Control over when package init scripts are run

PATCH In review Gary Thomas 2 participants 2 messages Apr 18, 2011 – Apr 25, 2011

Share & tools

Gary Thomas

author

2011-04-18 14:23 UTC #0 lore raw

PATCH v2 1/1 Control over when package init scripts are run

When a package is built, some installation scripts must be performed on the target. In the case of a complete image, these scripts are run by a separate step at init time, but only during the first boot (other package install scripts can just be run when the package is installed on the target).

This patch lets the distribution (or user) decide when these postponed install scripts should run. The default is normally near the end of init, but there may be times when it's beneficial to run them earlier so the "when" can be overridden.

Signature · 4 lines

------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------

From c0996c57cd3a6c87e277272058057b7d2212038a Mon Sep 17 00:00:00 2001
From: Gary Thomas <[email protected]>
Date: Mon, 18 Apr 2011 08:17:26 -0600
Subject: [PATCH] Control over when package init scripts are run

Signed-off-by Gary Thomas <[email protected]>

---
 meta/classes/rootfs_rpm.bbclass          |   11 ++++++++---
 meta/recipes-devtools/opkg/opkg.inc      |    4 ++++
 meta/recipes-devtools/opkg/opkg_0.1.8.bb |   13 ++++---------
 meta/recipes-devtools/opkg/opkg_svn.bb   |   13 ++++---------
 4 files changed, 20 insertions(+), 21 deletions(-)

meta/classes/rootfs_rpm.bbclass +8 -3

index 04ccabd..887b894 100644
@@ -26,6 +26,11 @@ RPM_POSTPROCESS_COMMANDS = ""
 #
 #IMAGE_LOCALES="en-gb"
 
+# 
+# Allow distributions to alter when [postponed] package install scripts are run
+#
+POSTINSTALL_INITPOSITION ?= "98"
+
 rpmlibdir = "/var/lib/rpm"
 opkglibdir = "${localstatedir}/lib/opkg"

@@ -116,7 +121,7 @@ EOF
 	install -d ${IMAGE_ROOTFS}/${sysconfdir}/rcS.d
 	# Stop $i getting expanded below...
 	i=\$i
-	cat > ${IMAGE_ROOTFS}${sysconfdir}/rcS.d/S98configure << EOF
+	cat > ${IMAGE_ROOTFS}${sysconfdir}/rcS.d/S${POSTINSTALL_INITPOSITION}configure << EOF
 #!/bin/sh
 for i in /etc/rpm-postinsts/*.sh; do
 	echo "Running postinst $i..."

@@ -127,9 +132,9 @@ for i in /etc/rpm-postinsts/*.sh; do
 		echo "ERROR: postinst $i failed."
 	fi
 done
-rm -f ${sysconfdir}/rcS.d/S98configure
+rm -f ${sysconfdir}/rcS.d/S${POSTINSTALL_INITPOSITION}configure
 EOF
-	chmod 0755 ${IMAGE_ROOTFS}${sysconfdir}/rcS.d/S98configure
+	chmod 0755 ${IMAGE_ROOTFS}${sysconfdir}/rcS.d/S${POSTINSTALL_INITPOSITION}configure
 
 	install -d ${IMAGE_ROOTFS}/${sysconfdir}
 	echo ${BUILDNAME} > ${IMAGE_ROOTFS}/${sysconfdir}/version

meta/recipes-devtools/opkg/opkg.inc +4 -0

index c317491..50f1afc 100644
@@ -34,3 +34,7 @@ BBCLASSEXTEND = "native nativesdk"
 
 PKGSUFFIX = ""
 PKGSUFFIX_virtclass-nativesdk = "-nativesdk"
+
+# Define a variable to allow distros to run configure earlier.
+# (for example, to enable loading of ethernet kernel modules before networking starts)
+POSTINSTALL_INITPOSITION ?= "98"

meta/recipes-devtools/opkg/opkg_0.1.8.bb +4 -9

index 6815474..18cf042 100644
@@ -13,7 +13,7 @@ SRC_URI = "http://opkg.googlecode.com/files/opkg-${PV}.tar.gz \
            file://headerfix.patch \
 "
 
-PR = "r3"
+PR = "r4"
 
