Skip to contentSkip to conversation

ESE Key Daemon 1.2.4: FTBFS with gcc-4.5

DISCUSSION Luís Filipe Salé Borlido 2 participants 2 messages Apr 6, 2011 – Apr 10, 2011 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

Hi!

I was compiling a new image for mini2440 that contains esekeyd and I got an error:

NOTE: Running task 2457 of 4369 (ID: 199, /opt/OpenEmbedded/openembedded/recipes/esekeyd/esekeyd_1.2.4.bb, do_compile)
NOTE: package esekeyd-1.2.4-r0: task do_compile: Started
ERROR: Logfile of failure stored in:
/opt/OpenEmbedded/build/tmp/work/armv4t-angstrom-linux-gnueabi/esekeyd-1.2.4-r0/temp/log.do_compile.11553 Log data follows:

| + do_compile
| + base_do_compile
| + '[' -e Makefile -o -e makefile -o -e GNUmakefile ']'
| + oe_runmake
| + oenote make
| + echo NOTE: make
| NOTE: make
| + make
| make  all-recursive
| make[1]: Entering directory

`/opt/OpenEmbedded/build/tmp/work/armv4t-angstrom-linux-gnueabi/esekeyd-1.2.4-r0/esekeyd-1.2.4' | Making all in src
| make[2]: Entering directory `/opt/OpenEmbedded/build/tmp/work/armv4t-angstrom-linux-gnueabi/esekeyd-1.2.4-r0/esekeyd-1.2.4/src' | arm-angstrom-linux-gnueabi-gcc -march=armv4t -mtune=arm920t
-mthumb-interwork -mno-thumb --sysroot=/opt/OpenEmbedded/build/tmp/sysroots/armv4t-angstrom-linux-gnueabi
-DHAVE_CONFIG_H -I. -I.. -fexpensive-optimizations -fomit-frame-pointer
-frename-registers -O2 -ggdb2 -MT keytest.o -MD -MP -MF .deps/keytest.Tpo -c
-o keytest.o keytest.c
| keytest.c: In function 'main':
*| keytest.c:55:3: error: variable-sized object may not be initialized*
| make[2]: *** [keytest.o] Error 1
| make[2]: Leaving directory `/opt/OpenEmbedded/build/tmp/work/armv4t-angstrom-linux-gnueabi/esekeyd-1.2.4-r0/esekeyd-1.2.4/src' | make[1]: *** [all-recursive] Error 1
| make[1]: Leaving directory `/opt/OpenEmbedded/build/tmp/work/armv4t-angstrom-linux-gnueabi/esekeyd-1.2.4-r0/esekeyd-1.2.4'

| make: *** [all] Error 2
| + die 'oe_runmake failed'
| + oefatal 'oe_runmake failed'
| + echo FATAL: 'oe_runmake failed'
| FATAL: oe_runmake failed
| + exit 1

NOTE: package esekeyd-1.2.4-r0: task do_compile: Failed
ERROR: Function 'do_compile' failed (see /opt/OpenEmbedded/build/tmp/work/armv4t-angstrom-linux-gnueabi/esekeyd-1.2.4-r0/temp/log.do_compile.11553 for further information)
ERROR: Task 199 (/opt/OpenEmbedded/openembedded/recipes/esekeyd/
esekeyd_1.2.4.bb, do_compile) failed with exit code '1'
ERROR: '/opt/OpenEmbedded/openembedded/recipes/esekeyd/esekeyd_1.2.4.bb'
failed

In one of the Debian bug reports (
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=564981), they seem to say that the package cannot be built using gcc-4.5, which is the version of arm-angstrom-linux-gnueabi-gcc that is being used to build the package.

To solve this problem I added a recipe to esekeyd-1.2.7 (in attach) and now it's working.

Best regards,
Luís Borlido

#2 lore raw
Quoted 54 lines · Luís Filipe Salé Borlido

Hi!

I was compiling a new image for mini2440 that contains esekeyd and I got an error:

NOTE: Running task 2457 of 4369 (ID: 199, /opt/OpenEmbedded/openembedded/recipes/esekeyd/esekeyd_1.2.4.bb, do_compile)
NOTE: package esekeyd-1.2.4-r0: task do_compile: Started
ERROR: Logfile of failure stored in:
/opt/OpenEmbedded/build/tmp/work/armv4t-angstrom-linux-gnueabi/esekeyd-1.2.4-r0/temp/log.do_compile.11553 Log data follows:

| + do_compile
| + base_do_compile
| + '[' -e Makefile -o -e makefile -o -e GNUmakefile ']'
| + oe_runmake
| + oenote make
| + echo NOTE: make
| NOTE: make
| + make
| make  all-recursive
| make[1]: Entering directory

`/opt/OpenEmbedded/build/tmp/work/armv4t-angstrom-linux-gnueabi/esekeyd-1.2.4-r0/esekeyd-1.2.4' | Making all in src
| make[2]: Entering directory `/opt/OpenEmbedded/build/tmp/work/armv4t-angstrom-linux-gnueabi/esekeyd-1.2.4-r0/esekeyd-1.2.4/src' | arm-angstrom-linux-gnueabi-gcc -march=armv4t -mtune=arm920t

(quoted diff) +0 -5
-mthumb-interwork -mno-thumb
--sysroot=/opt/OpenEmbedded/build/tmp/sysroots/armv4t-angstrom-linux-gnueabi
-DHAVE_CONFIG_H -I. -I..     -fexpensive-optimizations -fomit-frame-pointer
-frename-registers -O2 -ggdb2 -MT keytest.o -MD -MP -MF .deps/keytest.Tpo -c
-o keytest.o keytest.c

| keytest.c: In function 'main':
*| keytest.c:55:3: error: variable-sized object may not be initialized*
| make[2]: *** [keytest.o] Error 1
| make[2]: Leaving directory `/opt/OpenEmbedded/build/tmp/work/armv4t-angstrom-linux-gnueabi/esekeyd-1.2.4-r0/esekeyd-1.2.4/src' | make[1]: *** [all-recursive] Error 1
| make[1]: Leaving directory `/opt/OpenEmbedded/build/tmp/work/armv4t-angstrom-linux-gnueabi/esekeyd-1.2.4-r0/esekeyd-1.2.4'

| make: *** [all] Error 2
| + die 'oe_runmake failed'
| + oefatal 'oe_runmake failed'
| + echo FATAL: 'oe_runmake failed'
| FATAL: oe_runmake failed
| + exit 1

NOTE: package esekeyd-1.2.4-r0: task do_compile: Failed
ERROR: Function 'do_compile' failed (see /opt/OpenEmbedded/build/tmp/work/armv4t-angstrom-linux-gnueabi/esekeyd-1.2.4-r0/temp/log.do_compile.11553 for further information)
ERROR: Task 199 (/opt/OpenEmbedded/openembedded/recipes/esekeyd/
esekeyd_1.2.4.bb, do_compile) failed with exit code '1'
ERROR: '/opt/OpenEmbedded/openembedded/recipes/esekeyd/esekeyd_1.2.4.bb'
failed

Quoted 8 lines

In one of the Debian bug reports (
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=564981), they seem to say that the package cannot be built using gcc-4.5, which is the version of arm-angstrom-linux-gnueabi-gcc that is being used to build the package.

To solve this problem I added a recipe to esekeyd-1.2.7 (in attach) and now it's working.

can you resend the patch following submission guidelines
http://openembedded.org/index.php/How_to_submit_a_patch_to_OpenEmbedded

Quoted 9 lines

Best regards,
Luís Borlido

_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel