omap3_beagle: Switch default console from ttyS2 to ttyO2
PATCH 1/1 omap3_beagle: Switch default console from ttyS2 to ttyO2
Linux kernels >= 2.6.36 are using ttyOn instead ttySn for the serials on OMAPs.
--- include/configs/omap3_beagle.h | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
include/configs/omap3_beagle.h +1 -1
@@ -189,7 +189,7 @@#define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ "usbtty=cdc_acm\0" \ - "console=ttyS2,115200n8\0" \ + "console=ttyO2,115200n8\0" \ "mpurate=500\0" \ "vram=12M\0" \ "dvimode=1024x768MR-16 at 60\0" \
Signature · 1 line
1.7.3.4
PATCH 1/1 omap3_beagle: Switch default console from ttyS2 to ttyO2
Quoted 4 lines · Alexander Holler
Linux kernels >= 2.6.36 are using ttyOn instead ttySn for the serials on OMAPs.
Signed-off-by Alexander Holler <[email protected]>
Ack.
Quoted 25 lines
---
?include/configs/omap3_beagle.h | ? ?2 +-
?1 files changed, 1 insertions(+), 1 deletions(-)include/configs/omap3_beagle.h +1
-2@@ -189,7 +189,7 @@ ?#define CONFIG_EXTRA_ENV_SETTINGS \ ? ? ? ?"loadaddr=0x82000000\0" \ ? ? ? ?"usbtty=cdc_acm\0" \ - ? ? ? "console=ttyS2,115200n8\0" \ + ? ? ? "console=ttyO2,115200n8\0" \ ? ? ? ?"mpurate=500\0" \ ? ? ? ?"vram=12M\0" \ ? ? ? ?"dvimode=1024x768MR-16 at 60\0" \ --1.7.3.4
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
PATCH 1/1 omap3_beagle: Switch default console from ttyS2 to ttyO2
Hello Alexander,
Am 02.03.2011 00:13, schrieb Jason Kridner:
Quoted 12 lines · Alexander Holler
Quoted 4 lines
Linux kernels >= 2.6.36 are using ttyOn instead ttySn for the serials on OMAPs.
Signed-off-by Alexander Holler <[email protected]>Ack.
Quoted 4 lines
--- include/configs/omap3_beagle.h | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
Quoted 15 lines
Quoted 14 lines
include/configs/omap3_beagle.h +1
-2@@ -189,7 +189,7 @@#define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ "usbtty=cdc_acm\0" \ - "console=ttyS2,115200n8\0" \ + "console=ttyO2,115200n8\0" \ "mpurate=500\0" \ "vram=12M\0" \ "dvimode=1024x768MR-16 at 60\0" \ --Quoted 1 line
1.7.3.4
can you please do this for all omap3 boards? Or we have in the end 10 patches for the same problem.
Thomas
Hello,
Am 02.03.2011 11:50, schrieb Thomas Weber:
Quoted 5 lines
Hello Alexander,
Am 02.03.2011 00:13, schrieb Jason Kridner:Quoted 3 lines · Alexander Holler
Quoted 2 lines
Linux kernels>= 2.6.36 are using ttyOn instead ttySn for the serials on OMAPs.
...
Quoted 2 lines
can you please do this for all omap3 boards? Or we have in the end 10 patches for the same problem.
Sorry, no. I don't know which boards are using which kernel versions and there are many boards around with and SDK which are using older kernels. I think the time of the change should be decided by every board-maintainer.
Regards,
Alexander
Le 02/03/2011 12:00, Alexander Holler a ?crit :
Quoted 14 lines
Hello,
Am 02.03.2011 11:50, schrieb Thomas Weber:
Quoted 5 lines
Hello Alexander,
Am 02.03.2011 00:13, schrieb Jason Kridner:Quoted 3 lines · Alexander Holler
Quoted 2 lines
Linux kernels>= 2.6.36 are using ttyOn instead ttySn for the serials on OMAPs.
....
Quoted 2 lines
can you please do this for all omap3 boards? Or we have in the end 10 patches for the same problem.
Quoted 7 lines
Sorry, no. I don't know which boards are using which kernel versions and there are many boards around with and SDK which are using older kernels. I think the time of the change should be decided by every board-maintainer.
Regards,
Alexander
Apart from Thomas' question, there seems to be no Nak for this patch -- I've taken the liberty to Cc: the board maintainer just in case -- so we might as well apply it.
Wolfgang, which tree is this patch supposed to go through? Mine because the board is ARM? yours because it is a board, not arch, patch? Or whichever?
If mine is ok then I'll apply it to next as in any cas it is not a bugfix.
Amicalement,
Signature · 1 line
Albert.
PATCH 1/1 omap3_beagle: Switch default console from ttyS2 to ttyO2
Am 24.03.2011 14:01, schrieb Albert ARIBAUD:
Quoted 1 line
Cc ing Dirk as the omap3_beagle maintainer, and Wolfgang for advice.
...
Quoted 7 lines
Apart from Thomas' question, there seems to be no Nak for this patch -- I've taken the liberty to Cc: the board maintainer just in case -- so we might as well apply it.
Wolfgang, which tree is this patch supposed to go through? Mine because the board is ARM? yours because it is a board, not arch, patch? Or whichever?
Oh, sorry, haven't seen that Dirk is the maintainer, I've only added the TI-maintainer to cc, which might be wrong.
Regards,
Alexander Holler
Dear Albert ARIBAUD,
Quoted 4 lines · In message <[email protected]> you wrote:
Wolfgang, which tree is this patch supposed to go through? Mine because the board is ARM? yours because it is a board, not arch, patch? Or whichever?
Formally it would need Dirk's ACK and then go though the TI tree and then yours. Alternatively, Sandeep's ACK would be needed, too.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Documentation is the castor oil of programming. Managers know it must be good because the programmers hate it so much.
PATCH 1/1 omap3_beagle: Switch default console from ttyS2 to ttyO2
In reply to Jason KridnerQuoted 7 lines · Jason Kridner
Quoted 4 lines · Alexander Holler
Linux kernels>= 2.6.36 are using ttyOn instead ttySn for the serials on OMAPs.
Signed-off-by Alexander Holler<[email protected]>Ack.
Quoted 30 lines
Quoted 20 lines
--- include/configs/omap3_beagle.h | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)include/configs/omap3_beagle.h +1
-2@@ -189,7 +189,7 @@#define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ "usbtty=cdc_acm\0" \ - "console=ttyS2,115200n8\0" \ + "console=ttyO2,115200n8\0" \ "mpurate=500\0" \ "vram=12M\0" \ "dvimode=1024x768MR-16 at 60\0" \ --1.7.3.4
Quoted 5 lines
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot