MX53: drop config.mk from mx53evk
PATCH 1/1 MX53: drop config.mk from mx53evk
The config.mk file in board directory is now obsolete and should be removed. Add option for the IMX image into boards.cfg
--- board/freescale/mx53evk/config.mk | 24 ------------------------ boards.cfg | 2 +- 2 files changed, 1 insertions(+), 25 deletions(-)
board/freescale/mx53evk/config.mk deleted +0 -24
@@ -1,24 +0,0 @@ -# -# Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -IMX_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/imximage.cfg -ALL += $(obj)u-boot.imx
boards.cfg +1 -1
@@ -108,7 +108,7 @@ edminiv2 arm arm926ejs - LaCie ca9x4_ct_vxp arm armv7 vexpress armltd efikamx arm armv7 efikamx - mx5 mx51evk arm armv7 mx51evk freescale mx5 mx51evk:IMX_CONFIG=board/freescale/mx51evk/imximage.cfg -mx53evk arm armv7 mx53evk freescale mx5 +mx53evk arm armv7 mx53evk freescale mx5 mx53evk:IMX_CONFIG=board/freescale/mx53evk/imximage.cfg vision2 arm armv7 vision2 ttcontrol mx5 cm_t35 arm armv7 cm_t35 - omap3 omap3_overo arm armv7 overo - omap3
Signature · 1 line
1.7.0.4
PATCH v2 1/1 MX53: support for freescale MX53LOCO board
This patch add initial support for freescale MX53LOCO board. Network(FEC),SD/MMC, UART have been supported by this patch.
---
Changes for v2:
- remove config.mk, instead add CONFIG_ options in boards.cfg
- fix copyright issue, use freescale copyright.
- rebase on u-boot-imx/next branch and resend.
--- MAINTAINERS | 1 + board/freescale/mx53loco/Makefile | 47 +++++ board/freescale/mx53loco/imximage.cfg | 96 ++++++++++ board/freescale/mx53loco/mx53loco.c | 316 +++++++++++++++++++++++++++++++++ boards.cfg | 1 + include/configs/mx53loco.h | 196 ++++++++++++++++++++ 6 files changed, 657 insertions(+), 0 deletions(-)
MAINTAINERS +1 -0
@@ -566,6 +566,7 @@ Stefano Babic <[email protected]> Jason Liu <[email protected]> mx53evk i.MX53 + mx53loco i.MX53 Enric Balletbo i Serra <[email protected]>
board/freescale/mx53loco/Makefile new file +47 -0
47 lines not on this page · raw message
board/freescale/mx53loco/imximage.cfg new file +96 -0
96 lines not on this page · raw message
board/freescale/mx53loco/mx53loco.c new file +316 -0
316 lines not on this page · raw message
boards.cfg +1 -0
@@ -109,6 +109,7 @@ ca9x4_ct_vxp arm armv7 vexpress armltd efikamx arm armv7 efikamx - mx5 mx51evk arm armv7 mx51evk freescale mx5 mx51evk:IMX_CONFIG=board/freescale/mx51evk/imximage.cfg mx53evk arm armv7 mx53evk freescale mx5 mx53evk:IMX_CONFIG=board/freescale/mx53evk/imximage.cfg +mx53loco arm armv7 mx53loco freescale mx5 mx53loco:IMX_CONFIG=board/freescale/mx53loco/imximage.cfg vision2 arm armv7 vision2 ttcontrol mx5 cm_t35 arm armv7 cm_t35 - omap3 omap3_overo arm armv7 overo - omap3
include/configs/mx53loco.h new file +196 -0
196 lines not on this page · raw message
Signature · 1 line
1.7.0.4
PATCH v2 1/1 MX53: support for freescale MX53LOCO board
Hi, Stefano,
2011/2/23 Jason Liu <[email protected]>:
Quoted 11 lines
This patch add initial support for freescale MX53LOCO board. Network(FEC),SD/MMC, UART have been supported by this patch.
Signed-off-by Jason Liu <[email protected]>---
Changes for v2:
- remove config.mk, instead addCONFIG_options in boards.cfg
- fix copyright issue, use freescale copyright.
- rebase on u-boot-imx/next branch and resend.
---
ping..
Quoted 6 lines
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
PATCH v2 1/1 MX53: support for freescale MX53LOCO board
Quoted 8 lines · Jason Liu
Hi, Stefano,
2011/2/23 Jason Liu <[email protected]>:
Quoted 5 lines
This patch add initial support for freescale MX53LOCO board. Network(FEC),SD/MMC, UART have been supported by this patch.
Signed-off-by Jason Liu <[email protected]>
Quoted 8 lines
Quoted 6 lines
---
Changes for v2:
- remove config.mk, instead addCONFIG_options in boards.cfg
- fix copyright issue, use freescale copyright.
- rebase on u-boot-imx/next branch and resend.
---ping..
Hi Jason,
I had no comments about your patches, but since the window is still closed I cannot merge them into u-boot-imx (master branch) and send a pull for them. However, as I already did for other patches, I will merge your patches into the next branch of u-boot-imx, so they will be ready when the window is open again.
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================
PATCH v2 1/1 MX53: support for freescale MX53LOCO board
In reply to Jason LiuDear Jason Liu,
Quoted 4 lines · In message <[email protected]> you wrote:
This patch add initial support for freescale MX53LOCO board. Network(FEC),SD/MMC, UART have been supported by this patch.
Signed-off-by Jason Liu <[email protected]>
My review comments to v1 of this patch still apply.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de It is necessary to have purpose. -- Alice #1, "I, Mudd", stardate 4513.3
PATCH 1/1 MX53: drop config.mk from mx53evk
In reply to Jason LiuHi, Stefano,
2011/2/23 Jason Liu <[email protected]>:
Quoted 6 lines
The config.mk file in board directory is now obsolete and should be removed. Add option for the IMX image into boards.cfg
Signed-off-by Jason Liu <[email protected]>---
ping..
Quoted 6 lines
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot