AT91: soc init factorisation and fix

index 47d99a4..a67143a 100644
@@ -18,6 +18,7 @@
 #include <mach/at91rm9200.h>
 #include <mach/at91_pmc.h>
 #include <mach/at91_st.h>
+#include <mach/cpu.h>
 
 #include "generic.h"
 #include "clock.h"

@@ -316,6 +317,13 @@ static void at91rm9200_reset(void)
 	at91_sys_write(AT91_ST_CR, AT91_ST_WDRST);
 }
 
+int rm9200_type;
+EXPORT_SYMBOL(rm9200_type);
+
+void __init at91rm9200_set_type(int type)
+{
+	rm9200_type = type;
+}
 
 /* --------------------------------------------------------------------
  *  AT91RM9200 processor initialization

@@ -326,7 +334,7 @@ void __init at91rm9200_map_io(void)
 	iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc));
 }
 
-void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks)
+void __init at91rm9200_initialize(unsigned long main_clock)
 {
 	at91_arch_reset = at91rm9200_reset;
 	at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)

@@ -341,7 +349,8 @@ void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks
 	at91rm9200_register_clocks();
 
 	/* Initialize GPIO subsystem */
-	at91_gpio_init(at91rm9200_gpio, banks);
+	at91_gpio_init(at91rm9200_gpio,
+		cpu_is_at91rm9200_bga() ? AT91RM9200_BGA : AT91RM9200_PQFP);
 }
 
 

index 73372ca..ab1d463 100644
@@ -35,14 +35,18 @@
 
 #include <mach/board.h>
 #include <mach/gpio.h>
+#include <mach/cpu.h>
 
 #include "generic.h"
 
 
 static void __init onearm_init_early(void)
 {
+	/* Set cpu type: PQFP */
+	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
+
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+	at91rm9200_initialize(18432000);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

index 3929b11..f36b186 100644
@@ -43,7 +43,7 @@
 static void __init carmeva_init_early(void)
 {
 	/* Initialize processor: 20.000 MHz crystal */
-	at91rm9200_initialize(20000000, AT91RM9200_BGA);
+	at91rm9200_initialize(20000000);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

index 620a36a..6daabe3 100644
@@ -38,6 +38,7 @@
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91rm9200_mc.h>
+#include <mach/cpu.h>
 
 #include "generic.h"
 

@@ -52,8 +53,11 @@ static struct gpio_led cpuat91_leds[] = {
 
 static void __init cpuat91_init_early(void)
 {
+	/* Set cpu type: PQFP */
+	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
+
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+	at91rm9200_initialize(18432000);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

index a7be81e..d98bcec 100644
@@ -46,7 +46,7 @@
 static void __init csb337_init_early(void)
 {
 	/* Initialize processor: 3.6864 MHz crystal */
-	at91rm9200_initialize(3686400, AT91RM9200_BGA);
+	at91rm9200_initialize(3686400);
 
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);

index 58a80c3..019aab4 100644
@@ -43,7 +43,7 @@
 static void __init csb637_init_early(void)
 {
 	/* Initialize processor: 3.6864 MHz crystal */
-	at91rm9200_initialize(3686400, AT91RM9200_BGA);
+	at91rm9200_initialize(3686400);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

index e9fff80..e948453 100644
@@ -43,7 +43,7 @@
 static void __init eb9200_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000, AT91RM9200_BGA);
+	at91rm9200_initialize(18432000);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

index eea65ea..a6f57fa 100644
@@ -38,14 +38,18 @@
 
 #include <mach/board.h>
 #include <mach/gpio.h>
+#include <mach/cpu.h>
 
 #include "generic.h"
 
 
 static void __init ecb_at91init_early(void)
 {
+	/* Set cpu type: PQFP */
+	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
+
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+	at91rm9200_initialize(18432000);
 
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);

index 90a44e5..bfc0062 100644
@@ -26,11 +26,16 @@
 
 #include <mach/board.h>
 #include <mach/at91rm9200_mc.h>
+#include <mach/cpu.h>
+
 #include "generic.h"
 
 static void __init eco920_init_early(void)
 {
-	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+	/* Set cpu type: PQFP */
+	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
+
+	at91rm9200_initialize(18432000);
 
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);

index 4f17a1c..9b003ff 100644
@@ -35,14 +35,18 @@
 
 #include <mach/board.h>
 #include <mach/gpio.h>
+#include <mach/cpu.h>
 
 #include "generic.h"
 
 
 static void __init kafa_init_early(void)
 {
+	/* Set cpu type: PQFP */
+	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
+
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+	at91rm9200_initialize(18432000);
 
 	/* Set up the LEDs */
 	at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);

index 39247fa..a813a74 100644
@@ -36,7 +36,7 @@
 
 #include <mach/board.h>
 #include <mach/gpio.h>
-
+#include <mach/cpu.h>
 #include <mach/at91rm9200_mc.h>
 
 #include "generic.h"

@@ -44,8 +44,11 @@
 
 static void __init kb9202_init_early(void)
 {
+	/* Set cpu type: PQFP */
+	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
+
 	/* Initialize processor: 10 MHz crystal */
-	at91rm9200_initialize(10000000, AT91RM9200_PQFP);
+	at91rm9200_initialize(10000000);
 
 	/* Set up the LEDs */
 	at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);

index 8294eae..756cc2a 100644
@@ -46,7 +46,7 @@
 static void __init picotux200_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000, AT91RM9200_BGA);
+	at91rm9200_initialize(18432000);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

index b90d0f9..aef9627 100644
@@ -48,7 +48,7 @@
 static void __init dk_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000, AT91RM9200_BGA);
+	at91rm9200_initialize(18432000);
 
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);

index 51c2668..015a021 100644
@@ -48,7 +48,7 @@
 static void __init ek_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000, AT91RM9200_BGA);
+	at91rm9200_initialize(18432000);
 
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);

index 167337f..c208cc3 100644
@@ -45,14 +45,18 @@
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91rm9200_mc.h>
+#include <mach/cpu.h>
 
 #include "generic.h"
 
 
 static void __init yl9200_init_early(void)
 {
+	/* Set cpu type: PQFP */
+	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
+
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+	at91rm9200_initialize(18432000);
 
 	/* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
 	at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);

index 109f13e..46721996 100644
@@ -22,7 +22,8 @@ extern void __init at91cap9_map_io(void);
 extern void __init at572d940hf_map_io(void);
 
  /* Processors */
-extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks);
+extern void __init at91rm9200_set_type(int type);
+extern void __init at91rm9200_initialize(unsigned long main_clock);
 extern void __init at91sam9260_initialize(unsigned long main_clock);
 extern void __init at91sam9261_initialize(unsigned long main_clock);
 extern void __init at91sam9263_initialize(unsigned long main_clock);

index 0700f21..ab00372 100644
@@ -90,9 +90,16 @@ static inline unsigned long at91cap9_rev_identify(void)
 #endif
 
 #ifdef CONFIG_ARCH_AT91RM9200
+extern int rm9200_type;
+#define ARCH_REVISON_9200_BGA	(0 << 0)
+#define ARCH_REVISON_9200_PQFP	(1 << 0)
 #define cpu_is_at91rm9200()	(at91_cpu_identify() == ARCH_ID_AT91RM9200)
+#define cpu_is_at91rm9200_bga()	(!cpu_is_at91rm9200_pqfp())
+#define cpu_is_at91rm9200_pqfp() (cpu_is_at91rm9200() && rm9200_type & ARCH_REVISON_9200_PQFP)
 #else
 #define cpu_is_at91rm9200()	(0)
+#define cpu_is_at91rm9200_bga()	(0)
+#define cpu_is_at91rm9200_pqfp() (0)
 #endif
 
 #ifdef CONFIG_ARCH_AT91SAM9260

index 5c6af40..1b5b320 100644
@@ -31,16 +31,12 @@
 #include <mach/at91_pmc.h>
 #include <mach/at91_rstc.h>
 
+#include "soc.h"
 #include "generic.h"
 #include "clock.h"
 
-static struct map_desc at572d940hf_io_desc[] __initdata = {
+static struct map_desc at572d940hf_sram_desc[] __initdata = {
 	{
-		.virtual	= AT91_VA_BASE_SYS,
-		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
 		.virtual	= AT91_IO_VIRT_BASE - AT572D940HF_SRAM_SIZE,
 		.pfn		= __phys_to_pfn(AT572D940HF_SRAM_BASE),
 		.length		= AT572D940HF_SRAM_SIZE,

@@ -366,13 +362,12 @@ static void at572d940hf_reset(void)
  *  AT572D940HF processor initialization
  * -------------------------------------------------------------------- */
 
-void __init at572d940hf_map_io(void)
+static void __init at572d940hf_map_io(void)
 {
-	/* Map peripherals */
-	iotable_init(at572d940hf_io_desc, ARRAY_SIZE(at572d940hf_io_desc));
+	iotable_init(at572d940hf_sram_desc, ARRAY_SIZE(at572d940hf_sram_desc));
 }
 
-void __init at572d940hf_initialize(unsigned long main_clock)
+static void __init at572d940hf_initialize(unsigned long main_clock)
 {
 	at91_arch_reset = at572d940hf_reset;
 	at91_extern_irq = (1 << AT572D940HF_ID_IRQ0) | (1 << AT572D940HF_ID_IRQ1)

@@ -442,3 +437,7 @@ void __init at572d940hf_init_interrupts(unsigned int priority[NR_AIC_IRQS])
 	at91_gpio_irq_setup();
 }
 
+struct at91_soc __initdata at572d940hf_soc = {
+	.map_io = at572d940hf_map_io,
+	.init = at572d940hf_initialize,
+};

index 794e036..cc32ac8 100644
@@ -25,16 +25,12 @@
 #include <mach/at91_rstc.h>
 #include <mach/at91_shdwc.h>
 
+#include "soc.h"
 #include "generic.h"
 #include "clock.h"
 
-static struct map_desc at91cap9_io_desc[] __initdata = {
+static struct map_desc at91cap9_sram_desc[] __initdata = {
 	{
-		.virtual	= AT91_VA_BASE_SYS,
-		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
 		.virtual	= AT91_IO_VIRT_BASE - AT91CAP9_SRAM_SIZE,
 		.pfn		= __phys_to_pfn(AT91CAP9_SRAM_BASE),
 		.length		= AT91CAP9_SRAM_SIZE,

@@ -361,14 +357,12 @@ static void at91cap9_poweroff(void)
  *  AT91CAP9 processor initialization
  * -------------------------------------------------------------------- */
 
-void __init at91cap9_map_io(void)
+static void __init at91cap9_map_io(void)
 {
-	/* Map peripherals */
-	iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc));
+	iotable_init(at91cap9_sram_desc, ARRAY_SIZE(at91cap9_sram_desc));
 }
 
-void __init at91cap9_initialize(unsigned long main_clock)
-{
+static void __init at91cap9_initialize(unsigned long main_clock)
 	at91_arch_reset = at91cap9_reset;
 	pm_power_off = at91cap9_poweroff;
 	at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);

@@ -442,3 +436,8 @@ void __init at91cap9_init_interrupts(unsigned int priority[NR_AIC_IRQS])
 	/* Enable GPIO interrupts */
 	at91_gpio_irq_setup();
 }
+
+struct at91_soc __initdata at91cap9_soc = {
+	.map_io = at91cap9_map_io,
+	.init = at91cap9_initialize,
+};

index a67143a..382354f 100644
@@ -20,16 +20,12 @@
 #include <mach/at91_st.h>
 #include <mach/cpu.h>
 
+#include "soc.h"
 #include "generic.h"
 #include "clock.h"
 
 static struct map_desc at91rm9200_io_desc[] __initdata = {
 	{
-		.virtual	= AT91_VA_BASE_SYS,
-		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
 		.virtual	= AT91_VA_BASE_EMAC,
 		.pfn		= __phys_to_pfn(AT91RM9200_BASE_EMAC),
 		.length		= SZ_16K,

@@ -328,13 +324,13 @@ void __init at91rm9200_set_type(int type)
 /* --------------------------------------------------------------------
  *  AT91RM9200 processor initialization
  * -------------------------------------------------------------------- */
-void __init at91rm9200_map_io(void)
+static void __init at91rm9200_map_io(void)
 {
 	/* Map peripherals */
 	iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc));
 }
 
-void __init at91rm9200_initialize(unsigned long main_clock)
+static void __init at91rm9200_initialize(unsigned long main_clock)
 {
 	at91_arch_reset = at91rm9200_reset;
 	at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)

@@ -407,3 +403,8 @@ void __init at91rm9200_init_interrupts(unsigned int priority[NR_AIC_IRQS])
 	/* Enable GPIO interrupts */
 	at91_gpio_irq_setup();
 }
+
+struct at91_soc __initdata at91rm9200_soc = {
+	.map_io = at91rm9200_map_io,
+	.init = at91rm9200_initialize,
+};

index edaec71..11b73e0 100644
@@ -22,18 +22,10 @@
 #include <mach/at91_rstc.h>
 #include <mach/at91_shdwc.h>
 
+#include "soc.h"
 #include "generic.h"
 #include "clock.h"
 
-static struct map_desc at91sam9260_io_desc[] __initdata = {
-	{
-		.virtual	= AT91_VA_BASE_SYS,
-		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}
-};
-
 static struct map_desc at91sam9260_sram_desc[] __initdata = {
 	{
 		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE,

@@ -361,11 +353,8 @@ static void __init at91sam9xe_map_io(void)
 	iotable_init(at91sam9xe_sram_desc, ARRAY_SIZE(at91sam9xe_sram_desc));
 }
 
-void __init at91sam9260_map_io(void)
+static void __init at91sam9260_map_io(void)
 {
-	/* Map peripherals */
-	iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc));
-
 	if (cpu_is_at91sam9xe())
 		at91sam9xe_map_io();
 	else if (cpu_is_at91sam9g20())

@@ -374,7 +363,7 @@ void __init at91sam9260_map_io(void)
 		iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc));
 }
 
-void __init at91sam9260_initialize(unsigned long main_clock)
+static void __init at91sam9260_initialize(unsigned long main_clock)
 {
 	at91_arch_reset = at91sam9_alt_reset;
 	pm_power_off = at91sam9260_poweroff;

@@ -444,3 +433,8 @@ void __init at91sam9260_init_interrupts(unsigned int priority[NR_AIC_IRQS])
 	/* Enable GPIO interrupts */
 	at91_gpio_irq_setup();
 }
+
+struct at91_soc __initdata at91sam9260_soc = {
+	.map_io = at91sam9260_map_io,
+	.init = at91sam9260_initialize,
+};

index d2e5fee..42eca26 100644
@@ -22,18 +22,10 @@
 #include <mach/at91_rstc.h>
 #include <mach/at91_shdwc.h>
 
+#include "soc.h"
 #include "generic.h"
 #include "clock.h"
 
-static struct map_desc at91sam9261_io_desc[] __initdata = {
-	{
-		.virtual	= AT91_VA_BASE_SYS,
-		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	},
-};
-
 static struct map_desc at91sam9261_sram_desc[] __initdata = {
 	{
 		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9261_SRAM_SIZE,

