mp2usb: remove board support

PATCH New Eric Bénard 4 participants 6 messages Jan 25, 2011 – Apr 11, 2011

lore

Share & tools

lore

Eric Bénard

author

2011-01-25 22:31 UTC #0 lore raw

PATCH 1/2 mp2usb: remove board support

this board was cancelled long time ago so remove it as it won't be maintained anymore

Signed-off-by Eric B?nard <[email protected]>

---
 board/mp2usb/Makefile    |   50 -----
 board/mp2usb/config.mk   |    3 -
 board/mp2usb/flash.c     |  552 ----------------------------------------------
 board/mp2usb/mp2usb.c    |   98 --------
 include/configs/mp2usb.h |  242 --------------------
 5 files changed, 0 insertions(+), 945 deletions(-)
 delete mode 100644 board/mp2usb/Makefile
 delete mode 100644 board/mp2usb/config.mk
 delete mode 100644 board/mp2usb/flash.c
 delete mode 100644 board/mp2usb/mp2usb.c
 delete mode 100644 include/configs/mp2usb.h

board/mp2usb/Makefile deleted +0 ~~-50~~

deleted file mode 100644
index 335734a..0000000
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS	:= mp2usb.o flash.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################

board/mp2usb/config.mk deleted +0 -3

deleted file mode 100644
index 948e4ff..0000000
@@ -1,3 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x27F00000
-## For testing: load at 0x20100000 and "go" at 0x201000A4
-#CONFIG_SYS_TEXT_BASE = 0x20100000

board/mp2usb/flash.c deleted +0 ~~-552~~

552 lines not on this page · raw message

board/mp2usb/mp2usb.c deleted +0 ~~-98~~

98 lines not on this page · raw message

include/configs/mp2usb.h deleted +0 ~~-242~~

242 lines not on this page · raw message

Signature · 1 line

1.7.3.5

Eric Bénard

author

2011-01-25 22:31 UTC #1 lore raw

PATCH 2/2 cpu9260: update board support

- update to new relocation code
- switch to boards.cfg
- get rid of LEGACY (still a little hack in .h to compile)
- add nand boot configuration
- boot tested for the following configurations :

	9260 (64MB RAM & nor boot)
	9260_nand (64MB RAM & nand boot)
	9G20_128M (128MB RAM & nor boot)
	9G20_nand_128M (128MB RAM & nand boot)
	(nor boot is using lowlevel init)

Signed-off-by Eric B?nard <[email protected]>

---
 board/eukrea/cpu9260/config.mk |    1 -
 board/eukrea/cpu9260/cpu9260.c |  161 +++++++++++++++++----------------------
 board/eukrea/cpu9260/led.c     |   36 +++++----
 boards.cfg                     |    8 ++
 include/configs/cpu9260.h      |  164 +++++++++++++++++++++++++++------------
 5 files changed, 209 insertions(+), 161 deletions(-)
 delete mode 100644 board/eukrea/cpu9260/config.mk

board/eukrea/cpu9260/config.mk deleted +0 -1

deleted file mode 100644
index 2077692..0000000
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x21f00000

board/eukrea/cpu9260/cpu9260.c +69 ~~-92~~

232 lines not on this page · raw message

board/eukrea/cpu9260/led.c +19 ~~-17~~

index e73543b..d0906bc 100644
@@ -35,65 +35,67 @@ static unsigned int saved_state[4] = {STATUS_LED_OFF, STATUS_LED_OFF,
 
 void coloured_LED_init(void)
 {
+	at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+
 	/* Enable clock */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC);
+	writel(1 << AT91SAM9260_ID_PIOC, &pmc->pcer);
 
-	at91_set_gpio_output(CONFIG_RED_LED, 1);
-	at91_set_gpio_output(CONFIG_GREEN_LED, 1);
-	at91_set_gpio_output(CONFIG_YELLOW_LED, 1);
-	at91_set_gpio_output(CONFIG_BLUE_LED, 1);
+	at91_set_pio_output(CONFIG_RED_LED, 1);
+	at91_set_pio_output(CONFIG_GREEN_LED, 1);
+	at91_set_pio_output(CONFIG_YELLOW_LED, 1);
+	at91_set_pio_output(CONFIG_BLUE_LED, 1);
 
