mypaint: new recipe for version 0.9.1
Paul,
I've an additional question regarding build configuration :
Quoted 10 lines · Eric Bénard
Hi Paul,
Quoted 3 lines · Paul Menzel
Please remember to add what build configuration you used. (You can just paste it from the BitBake output.)
You asked this several times on the list but this part is not in the commit log policy :
http://wiki.openembedded.org/index.php/Commit_log_example
[...]
how must build configuration described : which information to add, where, and how do I get it from bitbake output ?
Can you give me an example ?
For your information, my machine is derived from beagleboard (very few differences), and my distribution is derived from angstrom, because I'm building a complete distribution, not using a standard one.
Thanks.
Christian.
begin:vcard
fn:Christian Charreyre n:Charreyre;Christian
org:CIO Informatique Industrielle adr;dom:;;11 Avenue Marigny;Marseille;;13014 email;internet:[email protected] tel;work:04 95 05 19 41 url:http://www.cioinfoindus.fr
version:2.1
end:vcard
Dear Christian,
Am Donnerstag, den 05.05.2011, 17:44 +0200 schrieb Christian Charreyre:
Quoted 14 lines
I've an additional question regarding build configuration :
Quoted 7 lines · Eric Bénard
Quoted 3 lines · Paul Menzel
Please remember to add what build configuration you used. (You can just paste it from the BitBake output.)
You asked this several times on the list but this part is not in the commit log policy :
http://wiki.openembedded.org/index.php/Commit_log_example[...]
Quoted 7 lines
how must build configuration described : which information to add, where, and how do I get it from bitbake output ?
Can you give me an example ?
For your information, my machine is derived from beagleboard (very few differences),
Great.
Quoted 2 lines
and my distribution is derived from angstrom, because I'm building a complete distribution, not using a standard one.
I guess that information would be enough.
I would think that the following printed by bitbake mypaint would be enough. Maybe add the OE repository revision your distribution is based on.
Build Configuration:
BB_VERSION = "1.12.0"
METADATA_BRANCH = "73593c5"
METADATA_REVISION = "7f22ddc"
TARGET_ARCH = "arm"
TARGET_OS = "linux-gnueabi"
MACHINE = "beagleboard"
DISTRO = "angstrom"
DISTRO_VERSION = "v20110505"
TARGET_FPU = "hard"
Thanks,
Paul
Dear Paul,
Le 05/05/2011 20:58, Paul Menzel a écrit :
[...]
Quoted 6 lines
I guess that information would be enough.
I would think that the following printed by
bitbake mypaintwould be enough. Maybe add the OE repository revision your distribution is based on.
Quoted 11 lines
Build Configuration:
BB_VERSION= "1.12.0"
METADATA_BRANCH= "73593c5"
METADATA_REVISION= "7f22ddc"
TARGET_ARCH= "arm"
TARGET_OS= "linux-gnueabi"
MACHINE = "beagleboard"
DISTRO = "angstrom"
DISTRO_VERSION= "v20110505"
TARGET_FPU= "hard"
I'm using bitbake 1.8, that's the reason why these informations are not printed when I execute the recipe. Can I safely swap to bitbake 1.12.0 with recipes and classes quite old in my workspace ? Thanks for your advise on this point.
begin:vcard
fn:Christian Charreyre n:Charreyre;Christian
org:CIO Informatique Industrielle adr;dom:;;11 Avenue Marigny;Marseille;;13014 email;internet:[email protected] tel;work:04 95 05 19 41 url:http://www.cioinfoindus.fr
version:2.1
end:vcard
Dear Christian,
Am Freitag, den 06.05.2011, 23:18 +0200 schrieb Christian Charreyre:
Quoted 22 lines · Paul Menzel
[...]
Quoted 6 lines
I guess that information would be enough.
I would think that the following printed by
bitbake mypaintwould be enough. Maybe add the OE repository revision your distribution is based on.Quoted 10 lines
Build Configuration:
BB_VERSION= "1.12.0"
METADATA_BRANCH= "73593c5"
METADATA_REVISION= "7f22ddc"
TARGET_ARCH= "arm"
TARGET_OS= "linux-gnueabi"
MACHINE = "beagleboard"
DISTRO = "angstrom"
DISTRO_VERSION= "v20110505"
TARGET_FPU= "hard"
Quoted 2 lines
I'm using bitbake 1.8, that's the reason why these informations are not printed when I execute the recipe.
I see.
Quoted 3 lines
Can I safely swap to bitbake 1.12.0 with recipes and classes quite old in my workspace ?
Thanks for your advise on this point.
I am considering myself not knowledgeable enough to give any advises. I can only say that I did not experience any problems switching to BitBake 1.12.0. I guess you just have to try. If you experienced any problems you should open a new thread though.
Thanks,
Paul