Skip to contentSkip to conversation

arduino IDE on beagleboard

DISCUSSION Robert Schuster 2 participants 4 messages May 3, 2011

lore
Share & tools
lore
#0 lore raw

Hi,
on scap.linuxtogo.org I found a screenshot of someone using the arduino IDE on a beagleboard:
http://scap.linuxtogo.org/files/422bf4ad3de13dccfd2bcd19253e9ab5.png

If this person is here on this list (or someone else tried this too), I have a question: Did this work nicely? Could you upload programs to the arduino and receive stuff through the serial port?

(The background is that this would be a perfect candidate for a conference demo.)

Regards,
Robert

#1 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 6 lines · Robert Schuster

Hi,
on scap.linuxtogo.org I found a screenshot of someone using the arduino IDE on a beagleboard:
http://scap.linuxtogo.org/files/422bf4ad3de13dccfd2bcd19253e9ab5.png

If this person is here on this list

I am :)

Quoted 2 lines

(or someone else tried this too), I
have a question: Did this work nicely?

First you have to fix the included rxtx install:
http://dominion.thruhere.net/koen/cms/making-processing-arduino-ide-replicaorg-work-on-arm

Quoted 2 lines

Could you upload programs to the
arduino and receive stuff through the serial port?

That works, and if you download and untar:

http://dominion.thruhere.net/koen/angstrom/beagleboard/avr-binutils-2.21.tar.bz2
http://dominion.thruhere.net/koen/angstrom/beagleboard/avr-gcc-4.5.2.tar.bz2
http://dominion.thruhere.net/koen/angstrom/beagleboard/avr-libc-1.7.1.tar.bz2

You can even compile the included examples. I succesfully compiled and uploaded the serial test app to the
http://elinux.org/BeagleBoard_Trainer expansionboard attached to my xM. I haven't tried using it on a proper arduino board yet, but that uses the same bootloader as the trainer.

regards,

Koen
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)

iD8DBQFNv+O3MkyGM64RGpERAsSTAJkBerPIaFUJQZmYxEKAPsx3lE9VogCgjnbp eiBbe3p4HbqJtx6Nu5iIKMU=
=J3yG
-----END PGP SIGNATURE-----

#2 lore raw

Hi,

Am 03.05.2011 13:15, schrieb Koen Kooi:

Quoted 2 lines

First you have to fix the included rxtx install:
http://dominion.thruhere.net/koen/cms/making-processing-arduino-ide-replicaorg-work-on-arm

Yep, same story as on an amd64 machine. :)

Quoted 8 lines
Quoted 2 lines

Could you upload programs to the
arduino and receive stuff through the serial port?

That works, and if you download and untar:

http://dominion.thruhere.net/koen/angstrom/beagleboard/avr-binutils-2.21.tar.bz2
http://dominion.thruhere.net/koen/angstrom/beagleboard/avr-gcc-4.5.2.tar.bz2
http://dominion.thruhere.net/koen/angstrom/beagleboard/avr-libc-1.7.1.tar.bz2

How did you build those? Directly on a BB using gcc? I looked into making recipes for OE for this
but my toolchain-foo is way to small for this.

Quoted 5 lines

You can even compile the included examples. I succesfully compiled and uploaded the serial test app to the
http://elinux.org/BeagleBoard_Trainer expansionboard attached to my xM. I haven't tried using it on a proper arduino board yet, but that uses the same bootloader as the trainer.

Great! Then I think this is going to work without problems!

Thanks for trying this out. So I am going to take a BB/PB to LinuxTag along with an arduino starterkit ... :)

Regards,
Robert

_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

#3 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 10 lines · Robert Schuster

Hi,

Am 03.05.2011 13:15, schrieb Koen Kooi:

Quoted 2 lines

First you have to fix the included rxtx install:
http://dominion.thruhere.net/koen/cms/making-processing-arduino-ide-replicaorg-work-on-arm

Yep, same story as on an amd64 machine. :)

Quoted 3 lines
Quoted 2 lines

Could you upload programs to the
arduino and receive stuff through the serial port?

Quoted 8 lines
Quoted 5 lines

That works, and if you download and untar:

http://dominion.thruhere.net/koen/angstrom/beagleboard/avr-binutils-2.21.tar.bz2
http://dominion.thruhere.net/koen/angstrom/beagleboard/avr-gcc-4.5.2.tar.bz2
http://dominion.thruhere.net/koen/angstrom/beagleboard/avr-libc-1.7.1.tar.bz2

How did you build those? Directly on a BB using gcc? I looked into making recipes for OE for this
but my toolchain-foo is way to small for this.

I built those natively on my beagle, that was faster than figuring out canadian cross in OE :)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)

iD8DBQFNwBFnMkyGM64RGpERAq47AKCWLZ3hCjVSlM/3vMn1Amc+INd/KgCfTcJP fv7h7p3wQKIsEPxvk8xSFGI=
=yiNr
-----END PGP SIGNATURE-----