART1 to work with only RX/TX pins.

Signed-off-by Fabio Estevam <[email protected]>
---
 arch/arm/mach-mx5/board-mx53_evk.c |    4 +---
 1 files changed, 1 insertions(+), 3 deletions(-)
arch/arm/mach-mx5/board-mx53_evk.c +1 -3
index eba9df0..4ee9556 100644
@@ -44,8 +44,6 @@
 static iomux_v3_cfg_t mx53_evk_pads[] = {
 	MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
 	MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
-	MX53_PAD_PATA_DIOW__UART1_TXD_MUX,
-	MX53_PAD_PATA_DMACK__UART1_RXD_MUX,
 
 	MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
 	MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,

@@ -72,7 +70,7 @@ static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = {
 
 static inline void mx53_evk_init_uart(void)
 {
-	imx53_add_imx_uart(0, &mx53_evk_uart_pdata);
+	imx53_add_imx_uart(0, NULL);
 	imx53_add_imx_uart(1, &mx53_evk_uart_pdata);
 	imx53_add_imx_uart(2, &mx53_evk_uart_pdata);
 }
Signature · 1 line
1.6.0.4
#1 lore raw

PATCH 1/1 ARM: mx5/board-mx53_evk.c: Make UART1 functional

Quoted 3 lines · Fabio Estevam

Fix UART1 IOMUX settings and configure UART1 to work with only RX/TX pins.

Signed-off-by Fabio Estevam <[email protected]>

I cannot see a difference to the patch you sent ~5h earlier. ??

Uwe

Signature · 2 lines
Pengutronix e.K.                           | Uwe Kleine-K?nig            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
author
#2 lore raw

PATCH 1/1 ARM: mx5/board-mx53_evk.c: Make UART1 functional

Hi Uwe,

Quoted 5 lines · Uwe Kleine-K?nig
Quoted 3 lines · Fabio Estevam

Fix UART1 IOMUX settings and configure UART1 to work with only RX/TX pins.

Signed-off-by Fabio Estevam <[email protected]>

I cannot see a difference to the patch you sent ~5h earlier. ??

The first patch was targeted for MX53_SMD board. After having sent it I noticed that the MX53_EVK board also had the same issue, then I sent another one for fixing MX53_EVK console.

If you prefer I can combine the two patches into a single one.

Regards,

Fabio Estevam

#3 lore raw

PATCH 1/1 ARM: mx5/board-mx53_evk.c: Make UART1 functional

Hey Fabio,

Quoted 5 lines · Fabio Estevam
Quoted 1 line

I cannot see a difference to the patch you sent ~5h earlier. ??

The first patch was targeted for MX53_SMD board. After having sent it I noticed that the MX53_EVK board also had the same issue, then I sent another one for fixing MX53_EVK console.

Ah, I see.

Quoted 1 line

If you prefer I can combine the two patches into a single one.

I don't care much. I assume it's OK for Sascha as it is.

Best regards and sorry for bothering,
Uwe

Signature · 2 lines
Pengutronix e.K.                           | Uwe Kleine-K?nig            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |