Help U-boot Ralink
Hello,
I tried to compile U-boot to Ralink RT2880, but shows this error:
[: 1: Illegal number:
dirname: operando extra `-gdwarf-2'
Experimente "dirname --help" para mais informa????es.
make -C dirname lib_generic/libgeneric.a
make[1]: Entrando no diret??rio /Ralink/sdk3301/Uboot/lib_generic' make[1]: *** Sem regra para processar o alvo /home/sdk3301/Uboot/include/common.h', necess??rio por crc32.o'. Pare. make[1]: Saindo do diret??rio /Ralink/sdk3301/Uboot/lib_generic'
make: ** [lib_generic/libgeneric.a] Erro 2
What's going on?
Thank's
Signature · 10 lines
Atenciosamente, William Schnoremberger Dorneles Suporte T?cnico / RMA MSN: suporte at oiw.com.br Fone: 51 3653-6800 DDR: 51 3653-6807 OIW Telecom Solutions www.oiw.com.br | www.oiwtech.com
Dear "William S. Dorneles - OIW Telecom Solutions",
Quoted 2 lines · In message <[email protected]> you wrote:
I tried to compile U-boot to Ralink RT2880, but shows this error:
Seems this board is not supported in mainline.
Quoted 11 lines
[: 1: Illegal number:
dirname: operando extra `-gdwarf-2'
Experimente "dirname --help" para mais informa??es.
make -Cdirname lib_generic/libgeneric.a
make[1]: Entrando no diret?rio/Ralink/sdk3301/Uboot/lib_generic' make[1]: *** Sem regra para processar o alvo >/home/sdk3301/Uboot/include/common.h', necess?rio porcrc32.o'. Par> e. make[1]: Saindo do diret?rio/Ralink/sdk3301/Uboot/lib_generic'
make: ** [lib_generic/libgeneric.a] Erro 2What's going on?
Are you working with some out of tree port? If so, then please contact the makers of this port and ask them for help. We cannot help you - we have no idea what your code might look like.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "If a computer can't directly address all the RAM you can use, it's just a toy." - anonymous comp.sys.amiga posting, non-sequitir