-	at91_set_gpio_value(CONFIG_RED_LED, 1);
-	at91_set_gpio_value(CONFIG_GREEN_LED, 1);
-	at91_set_gpio_value(CONFIG_YELLOW_LED, 1);
-	at91_set_gpio_value(CONFIG_BLUE_LED, 1);
+	at91_set_pio_value(CONFIG_RED_LED, 1);
+	at91_set_pio_value(CONFIG_GREEN_LED, 1);
+	at91_set_pio_value(CONFIG_YELLOW_LED, 1);
+	at91_set_pio_value(CONFIG_BLUE_LED, 1);
 }
 
 void red_LED_off(void)
 {
-	at91_set_gpio_value(CONFIG_RED_LED, 1);
+	at91_set_pio_value(CONFIG_RED_LED, 1);
 	saved_state[STATUS_LED_RED] = STATUS_LED_OFF;
 }
 
 void green_LED_off(void)
 {
-	at91_set_gpio_value(CONFIG_GREEN_LED, 1);
+	at91_set_pio_value(CONFIG_GREEN_LED, 1);
 	saved_state[STATUS_LED_GREEN] = STATUS_LED_OFF;
 }
 
 void yellow_LED_off(void)
 {
-	at91_set_gpio_value(CONFIG_YELLOW_LED, 1);
+	at91_set_pio_value(CONFIG_YELLOW_LED, 1);
 	saved_state[STATUS_LED_YELLOW] = STATUS_LED_OFF;
 }
 
 void blue_LED_off(void)
 {
-	at91_set_gpio_value(CONFIG_BLUE_LED, 1);
+	at91_set_pio_value(CONFIG_BLUE_LED, 1);
 	saved_state[STATUS_LED_BLUE] = STATUS_LED_OFF;
 }
 
 void red_LED_on(void)
 {
-	at91_set_gpio_value(CONFIG_RED_LED, 0);
+	at91_set_pio_value(CONFIG_RED_LED, 0);
 	saved_state[STATUS_LED_RED] = STATUS_LED_ON;
 }
 
 void green_LED_on(void)
 {
-	at91_set_gpio_value(CONFIG_GREEN_LED, 0);
+	at91_set_pio_value(CONFIG_GREEN_LED, 0);
 	saved_state[STATUS_LED_GREEN] = STATUS_LED_ON;
 }
 
 void yellow_LED_on(void)
 {
-	at91_set_gpio_value(CONFIG_YELLOW_LED, 0);
+	at91_set_pio_value(CONFIG_YELLOW_LED, 0);
 	saved_state[STATUS_LED_YELLOW] = STATUS_LED_ON;
 }
 
 void blue_LED_on(void)
 {
-	at91_set_gpio_value(CONFIG_BLUE_LED, 0);
+	at91_set_pio_value(CONFIG_BLUE_LED, 0);
 	saved_state[STATUS_LED_BLUE] = STATUS_LED_ON;
 }

boards.cfg +8 -0

index d01f88d..982f225 100644
@@ -74,6 +74,14 @@ omap1510inn                  arm         arm925t     -                   ti
 aspenite                     arm         arm926ejs   -                   Marvell        armada100
 afeb9260                     arm         arm926ejs   -                   -              at91
 at91cap9adk                  arm         arm926ejs   -                   atmel          at91
+cpu9260                      arm         arm926ejs   cpu9260             eukrea         at91        cpu9260:CPU9260
+cpu9260_nand                 arm         arm926ejs   cpu9260             eukrea         at91        cpu9260:CPU9260,NANDBOOT
+cpu9260_128M                 arm         arm926ejs   cpu9260             eukrea         at91        cpu9260:CPU9260_128M
+cpu9260_nand_128M            arm         arm926ejs   cpu9260             eukrea         at91        cpu9260:CPU9260_128M,NANDBOOT
+cpu9G20                      arm         arm926ejs   cpu9260             eukrea         at91        cpu9260:CPU9G20
+cpu9G20_nand                 arm         arm926ejs   cpu9260             eukrea         at91        cpu9260:CPU9G20,NANDBOOT
+cpu9G20_128M                 arm         arm926ejs   cpu9260             eukrea         at91        cpu9260:CPU9G20_128M
+cpu9G20_nand_128M            arm         arm926ejs   cpu9260             eukrea         at91        cpu9260:CPU9G20_128M,NANDBOOT
 top9000eval_xe               arm         arm926ejs   top9000             emk            at91        top9000:EVAL9000
 top9000su_xe                 arm         arm926ejs   top9000             emk            at91        top9000:SU9000
 meesc                        arm         arm926ejs   -                   esd            at91