@@ -322,18 +314,15 @@ static void at91sam9261_poweroff(void)
  *  AT91SAM9261 processor initialization
  * -------------------------------------------------------------------- */
 
-void __init at91sam9261_map_io(void)
+static void __init at91sam9261_map_io(void)
 {
-	/* Map peripherals */
-	iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc));
-
 	if (cpu_is_at91sam9g10())
 		iotable_init(at91sam9g10_sram_desc, ARRAY_SIZE(at91sam9g10_sram_desc));
 	else
 		iotable_init(at91sam9261_sram_desc, ARRAY_SIZE(at91sam9261_sram_desc));
 }
 
-void __init at91sam9261_initialize(unsigned long main_clock)
+static void __init at91sam9261_initialize(unsigned long main_clock)
 {
 	at91_arch_reset = at91sam9_alt_reset;
 	pm_power_off = at91sam9261_poweroff;

@@ -403,3 +392,8 @@ void __init at91sam9261_init_interrupts(unsigned int priority[NR_AIC_IRQS])
 	/* Enable GPIO interrupts */
 	at91_gpio_irq_setup();
 }
+
+struct at91_soc __initdata at91sam9261_soc = {
+	.map_io = at91sam9261_map_io,
+	.init = at91sam9261_initialize,
+};

index 9502bfd..6515897 100644
@@ -21,16 +21,12 @@
 #include <mach/at91_rstc.h>
 #include <mach/at91_shdwc.h>
 
+#include "soc.h"
 #include "generic.h"
 #include "clock.h"
 
-static struct map_desc at91sam9263_io_desc[] __initdata = {
+static struct map_desc at91sam9263_sram_desc[] __initdata = {
 	{
-		.virtual	= AT91_VA_BASE_SYS,
-		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
 		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE,
 		.pfn		= __phys_to_pfn(AT91SAM9263_SRAM0_BASE),
 		.length		= AT91SAM9263_SRAM0_SIZE,

@@ -333,13 +329,12 @@ static void at91sam9263_poweroff(void)
  *  AT91SAM9263 processor initialization
  * -------------------------------------------------------------------- */
 
-void __init at91sam9263_map_io(void)
+static void __init at91sam9263_map_io(void)
 {
-	/* Map peripherals */
-	iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc));
+	iotable_init(at91sam9263_sram_desc, ARRAY_SIZE(at91sam9263_sram_desc));
 }
 
-void __init at91sam9263_initialize(unsigned long main_clock)
+static void __init at91sam9263_initialize(unsigned long main_clock)
 {
 	at91_arch_reset = at91sam9_alt_reset;
 	pm_power_off = at91sam9263_poweroff;

@@ -408,3 +403,8 @@ void __init at91sam9263_init_interrupts(unsigned int priority[NR_AIC_IRQS])
 	/* Enable GPIO interrupts */
 	at91_gpio_irq_setup();
 }
+
+struct at91_soc __initdata at91sam9263_soc = {
+	.map_io = at91sam9263_map_io,
+	.init = at91sam9263_initialize,
+};

index 3db8132..a5f1473 100644
@@ -22,16 +22,12 @@
 #include <mach/at91_shdwc.h>
 #include <mach/cpu.h>
 
+#include "soc.h"
 #include "generic.h"
 #include "clock.h"
 
-static struct map_desc at91sam9g45_io_desc[] __initdata = {
+static struct map_desc at91sam9g45_sram_desc[] __initdata = {
 	{
-		.virtual	= AT91_VA_BASE_SYS,
-		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
 		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9G45_SRAM_SIZE,
 		.pfn		= __phys_to_pfn(AT91SAM9G45_SRAM_BASE),
 		.length		= AT91SAM9G45_SRAM_SIZE,

@@ -352,13 +348,12 @@ static void at91sam9g45_poweroff(void)
  *  AT91SAM9G45 processor initialization
  * -------------------------------------------------------------------- */
 
-void __init at91sam9g45_map_io(void)
+static void __init at91sam9g45_map_io(void)
 {
-	/* Map peripherals */
-	iotable_init(at91sam9g45_io_desc, ARRAY_SIZE(at91sam9g45_io_desc));
+	iotable_init(at91sam9g45_sram_desc, ARRAY_SIZE(at91sam9g45_sram_desc));
 }
 
-void __init at91sam9g45_initialize(unsigned long main_clock)
+static void __init at91sam9g45_initialize(unsigned long main_clock)
 {
 	at91_arch_reset = at91sam9g45_reset;
 	pm_power_off = at91sam9g45_poweroff;

@@ -427,3 +422,8 @@ void __init at91sam9g45_init_interrupts(unsigned int priority[NR_AIC_IRQS])
 	/* Enable GPIO interrupts */
 	at91_gpio_irq_setup();
 }
+
+struct at91_soc __initdata at91sam9g45_soc = {
+	.map_io = at91sam9g45_map_io,
+	.init = at91sam9g45_initialize,
+};

index d2f521e..77a20ef 100644
@@ -21,18 +21,10 @@
 #include <mach/at91_rstc.h>
 #include <mach/at91_shdwc.h>
 
