Fixes stb0899 not locking

Fixes stb0899 not locking.

See http://www.spinics.net/lists/linux-media/msg30486.html ...

When stb0899_check_data is entered, it could happen, that the data is already locked and the data search looped. stb0899_check_data fails to lock on a good frequency. stb0899_search_data uses an extrem big search step and fails to lock.

The new code checks for lock before starting a new search. The first read ignores the loop bit, for the case that the loop bit is set during the search setup. I also added the msleep to reduce the traffic on the i2c bus.

Johns

Signed-off-by Lutz Sammer <johns98 <at> gmx.net>

drivers/media/dvb/frontends/stb0899_algo.c +4 -19

index 2da55ec..55f0c4e 100644
@@ -338,36 +338,42 @@ static enum stb0899_status
 stb0899_check_data(struct stb0899_state *state)
        int lock = 0, index = 0, dataTime = 500, loop;
        u8 reg;
 
-       internal->status = NODATA;
+       reg = stb0899_read_reg(state, STB0899_VSTATUS);
+       lock = STB0899_GETFIELD(VSTATUS_LOCKEDVIT, reg);
+       if ( !lock ) {
 
-       /* RESET FEC    */
-       reg = stb0899_read_reg(state, STB0899_TSTRES);
-       STB0899_SETFIELD_VAL(FRESACS, reg, 1);
-       stb0899_write_reg(state, STB0899_TSTRES, reg);
-       msleep(1);
-       reg = stb0899_read_reg(state, STB0899_TSTRES);
-       STB0899_SETFIELD_VAL(FRESACS, reg, 0);
-       stb0899_write_reg(state, STB0899_TSTRES, reg);
+               internal->status = NODATA;
 
-       if (params->srate <= 2000000)
-               dataTime = 2000;
-       else if (params->srate <= 5000000)
-               dataTime = 1500;
-       else if (params->srate <= 15000000)
-               dataTime = 1000;
-       else
-               dataTime = 500;
-
-       stb0899_write_reg(state, STB0899_DSTATUS2, 0x00); /* force

search loop */

drivers/media/dvb/frontends/stb0899_algo.c +0 -2

-       while (1) {
-               /* WARNING! VIT LOCKED has to be tested before

VIT_END_LOOOP */

drivers/media/dvb/frontends/stb0899_algo.c +7 -3

-               reg = stb0899_read_reg(state, STB0899_VSTATUS);
-               lock = STB0899_GETFIELD(VSTATUS_LOCKEDVIT, reg);
-               loop = STB0899_GETFIELD(VSTATUS_END_LOOPVIT, reg);
+               /* RESET FEC    */
+               reg = stb0899_read_reg(state, STB0899_TSTRES);
+               STB0899_SETFIELD_VAL(FRESACS, reg, 1);
+               stb0899_write_reg(state, STB0899_TSTRES, reg);
+               msleep(1);
+               reg = stb0899_read_reg(state, STB0899_TSTRES);
+               STB0899_SETFIELD_VAL(FRESACS, reg, 0);