include/configs/cpu9260.h +113 ~~-51~~

297 lines not on this page · raw message

Signature · 1 line

1.7.3.5

Reinhard Meyer

2011-04-11 10:51 UTC #2 lore raw

PATCH 2/2 cpu9260: update board support

Dear Eric B?nard,

Quoted 20 lines

- update to new relocation code
- switch to boards.cfg
- get rid of LEGACY (still a little hack in .h to compile)
- add nand boot configuration
- boot tested for the following configurations :

	9260 (64MB RAM & nor boot)
	9260_nand (64MB RAM & nand boot)
	9G20_128M (128MB RAM & nor boot)
	9G20_nand_128M (128MB RAM & nand boot)
	(nor boot is using lowlevel init)

Signed-off-by Eric B?nard <[email protected]>

---
 board/eukrea/cpu9260/config.mk |    1 -
 board/eukrea/cpu9260/cpu9260.c |  161 +++++++++++++++++----------------------
 board/eukrea/cpu9260/led.c     |   36 +++++----
 boards.cfg                     |    8 ++
 include/configs/cpu9260.h      |  164 +++++++++++++++++++++++++++------------
 5 files changed, 209 insertions(+), 161 deletions(-)
 delete mode 100644 board/eukrea/cpu9260/config.mk

...

include/configs/cpu9260.h line 34

Quoted 10 lines

include/configs/cpu9260.h +1 -1

index d239423..09dc03c 100644
@@ -31,9 +31,11 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_AT91_LEGACY
+/* to be removed once maemory-map.h is fixed */

That would be "memory-map.h".
However memory-map.h does not exist anymore.

include/configs/cpu9260.h line 36

Quoted 2 lines

include/configs/cpu9260.h +2 -0

+#define AT91_BASE_SYS	0xffffe800
+#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)

Above two defines should nowhere be needed anymore. Please fix globally.

Quoted 8 lines

include/configs/cpu9260.h +1 -1

-#define CONFIG_DISPLAY_CPUINFO	1
+#include <asm/sizes.h>
 
 #define CONFIG_SYS_AT91_MAIN_CLOCK	18432000
 #define CONFIG_SYS_HZ		1000

@@ -54,13 +56,23 @@
 #error "Unknown board"
 #endif

include/configs/cpu9260.h line 67

Quoted 10 lines

include/configs/cpu9260.h +3 -0

 
+#define CONFIG_AT91FAMILY
 #define CONFIG_ARCH_CPU_INIT
 #undef CONFIG_USE_IRQ
+#define CONFIG_DISPLAY_CPUINFO		1
+#define CONFIG_BOARD_EARLY_INIT_F	1
 
 #define CONFIG_CMDLINE_TAG		1
 #define CONFIG_SETUP_MEMORY_TAGS 	1
 #define CONFIG_INITRD_TAG		1

Please no "1" anymore for just defines, unless the value 1 is really used as a value.

Quoted 272 lines

include/configs/cpu9260.h +102 ~~-48~~

+#if defined(CONFIG_NANDBOOT)
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_TEXT_BASE           0x23f00000
+#else
+#define CONFIG_SYS_TEXT_BASE           0x00000000
+#endif
+
 /* clocks */
 #if defined(CONFIG_CPU9G20)
 #define MASTER_PLL_DIV		0x01

@@ -113,8 +125,8 @@
 
 /* EBI_CSA, 3.3V, no pull-ups for D[15:0], CS1 SDRAM, CS3 NAND Flash */
 #define CONFIG_SYS_MATRIX_EBICSA_VAL		\
-       (AT91_MATRIX_DBPUC | AT91_MATRIX_CS1A_SDRAMC |\
-       AT91_MATRIX_CS3A_SMC_SMARTMEDIA | AT91_MATRIX_VDDIOMSEL)
+		(AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_EBI_CS1A | \
+		AT91_MATRIX_CSA_EBI_CS3A | AT91_MATRIX_CSA_VDDIOMSEL_3_3V)
 