+#include "soc.h"
 #include "generic.h"
 #include "clock.h"
 
-static struct map_desc at91sam9rl_io_desc[] __initdata = {
-	{
-		.virtual	= AT91_VA_BASE_SYS,
-		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	},
-};
-
 static struct map_desc at91sam9rl_sram_desc[] __initdata = {
 	{
 		.pfn		= __phys_to_pfn(AT91SAM9RL_SRAM_BASE),

@@ -303,13 +295,10 @@ static void at91sam9rl_poweroff(void)
  *  AT91SAM9RL processor initialization
  * -------------------------------------------------------------------- */
 
-void __init at91sam9rl_map_io(void)
+static void __init at91sam9rl_map_io(void)
 {
 	unsigned long cidr, sram_size;
 
-	/* Map peripherals */
-	iotable_init(at91sam9rl_io_desc, ARRAY_SIZE(at91sam9rl_io_desc));
-
 	cidr = at91_sys_read(AT91_DBGU_CIDR);
 
 	switch (cidr & AT91_CIDR_SRAMSIZ) {

@@ -328,7 +317,7 @@ void __init at91sam9rl_map_io(void)
 	iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc));
 }
 
-void __init at91sam9rl_initialize(unsigned long main_clock)
+static void __init at91sam9rl_initialize(unsigned long main_clock)
 {
 	at91_arch_reset = at91sam9_alt_reset;
 	pm_power_off = at91sam9rl_poweroff;

@@ -397,3 +386,8 @@ void __init at91sam9rl_init_interrupts(unsigned int priority[NR_AIC_IRQS])
 	/* Enable GPIO interrupts */
 	at91_gpio_irq_setup();
 }
+
+struct at91_soc __initdata at91sam9rl_soc = {
+	.map_io = at91sam9rl_map_io,
+	.init = at91sam9rl_initialize,
+};

index ab1d463..e588a9e 100644
@@ -46,7 +46,7 @@ static void __init onearm_init_early(void)
 	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
 
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000);
+	at91_initialize(18432000);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

@@ -97,7 +97,7 @@ static void __init onearm_board_init(void)
 MACHINE_START(ONEARM, "Ajeco 1ARM single board computer")
 	/* Maintainer: Lennert Buytenhek <[email protected]> */
 	.timer		= &at91rm9200_timer,
-	.map_io		= at91rm9200_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= onearm_init_early,
 	.init_irq	= onearm_init_irq,
 	.init_machine	= onearm_board_init,

index a4924de..7cd1cb2 100644
@@ -51,7 +51,7 @@
 static void __init afeb9260_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
-	at91sam9260_initialize(18432000);
+	at91_initialize(18432000);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

@@ -219,7 +219,7 @@ static void __init afeb9260_board_init(void)
 MACHINE_START(AFEB9260, "Custom afeb9260 board")
 	/* Maintainer: Sergey Lapin <[email protected]> */
 	.timer		= &at91sam926x_timer,
-	.map_io		= at91sam9260_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= afeb9260_init_early,
 	.init_irq	= afeb9260_init_irq,
 	.init_machine	= afeb9260_board_init,

index dfa896d..f263aa8 100644
@@ -50,7 +50,7 @@
 static void __init eb_init_early(void)
 {
 	/* Initialize processor: 12.500 MHz crystal */
-	at572d940hf_initialize(12000000);
+	at91_initialize(12000000);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

@@ -316,7 +316,7 @@ static void __init eb_board_init(void)
 MACHINE_START(AT572D940HFEB, "Atmel AT91D940HF-EB")
 	/* Maintainer: Atmel <[email protected]> */
 	.timer		= &at91sam926x_timer,
-	.map_io		= at572d940hf_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= eb_init_early,
 	.init_irq	= eb_init_irq,
 	.init_machine	= eb_board_init,

index 148fccb..bdc52e6 100644
@@ -48,7 +48,7 @@
 static void __init cam60_init_early(void)
 {
 	/* Initialize processor: 10 MHz crystal */
-	at91sam9260_initialize(10000000);
+	at91_initialize(10000000);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

@@ -199,7 +199,7 @@ static void __init cam60_board_init(void)
 MACHINE_START(CAM60, "KwikByte CAM60")
 	/* Maintainer: KwikByte */
 	.timer		= &at91sam926x_timer,
-	.map_io		= at91sam9260_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= cam60_init_early,
 	.init_irq	= cam60_init_irq,
 	.init_machine	= cam60_board_init,

index 1904fdf..dfafdf9 100644
@@ -53,7 +53,7 @@
 static void __init cap9adk_init_early(void)
 {
 	/* Initialize processor: 12 MHz crystal */
-	at91cap9_initialize(12000000);
+	at91_initialize(12000000);
 
 	/* Setup the LEDs: USER1 and USER2 LED for cpu/timer... */
 	at91_init_leds(AT91_PIN_PA10, AT91_PIN_PA11);

