arm/km: add mkimage config file for uart download
A message that is not in the archive (sent off-list or not yet received): d9847e8af657a684b3f537d7aaadbbe7a87c3452.1302266367.git.valentin.longchamp@keymile.com
PATCH 1/1 arm/km: add mkimage config file for uart download
Quoted 47 lines
-----Original Message-----
From: Valentin Longchamp [mailto:valentin.longchamp at keymile.com]
Sent: Friday, April 08, 2011 6:18 PM
To: u-boot at lists.denx.de
Cc: holger.brunck at keymile.com; hs at denx.de; Valentin Longchamp; Wolfgang Denk; Detlev Zundel; Prafulla Wadaskar
Subject: [PATCH] arm/km: add mkimage config file for uart downloadSigned-off-by Valentin Longchamp <[email protected]>Signed-off-by Holger Brunck <[email protected]>Acked-by Heiko Schocher <[email protected]>cc Wolfgang Denk <[email protected]>cc Detlev Zundel <[email protected]>cc Prafulla Wadaskar <[email protected]>--- board/keymile/km_arm/kwbimage-uart.cfg | 179 ++++++++++++++++++++++++++++++++ 1 files changed, 179 insertions(+), 0 deletions(-) create mode 100644 board/keymile/km_arm/kwbimage-uart.cfgboard/keymile/km_arm/kwbimage-uart.cfg new file +18
-0@@ -0,0 +1,179 @@ +# +# (C) Copyright 2010 +# Heiko Schocher, DENX Software Engineering, hs at denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License
board/keymile/km_arm/kwbimage-uart.cfg line 28
Quoted 10 lines
board/keymile/km_arm/kwbimage-uart.cfg new file +10
-0+# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301 USA +# +# Refer docs/README.kwimage for more details about how-to configure +# and create kirkwood boot image +# + +# Boot Media configurations +BOOT_FROM uart # Boot from SPI flash
Comments are wrong here..
I think this is more over debug support. i.e. if you want to bring up broken board with the help of UART.
Does it makes sense to mainline?
Regards..
Prafulla . .
PATCH 1/1 arm/km: add mkimage config file for uart download
Quoted 51 lines · Prafulla Wadaskar
Quoted 51 lines
-----Original Message-----
From: Valentin Longchamp [mailto:valentin.longchamp at keymile.com]
Sent: Friday, April 08, 2011 6:18 PM
To: u-boot at lists.denx.de
Cc: holger.brunck at keymile.com; hs at denx.de; Valentin Longchamp; Wolfgang Denk; Detlev Zundel; Prafulla Wadaskar
Subject: [PATCH] arm/km: add mkimage config file for uart downloadSigned-off-by Valentin Longchamp <[email protected]>Signed-off-by Holger Brunck <[email protected]>Acked-by Heiko Schocher <[email protected]>cc Wolfgang Denk <[email protected]>cc Detlev Zundel <[email protected]>cc Prafulla Wadaskar <[email protected]>--- board/keymile/km_arm/kwbimage-uart.cfg | 179 ++++++++++++++++++++++++++++++++ 1 files changed, 179 insertions(+), 0 deletions(-) create mode 100644 board/keymile/km_arm/kwbimage-uart.cfgboard/keymile/km_arm/kwbimage-uart.cfg new file +23
-0@@ -0,0 +1,179 @@ +# +# (C) Copyright 2010 +# Heiko Schocher, DENX Software Engineering, hs at denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301 USA +# +# Refer docs/README.kwimage for more details about how-to configure
Quoted 8 lines
board/keymile/km_arm/kwbimage-uart.cfg line 28
Quoted 5 lines
board/keymile/km_arm/kwbimage-uart.cfg new file +5
-0+# and create kirkwood boot image +# + +# Boot Media configurations +BOOT_FROM uart # Boot from SPI flashComments are wrong here..
I think this is more over debug support. i.e. if you want to bring up broken board with the help of UART.
You are right, the comment definitely is wrong here. I will fix this (it is the same in the memphis SDRAM patch).
Quoted 3 lines
Does it makes sense to mainline?
We indeed use it for development and debug support. What is your usual policy about such config files for marvell boards and u-boot mainlining ? We will stick to it as well.
Signature · 13 lines
Valentin Longchamp Embedded Software Engineer Hardware and Chip Integration ______________________________________ KEYMILE AG Schwarzenburgstr. 73 CH-3097 Liebefeld Phone +41 31 377 1318 Fax +41 31 377 1212 valentin.longchamp at keymile.com www.keymile.com ______________________________________ KEYMILE: A Specialist as a Partner