 /* SDRAM */
 /* SDRAMC_MR Mode register */

@@ -199,51 +211,52 @@
 /* setup SMC0, CS0 (NOR Flash) - 16-bit */
 #if defined(CONFIG_CPU9G20)
 #define CONFIG_SYS_SMC0_SETUP0_VAL					\
-		(AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) |	\
-		 AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0))
+		(AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) |	\
+		 AT91_SMC_SETUP_NRD(0) | AT91_SMC_SETUP_NCS_RD(0))
 #define CONFIG_SYS_SMC0_PULSE0_VAL					\
-		(AT91_SMC_NWEPULSE_(8) | AT91_SMC_NCS_WRPULSE_(8) |	\
-		 AT91_SMC_NRDPULSE_(14) | AT91_SMC_NCS_RDPULSE_(14))
+		(AT91_SMC_PULSE_NWE(8) | AT91_SMC_PULSE_NCS_WR(8) |	\
+		 AT91_SMC_PULSE_NRD(14) | AT91_SMC_PULSE_NCS_RD(14))
 #define CONFIG_SYS_SMC0_CYCLE0_VAL	\
-		(AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(14))
+		(AT91_SMC_CYCLE_NWE(8) | AT91_SMC_CYCLE_NRD(14))
 #define CONFIG_SYS_SMC0_MODE0_VAL				\
-		(AT91_SMC_READMODE | AT91_SMC_WRITEMODE |	\
-		 AT91_SMC_DBW_16 |				\
-		 AT91_SMC_TDFMODE |				\
-		 AT91_SMC_TDF_(3))
+		(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |	\
+		 AT91_SMC_MODE_DBW_16 |				\
+		 AT91_SMC_MODE_TDF |				\
+		 AT91_SMC_MODE_TDF_CYCLE(3))
 #elif defined(CONFIG_CPU9260)
 #define CONFIG_SYS_SMC0_SETUP0_VAL					\
-		(AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) |	\
-		 AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0))
+		(AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) |	\
+		 AT91_SMC_SETUP_NRD(0) | AT91_SMC_SETUP_NCS_RD(0))
 #define CONFIG_SYS_SMC0_PULSE0_VAL					\
-		(AT91_SMC_NWEPULSE_(6) | AT91_SMC_NCS_WRPULSE_(6) |	\
-		 AT91_SMC_NRDPULSE_(10) | AT91_SMC_NCS_RDPULSE_(10))
+		(AT91_SMC_PULSE_NWE(6) | AT91_SMC_PULSE_NCS_WR(6) |	\
+		 AT91_SMC_PULSE_NRD(10) | AT91_SMC_PULSE_NCS_RD(10))
 #define CONFIG_SYS_SMC0_CYCLE0_VAL	\
-		(AT91_SMC_NWECYCLE_(6) | AT91_SMC_NRDCYCLE_(10))
+		(AT91_SMC_CYCLE_NWE(6) | AT91_SMC_CYCLE_NRD(10))
 #define CONFIG_SYS_SMC0_MODE0_VAL				\
-		(AT91_SMC_READMODE | AT91_SMC_WRITEMODE |	\
-		 AT91_SMC_DBW_16 |				\
-		 AT91_SMC_TDFMODE |				\
-		 AT91_SMC_TDF_(2))
+		(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |	\
+		 AT91_SMC_MODE_DBW_16 |				\
+		 AT91_SMC_MODE_TDF |				\
+		 AT91_SMC_MODE_TDF_CYCLE(2))
 #endif
 
 /* user reset enable */
 #define CONFIG_SYS_RSTC_RMR_VAL			\
 		(AT91_RSTC_KEY |		\
-		AT91_RSTC_PROCRST |		\
-		AT91_RSTC_RSTTYP_WAKEUP |	\
-		AT91_RSTC_RSTTYP_WATCHDOG)
+		AT91_RSTC_CR_PROCRST |		\
+		AT91_RSTC_MR_ERSTL(1) |	\
+		AT91_RSTC_MR_ERSTL(2))
 