@@ -397,7 +397,7 @@ static void __init cap9adk_board_init(void)
 MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK")
 	/* Maintainer: Stelian Pop <[email protected]> */
 	.timer		= &at91sam926x_timer,
-	.map_io		= at91cap9_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= cap9adk_init_early,
 	.init_irq	= cap9adk_init_irq,
 	.init_machine	= cap9adk_board_init,

index f36b186..0a92b7a 100644
@@ -43,7 +43,7 @@
 static void __init carmeva_init_early(void)
 {
 	/* Initialize processor: 20.000 MHz crystal */
-	at91rm9200_initialize(20000000);
+	at91_initialize(20000000);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

@@ -163,7 +163,7 @@ static void __init carmeva_board_init(void)
 MACHINE_START(CARMEVA, "Carmeva")
 	/* Maintainer: Conitec Datasystems */
 	.timer		= &at91rm9200_timer,
-	.map_io		= at91rm9200_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= carmeva_init_early,
 	.init_irq	= carmeva_init_irq,
 	.init_machine	= carmeva_board_init,

index 9805110..01128f9 100644
@@ -50,7 +50,7 @@
 static void __init cpu9krea_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
-	at91sam9260_initialize(18432000);
+	at91_initialize(18432000);
 
 	/* DGBU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

@@ -376,7 +376,7 @@ MACHINE_START(CPUAT9G20, "Eukrea CPU9G20")
 #endif
 	/* Maintainer: Eric Benard - EUKREA Electromatique */
 	.timer		= &at91sam926x_timer,
-	.map_io		= at91sam9260_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= cpu9krea_init_early,
 	.init_irq	= cpu9krea_init_irq,
 	.init_machine	= cpu9krea_board_init,

index 6daabe3..0692606 100644
@@ -57,7 +57,7 @@ static void __init cpuat91_init_early(void)
 	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
 
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000);
+	at91_initialize(18432000);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

@@ -180,7 +180,7 @@ static void __init cpuat91_board_init(void)
 MACHINE_START(CPUAT91, "Eukrea")
 	/* Maintainer: Eric Benard - EUKREA Electromatique */
 	.timer		= &at91rm9200_timer,
-	.map_io		= at91rm9200_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= cpuat91_init_early,
 	.init_irq	= cpuat91_init_irq,
 	.init_machine	= cpuat91_board_init,

index d98bcec..923cccb 100644
@@ -46,7 +46,7 @@
 static void __init csb337_init_early(void)
 {
 	/* Initialize processor: 3.6864 MHz crystal */
-	at91rm9200_initialize(3686400);
+	at91_initialize(3686400);
 
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);

@@ -258,7 +258,7 @@ static void __init csb337_board_init(void)
 MACHINE_START(CSB337, "Cogent CSB337")
 	/* Maintainer: Bill Gatliff */
 	.timer		= &at91rm9200_timer,
-	.map_io		= at91rm9200_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= csb337_init_early,
 	.init_irq	= csb337_init_irq,
 	.init_machine	= csb337_board_init,

index 019aab4..51131ca 100644
@@ -43,7 +43,7 @@
 static void __init csb637_init_early(void)
 {
 	/* Initialize processor: 3.6864 MHz crystal */
-	at91rm9200_initialize(3686400);
+	at91_initialize(3686400);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

@@ -139,7 +139,7 @@ static void __init csb637_board_init(void)
 MACHINE_START(CSB637, "Cogent CSB637")
 	/* Maintainer: Bill Gatliff */
 	.timer		= &at91rm9200_timer,
-	.map_io		= at91rm9200_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= csb637_init_early,
 	.init_irq	= csb637_init_irq,
 	.init_machine	= csb637_board_init,

index e948453..705071c 100644
@@ -43,7 +43,7 @@
 static void __init eb9200_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000);
+	at91_initialize(18432000);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

@@ -121,7 +121,7 @@ static void __init eb9200_board_init(void)
 
 MACHINE_START(ATEB9200, "Embest ATEB9200")
 	.timer		= &at91rm9200_timer,
-	.map_io		= at91rm9200_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= eb9200_init_early,
 	.init_irq	= eb9200_init_irq,
 	.init_machine	= eb9200_board_init,

index a6f57fa..a9f106a 100644
@@ -49,7 +49,7 @@ static void __init ecb_at91init_early(void)
 	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
 
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000);
+	at91_initialize(18432000);
 
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);

@@ -173,7 +173,7 @@ static void __init ecb_at91board_init(void)
 MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
 	/* Maintainer: emQbit.com */
 	.timer		= &at91rm9200_timer,
-	.map_io		= at91rm9200_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= ecb_at91init_early,
 	.init_irq	= ecb_at91init_irq,
 	.init_machine	= ecb_at91board_init,

index bfc0062..8639fbd 100644
@@ -35,7 +35,7 @@ static void __init eco920_init_early(void)
 	/* Set cpu type: PQFP */
 	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
 
-	at91rm9200_initialize(18432000);
+	at91_initialize(18432000);
 
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);

@@ -135,7 +135,7 @@ static void __init eco920_board_init(void)
 MACHINE_START(ECO920, "eco920")
 	/* Maintainer: Sascha Hauer */
 	.timer		= &at91rm9200_timer,
-	.map_io		= at91rm9200_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= eco920_init_early,
 	.init_irq	= eco920_init_irq,
 	.init_machine	= eco920_board_init,

index 466c063..f45583e 100644
@@ -40,7 +40,7 @@
 static void __init flexibity_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
-	at91sam9260_initialize(18432000);
+	at91_initialize(18432000);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