 PACKAGES =+ "libopkg${PKGSUFFIX}-dev libopkg${PKGSUFFIX} update-alternatives-cworth${PKGSUFFIX}"

@@ -26,11 +26,6 @@ do_install_append() {
 	install -d ${D}${localstatedir}/lib/opkg
 }
 
-# Define a variable to allow distros to run configure earlier.
-# (for example, to enable loading of ethernet kernel modules before networking starts)
-OPKG_INIT_POSITION = "98"
-OPKG_INIT_POSITION_slugos = "41"
-
 pkg_postinst_${PN} () {
 #!/bin/sh
 if [ "x$D" != "x" ]; then

@@ -38,9 +33,9 @@ if [ "x$D" != "x" ]; then
 	# this happens at S98 where our good 'ole packages script used to run
 	echo "#!/bin/sh
 opkg-cl configure
-rm -f /${sysconfdir}/rcS.d/S${OPKG_INIT_POSITION}configure
-" > $D${sysconfdir}/rcS.d/S${OPKG_INIT_POSITION}configure
-	chmod 0755 $D${sysconfdir}/rcS.d/S${OPKG_INIT_POSITION}configure
+rm -f /${sysconfdir}/rcS.d/S${POSTINSTALL_INITPOSITION}configure
+" > $D${sysconfdir}/rcS.d/S${POSTINSTALL_INITPOSITION}configure
+	chmod 0755 $D${sysconfdir}/rcS.d/S${POSTINSTALL_INITPOSITION}configure
 fi
 
 update-alternatives --install ${bindir}/opkg opkg ${bindir}/opkg-cl 100

meta/recipes-devtools/opkg/opkg_svn.bb +4 -9

index 76ec838..d8af823 100644
@@ -16,7 +16,7 @@ SRC_URI = "svn://opkg.googlecode.com/svn;module=trunk;proto=http \
 S = "${WORKDIR}/trunk"
 
 PV = "0.1.8+svnr${SRCPV}"
-PR = "r1"
+PR = "r2"
 
 PACKAGES =+ "libopkg${PKGSUFFIX}-dev libopkg${PKGSUFFIX} update-alternatives-cworth${PKGSUFFIX}"

@@ -29,11 +29,6 @@ do_install_append() {
 	install -d ${D}${localstatedir}/lib/opkg
 }
 
-# Define a variable to allow distros to run configure earlier.
-# (for example, to enable loading of ethernet kernel modules before networking starts)
-OPKG_INIT_POSITION = "98"
-OPKG_INIT_POSITION_slugos = "41"
-
 pkg_postinst_${PN} () {
 #!/bin/sh
 if [ "x$D" != "x" ]; then

@@ -41,9 +36,9 @@ if [ "x$D" != "x" ]; then
 	# this happens at S98 where our good 'ole packages script used to run
 	echo "#!/bin/sh
 opkg-cl configure
-rm -f /${sysconfdir}/rcS.d/S${OPKG_INIT_POSITION}configure
-" > $D${sysconfdir}/rcS.d/S${OPKG_INIT_POSITION}configure
-	chmod 0755 $D${sysconfdir}/rcS.d/S${OPKG_INIT_POSITION}configure
+rm -f /${sysconfdir}/rcS.d/S${POSTINSTALL_INITPOSITION}configure
+" > $D${sysconfdir}/rcS.d/S${POSTINSTALL_INITPOSITION}configure
+	chmod 0755 $D${sysconfdir}/rcS.d/S${POSTINSTALL_INITPOSITION}configure
 fi
 
 update-alternatives --install ${bindir}/opkg opkg ${bindir}/opkg-cl 100

Signature · 1 line

1.7.3.4

Saul Wold

2011-04-25 05:04 UTC #1 lore raw

Quoted 13 lines · Gary Thomas

When a package is built, some installation scripts must be performed on the target. In the case of a complete image, these scripts are run by a separate step at init time, but only during the first boot (other package install scripts can just be run when the package is installed on the target).
This patch lets the distribution (or user) decide when these postponed install scripts should run. The default is normally near the end of init, but there may be times when it's beneficial to run them earlier so the "when" can be overridden.

Quoted 4 lines

_______________________________________________
poky mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/poky

Pulled into oe-core and poky/master

Thanks
Sau!