 /* Disable Watchdog */
 #define CONFIG_SYS_WDTC_WDMR_VAL				\
-		(AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT |	\
-		 AT91_WDT_WDV |					\
-		 AT91_WDT_WDDIS |				\
-		 AT91_WDT_WDD)
+		(AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT |	\
+		 AT91_WDT_MR_WDV(0xfff) |			\
+		 AT91_WDT_MR_WDDIS |				\
+		 AT91_WDT_MR_WDD(0xfff))
 
 /*
  * Hardware drivers
  */
+#define CONFIG_AT91SAM9_WATCHDOG	1
 #define CONFIG_AT91_GPIO	1
 #define CONFIG_ATMEL_USART	1
 #undef CONFIG_USART0

@@ -276,15 +289,16 @@
 #define CONFIG_CMD_NAND		1
 #define CONFIG_CMD_USB		1
 #define CONFIG_CMD_FAT		1
+#define CONFIG_CMD_MII		1
 
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS	1
-#define PHYS_SDRAM		0x20000000
+#define CONFIG_SYS_SDRAM_BASE		0x20000000
 #if defined(CONFIG_CPU9260_128M) || defined(CONFIG_CPU9G20_128M)
-#define PHYS_SDRAM_SIZE		0x08000000	/* 128 MB */
+#define CONFIG_SYS_SDRAM_SIZE		SZ_128M
 #define CONFIG_SYS_SDRC_CR_VAL	CONFIG_SYS_SDRC_CR_VAL_128MB
 #else
-#define PHYS_SDRAM_SIZE		0x04000000	/* 64 MB */
+#define CONFIG_SYS_SDRAM_SIZE		SZ_64M
 #define CONFIG_SYS_SDRC_CR_VAL	CONFIG_SYS_SDRC_CR_VAL_64MB
 #endif

@@ -294,12 +308,15 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE		1
 #define CONFIG_SYS_NAND_BASE			0x40000000
 #define CONFIG_SYS_NAND_DBW_8			1
-#define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC13
-#define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
+#define CONFIG_SYS_NAND_READY_PIN		AT91_PIO_PORTC, 13
+#define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIO_PORTC, 14
 #define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
 #define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
 
 /* NOR flash */
+#if defined(CONFIG_NANDBOOT)
+#define CONFIG_SYS_NO_FLASH			1
+#else
 #define CONFIG_SYS_FLASH_CFI			1
 #define CONFIG_FLASH_CFI_DRIVER			1
 #define PHYS_FLASH_1				0x10000000

@@ -314,11 +331,11 @@
 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
 #define CONFIG_SYS_FLASH_PROTECTION		1
 #define CONFIG_SYS_MONITOR_BASE			PHYS_FLASH_1
+#endif
 
 /* Ethernet */
 #define CONFIG_MACB				1
 #define CONFIG_RMII				1
-#define CONFIG_RESET_PHY_R			1
 #define CONFIG_NET_MULTI			1
 #define CONFIG_NET_RETRY_COUNT			20
 #define CONFIG_MACB_SEARCH_PHY			1

@@ -350,10 +367,10 @@
 /* Optional value */
 #define STATUS_LED_BOOT				STATUS_LED_BIT
 
-#define CONFIG_RED_LED				AT91_PIN_PC11
-#define CONFIG_GREEN_LED			AT91_PIN_PC12
-#define CONFIG_YELLOW_LED			AT91_PIN_PC7
-#define CONFIG_BLUE_LED				AT91_PIN_PC9
+#define CONFIG_RED_LED				AT91_PIO_PORTC, 11
+#define CONFIG_GREEN_LED			AT91_PIO_PORTC, 12
+#define CONFIG_YELLOW_LED			AT91_PIO_PORTC, 7
+#define CONFIG_BLUE_LED				AT91_PIO_PORTC, 9
 
 /* USB */
 #define CONFIG_USB_ATMEL			1

@@ -361,17 +378,33 @@
 #define CONFIG_DOS_PARTITION			1
 #define CONFIG_SYS_USB_OHCI_CPU_INIT		1
 #define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00500000
+#if defined(CONFIG_CPU9G20)
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9g20"
+#elif defined(CONFIG_CPU9260)
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9260"
+#endif
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
 #define CONFIG_USB_STORAGE			1
 