@@ -155,7 +155,7 @@ static void __init flexibity_board_init(void)
 MACHINE_START(FLEXIBITY, "Flexibity Connect")
 	/* Maintainer: Maxim Osipov */
 	.timer		= &at91sam926x_timer,
-	.map_io		= at91sam9260_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= flexibity_init_early,
 	.init_irq	= flexibity_init_irq,
 	.init_machine	= flexibity_board_init,

index e2d1dc9..b78442b 100644
@@ -60,7 +60,7 @@
 static void __init foxg20_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
-	at91sam9260_initialize(18432000);
+	at91_initialize(18432000);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

@@ -267,7 +267,7 @@ static void __init foxg20_board_init(void)
 MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20")
 	/* Maintainer: Sergio Tanzilli */
 	.timer		= &at91sam926x_timer,
-	.map_io		= at91sam9260_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= foxg20_init_early,
 	.init_irq	= foxg20_init_irq,
 	.init_machine	= foxg20_board_init,

index 1d4f36b..6588143 100644
@@ -577,7 +577,7 @@ static void __init gsia18s_board_init(void)
 
 MACHINE_START(GSIA18S, "GS_IA18_S")
 	.timer		= &at91sam926x_timer,
-	.map_io		= at91sam9260_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= gsia18s_init_early,
 	.init_irq	= init_irq,
 	.init_machine	= gsia18s_board_init,

index 9b003ff..d26b960 100644
@@ -46,7 +46,7 @@ static void __init kafa_init_early(void)
 	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
 
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000);
+	at91_initialize(18432000);
 
 	/* Set up the LEDs */
 	at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);

@@ -99,7 +99,7 @@ static void __init kafa_board_init(void)
 MACHINE_START(KAFA, "Sperry-Sun KAFA")
 	/* Maintainer: Sergei Sharonov */
 	.timer		= &at91rm9200_timer,
-	.map_io		= at91rm9200_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= kafa_init_early,
 	.init_irq	= kafa_init_irq,
 	.init_machine	= kafa_board_init,

index a813a74..a4d8153 100644
@@ -48,7 +48,7 @@ static void __init kb9202_init_early(void)
 	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
 
 	/* Initialize processor: 10 MHz crystal */
-	at91rm9200_initialize(10000000);
+	at91_initialize(10000000);
 
 	/* Set up the LEDs */
 	at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);

@@ -140,7 +140,7 @@ static void __init kb9202_board_init(void)
 MACHINE_START(KB9200, "KB920x")
 	/* Maintainer: KwikByte, Inc. */
 	.timer		= &at91rm9200_timer,
-	.map_io		= at91rm9200_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= kb9202_init_early,
 	.init_irq	= kb9202_init_irq,
 	.init_machine	= kb9202_board_init,

index 961e805..26a4c63 100644
@@ -54,7 +54,7 @@
 static void __init neocore926_init_early(void)
 {
 	/* Initialize processor: 20 MHz crystal */
-	at91sam9263_initialize(20000000);
+	at91_initialize(20000000);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

@@ -388,7 +388,7 @@ static void __init neocore926_board_init(void)
 MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926")
 	/* Maintainer: ADENEO */
 	.timer		= &at91sam926x_timer,
-	.map_io		= at91sam9263_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= neocore926_init_early,
 	.init_irq	= neocore926_init_irq,
 	.init_machine	= neocore926_board_init,

index 21a21af..7651e7f 100644
@@ -223,7 +223,7 @@ static void __init pcontrol_g20_board_init(void)
 MACHINE_START(PCONTROL_G20, "PControl G20")
 	/* Maintainer: pgsellmann at portner-elektronik.at */
 	.timer		= &at91sam926x_timer,
-	.map_io		= at91sam9260_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= pcontrol_g20_init_early,
 	.init_irq	= init_irq,
 	.init_machine	= pcontrol_g20_board_init,

index 756cc2a..c7294f8 100644
@@ -46,7 +46,7 @@
 static void __init picotux200_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000);
+	at91_initialize(18432000);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

@@ -124,7 +124,7 @@ static void __init picotux200_board_init(void)
 MACHINE_START(PICOTUX2XX, "picotux 200")
 	/* Maintainer: Kleinhenz Elektronik GmbH */
 	.timer		= &at91rm9200_timer,
-	.map_io		= at91rm9200_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= picotux200_init_early,
 	.init_irq	= picotux200_init_irq,
 	.init_machine	= picotux200_board_init,

index d1a6001..68e31a9 100644
@@ -51,7 +51,7 @@
 static void __init ek_init_early(void)
 {
 	/* Initialize processor: 12.000 MHz crystal */
-	at91sam9260_initialize(12000000);
+	at91_initialize(12000000);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

