mpc5125: nand flash commands
Hello,
Have anybody made the nand support for mpc5125, especially commads for flashing first stage boot loader and U-Boot:nand_e, nand_w and nand_loader, which are implemented in /fscale/cys/git-freescale/u-boot-2009.03/drivers/mtd/nand/mpc5125_nfc_mtc.c.
The BSP from Freescale has these commands as as object file not source. We need these sources to implement nand programming in our JTAG programmer.
Since U-Boot is GPL licensed all sources shout be public.
Thanks in advance.
Regards,
Asen
Quoted 2 lines · RONETIX - Asen Dimov
Hello,
Hi,
Quoted 4 lines
Have anybody made the nand support for mpc5125, especially commads for flashing first stage boot loader and U-Boot:
nand_e,nand_wandnand_loader, which are implemented in /fscale/cys/git-freescale/u-boot-2009.03/drivers/mtd/nand/mpc5125_nfc_mtc.c.
They are not part of U-Boot mainline, and for this reason they are not discussed here. There is no mpc5125 NAND driver in u-boot mainline at the moment.
Quoted 6 lines
The BSP from Freescale has these commands as as object file not source. We need these sources to implement nand programming in our JTAG programmer.
Since U-Boot is GPL licensed all sources shout be public.
You are right. Ask Freescale to publish those sources.
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================