tsec: Fix MDIO on devices with eTSEC2
PATCH 1/1 tsec: Fix MDIO on devices with eTSEC2
The tsec driver was defining the default MDIO address as the TSEC_BASE + 0x520, but on eTSEC2 controllers, the first TSEC's registers are separated from the MDIO registers. Use the existing MDIO_BASE_ADDR, instead.
--- include/tsec.h | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
include/tsec.h +1 -1
@@ -25,7 +25,7 @@#define TSEC_SIZE 0x01000#define TSEC_MDIO_OFFSET 0x01000 -#define CONFIG_SYS_MDIO_BASE_ADDR (TSEC_BASE_ADDR + 0x520) +#define CONFIG_SYS_MDIO_BASE_ADDR (MDIO_BASE_ADDR + 0x520)#define DEFAULT_MII_NAME "FSL_MDIO"
Signature · 1 line
1.6.5.2.g6ff9a
Kumar Gala
AppliedPATCH 1/1 tsec: Fix MDIO on devices with eTSEC2
Quoted 9 lines · Andy Fleming
The tsec driver was defining the default MDIO address as the
TSEC_BASE+0x520, but on eTSEC2 controllers, the first TSEC's registers are separated from the MDIO registers. Use the existingMDIO_BASE_ADDR, instead.Signed-off-by Andy Fleming <[email protected]>---
include/tsec.h| 2 +-1 files changed, 1 insertions(+), 1 deletions(-)
applied to 85xx
- k
PATCH 1/1 tsec: Fix MDIO on devices with eTSEC2
In reply to Andy FlemingQuoted 6 lines · Andy Fleming
The tsec driver was defining the default MDIO address as the
TSEC_BASE+0x520, but on eTSEC2 controllers, the first TSEC's registers are separated from the MDIO registers. Use the existingMDIO_BASE_ADDR, instead.Signed-off-by Andy Fleming <[email protected]>
This fixes Ethernet on the P1022DS.
Signature · 2 lines
Timur Tabi Linux kernel developer at Freescale