 #define CONFIG_SYS_LOAD_ADDR			0x21000000
 
-#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END			0x21e00000
+#define CONFIG_SYS_MEMTEST_START		CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END			\
+	(CONFIG_SYS_MEMTEST_START + CONFIG_SYS_SDRAM_SIZE - SZ_512K)
 
-#undef CONFIG_SYS_USE_NANDFLASH
+#if defined(CONFIG_NANDBOOT)
+#define CONFIG_SYS_USE_NANDFLASH		1
+#undef CONFIG_SYS_USE_FLASH
+#else
 #define CONFIG_SYS_USE_FLASH			1
+#undef CONFIG_SYS_USE_NANDFLASH
+#endif
+
+#if defined(CONFIG_CPU9G20)
+#define CONFIG_SYS_BASEDIR	"cpu9G20"
+#elif defined(CONFIG_CPU9260)
+#define CONFIG_SYS_BASEDIR	"cpu9260"
+#endif
 
 #if defined(CONFIG_SYS_USE_FLASH)
 #define CONFIG_ENV_IS_IN_FLASH		1

@@ -382,7 +415,7 @@
 
 #define CONFIG_BOOTCOMMAND		"run flashboot"
 
-#define MTDIDS_DEFAULT	 	"nor0=physmap-flash.0,nand0=atmel_nand"
+#define MTDIDS_DEFAULT		"nor0=physmap-flash.0,nand0=atmel_nand"
 #define MTDPARTS_DEFAULT		\
 	"mtdparts=physmap-flash.0:"	\
 		"256k(u-boot)ro,"	\

@@ -393,18 +426,12 @@
 
 #define CONFIG_BOOTARGS "root=/dev/mtdblock3 rootfstype=jffs2 "
 
-#if defined(CONFIG_CPU9G20)
-#define CONFIG_SYS_BASEDIR	"cpu9G20"
-#elif defined(CONFIG_CPU9260)
-#define CONFIG_SYS_BASEDIR	"cpu9260"
-#endif
-
 #define CONFIG_EXTRA_ENV_SETTINGS				\
 	"mtdids=" MTDIDS_DEFAULT "\0"				\
 	"mtdparts=" MTDPARTS_DEFAULT "\0"			\
 	"partition=nand0,0\0"					\
 	"ramargs=setenv bootargs $(bootargs) $(mtdparts)\0"	\
-	"ramboot=tftpboot 0x22000000 cpu9260/uImage;"		\
+	"ramboot=tftpboot 0x22000000 $(basedir)/uImage;"	\
 		"run ramargs;bootm 22000000\0"			\
 	"flashboot=run ramargs;bootm 0x10060000\0"		\
 	"basedir=" CONFIG_SYS_BASEDIR "\0"			\

@@ -421,6 +448,38 @@
 		"0x10220000 0x13ffffff;cp.b 0x24000000 "	\
 		"0x10220000 $(filesize)\0" \
 	""
+#elif defined(CONFIG_NANDBOOT)
+#define CONFIG_ENV_IS_IN_NAND		1
+#define CONFIG_ENV_OFFSET		0x60000
+#define CONFIG_ENV_OFFSET_REDUND	0x80000
+#define CONFIG_ENV_SECT_SIZE		0x20000
+#define	CONFIG_ENV_SIZE			0x20000
+#define CONFIG_ENV_OVERWRITE		1
+
+#define CONFIG_BOOTCOMMAND		"run flashboot"
+
+#define MTDIDS_DEFAULT		"nand0=atmel_nand"
+#define MTDPARTS_DEFAULT		\
+	"mtdparts=atmel_nand:"		\
+		"128k(bootstrap)ro,"	\
+		"256k(u-boot)ro,"	\
+		"128k(u-boot-env)ro,"	\
+		"128k(u-boot-env2)ro,"	\
+		"2M(kernel),"	\
+		"-(rootfs)"
+
+#define CONFIG_BOOTARGS "root=/dev/mtdblock5 rootfstype=ubifs "
+
+#define CONFIG_EXTRA_ENV_SETTINGS				\
+	"mtdids=" MTDIDS_DEFAULT "\0"				\
+	"mtdparts=" MTDPARTS_DEFAULT "\0"			\
+	"partition=nand0,5\0"					\
+	"ramargs=setenv bootargs $(bootargs) $(mtdparts)\0"	\
+	"ramboot=tftpboot 0x22000000 $(basedir)/uImage;"	\
+		"run ramargs;bootm 22000000\0"			\
+	"flashboot=run ramargs; nand read 0x22000000 0xA0000 "	\
+		"0x200000; bootm 0x22000000\0"			\
+	"basedir=" CONFIG_SYS_BASEDIR "\0"
 #endif
 
 #define CONFIG_BAUDRATE			115200

include/configs/cpu9260.h line 511

Quoted 8 lines

include/configs/cpu9260.h +4 -1

@@ -446,7 +505,10 @@
 #define CONFIG_SYS_MALLOC_LEN		\
 		ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
 
-#define CONFIG_STACKSIZE		(32 * 1024)
+#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_SDRAM_BASE + SZ_4K - \
+				GENERATED_GBL_DATA_SIZE)
+
+#define CONFIG_STACKSIZE		SZ_32K

No SZ_ maxros anymore. Please fix globally.

include/configs/cpu9260.h line 514

Quoted 3 lines

include/configs/cpu9260.h +0 -0

 #if defined(CONFIG_USE_IRQ)
 #error CONFIG_USE_IRQ not supported

Best Regards,

Reinhard

Eric Bénard

author

2011-04-11 11:58 UTC #3 lore raw

PATCH 2/2 cpu9260: update board support

Hi Reinhard,

Quoted 5 lines · Reinhard Meyer

Quoted 1 line
+/* to be removed once maemory-map.h is fixed */
That would be "memory-map.h".
However memory-map.h does not exist anymore.

.../...

Quoted 3 lines

Please no "1" anymore for just defines, unless the value 1 is really used as a value.

.../...

Quoted 3 lines

No SZ_ maxros anymore. Please fix globally.

please check v2 :
http://patchwork.ozlabs.org/patch/89540/

Thanks,
Eric

Albert ARIBAUD

2011-02-02 06:38 UTC #4 lore raw

PATCH 1/2 mp2usb: remove board support

In reply to Eric Bénard

Hi Eric,

Le 25/01/2011 23:31, Eric B?nard a ?crit :

Quoted 11 lines

this board was cancelled long time ago so remove it as it won't be maintained anymore

Signed-off-by Eric B?nard<[email protected]>

---
  board/mp2usb/Makefile    |   50 -----
  board/mp2usb/config.mk   |    3 -
  board/mp2usb/flash.c     |  552 ----------------------------------------------
  board/mp2usb/mp2usb.c    |   98 --------
  include/configs/mp2usb.h |  242 --------------------
  5 files changed, 0 insertions(+), 945 deletions(-)

Quoted 5 lines

delete mode 100644 board/mp2usb/Makefile
delete mode 100644 board/mp2usb/config.mk
delete mode 100644 board/mp2usb/flash.c
delete mode 100644 board/mp2usb/mp2usb.c
delete mode 100644 include/configs/mp2usb.h

This patch does not remove the mp2usb from boards.cfg. Can you please fix that?

Amicalement,

Signature · 1 line

Albert.

Wolfgang Denk

Applied

2011-04-11 20:44 UTC #5 lore raw

PATCH 1/2 mp2usb: remove board support

In reply to Eric Bénard

Dear =?UTF-8?q?Eric=20B=C3=A9nard?=,

Quoted 5 lines · In message <[email protected]> you wrote:

this board was cancelled long time ago so remove it as it won't be maintained anymore
Signed-off-by Eric B?nard <[email protected]>

Quoted 12 lines

---
 board/mp2usb/Makefile    |   50 -----
 board/mp2usb/config.mk   |    3 -
 board/mp2usb/flash.c     |  552 ----------------------------------------------
 board/mp2usb/mp2usb.c    |   98 --------
 include/configs/mp2usb.h |  242 --------------------
 5 files changed, 0 insertions(+), 945 deletions(-)
 delete mode 100644 board/mp2usb/Makefile
 delete mode 100644 board/mp2usb/config.mk
 delete mode 100644 board/mp2usb/flash.c
 delete mode 100644 board/mp2usb/mp2usb.c
 delete mode 100644 include/configs/mp2usb.h

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 5 lines

DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
No one can guarantee the actions of another.
	-- Spock, "Day of the Dove", stardate unknown