@@ -269,7 +269,7 @@ static void __init ek_board_init(void)
 MACHINE_START(QIL_A9260, "CALAO QIL_A9260")
 	/* Maintainer: calao-systems */
 	.timer		= &at91sam926x_timer,
-	.map_io		= at91sam9260_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,

index aef9627..97c6f21 100644
@@ -48,7 +48,7 @@
 static void __init dk_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000);
+	at91_initialize(18432000);
 
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);

@@ -228,7 +228,7 @@ static void __init dk_board_init(void)
 MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
 	/* Maintainer: SAN People/Atmel */
 	.timer		= &at91rm9200_timer,
-	.map_io		= at91rm9200_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= dk_init_early,
 	.init_irq	= dk_init_irq,
 	.init_machine	= dk_board_init,

index 015a021..72aa8bf 100644
@@ -48,7 +48,7 @@
 static void __init ek_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000);
+	at91_initialize(18432000);
 
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);

@@ -194,7 +194,7 @@ static void __init ek_board_init(void)
 MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
 	/* Maintainer: SAN People/Atmel */
 	.timer		= &at91rm9200_timer,
-	.map_io		= at91rm9200_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,

index aaf1bf0..93c36bd 100644
@@ -47,7 +47,7 @@
 static void __init ek_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
-	at91sam9260_initialize(18432000);
+	at91_initialize(18432000);
 
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6);

@@ -213,7 +213,7 @@ static void __init ek_board_init(void)
 MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
 	/* Maintainer: Olimex */
 	.timer		= &at91sam926x_timer,
-	.map_io		= at91sam9260_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,

index d600dc1..0330db3 100644
@@ -53,7 +53,7 @@
 static void __init ek_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
-	at91sam9260_initialize(18432000);
+	at91_initialize(18432000);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

@@ -354,7 +354,7 @@ static void __init ek_board_init(void)
 MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
 	/* Maintainer: Atmel */
 	.timer		= &at91sam926x_timer,
-	.map_io		= at91sam9260_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,

index f897f84..65ab1cd 100644
@@ -57,7 +57,7 @@
 static void __init ek_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
-	at91sam9261_initialize(18432000);
+	at91_initialize(18432000);
 
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);

@@ -621,7 +621,7 @@ MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
 #endif
 	/* Maintainer: Atmel */
 	.timer		= &at91sam926x_timer,
-	.map_io		= at91sam9261_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,

index 605b26f..5b07981 100644
@@ -56,7 +56,7 @@
 static void __init ek_init_early(void)
 {
 	/* Initialize processor: 16.367 MHz crystal */
-	at91sam9263_initialize(16367660);
+	at91_initialize(16367660);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

@@ -452,7 +452,7 @@ static void __init ek_board_init(void)
 MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
 	/* Maintainer: Atmel */
 	.timer		= &at91sam926x_timer,
-	.map_io		= at91sam9263_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,

index 7624cf0..8e7327a 100644
@@ -64,7 +64,7 @@ static int inline ek_have_2mmc(void)
 static void __init ek_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
-	at91sam9260_initialize(18432000);
+	at91_initialize(18432000);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

@@ -404,7 +404,7 @@ static void __init ek_board_init(void)
 MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK")
 	/* Maintainer: Atmel */
 	.timer		= &at91sam926x_timer,
-	.map_io		= at91sam9260_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,

@@ -413,7 +413,7 @@ MACHINE_END
 MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod")
 	/* Maintainer: Atmel */
 	.timer		= &at91sam926x_timer,
-	.map_io		= at91sam9260_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,

index 063c95d..f112ad9 100644
@@ -50,7 +50,7 @@
 static void __init ek_init_early(void)
 {
 	/* Initialize processor: 12.000 MHz crystal */
-	at91sam9g45_initialize(12000000);
+	at91_initialize(12000000);
 
 	/* DGBU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

@@ -422,7 +422,7 @@ static void __init ek_board_init(void)
 MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
 	/* Maintainer: Atmel */
 	.timer		= &at91sam926x_timer,
-	.map_io		= at91sam9g45_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,

index effb399..defbca4 100644
@@ -41,7 +41,7 @@
 static void __init ek_init_early(void)
 {
 	/* Initialize processor: 12.000 MHz crystal */
-	at91sam9rl_initialize(12000000);
+	at91_initialize(12000000);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

@@ -330,7 +330,7 @@ static void __init ek_board_init(void)
 MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
 	/* Maintainer: Atmel */
 	.timer		= &at91sam926x_timer,
-	.map_io		= at91sam9rl_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,

index 3eb0a11..c600b14 100644
@@ -42,7 +42,7 @@
 
 static void __init snapper9260_init_early(void)
 {
-	at91sam9260_initialize(18432000);
+	at91_initialize(18432000);
 
 	/* Debug on ttyS0 */
 	at91_register_uart(0, 0, 0);

@@ -179,7 +179,7 @@ static void __init snapper9260_board_init(void)
 
 MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module")
 	.timer		= &at91sam926x_timer,
-	.map_io		= at91sam9260_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= snapper9260_init_early,
 	.init_irq	= snapper9260_init_irq,
 	.init_machine	= snapper9260_board_init,

index 5e5c856..e65efda 100644
@@ -35,7 +35,7 @@
 void __init stamp9g20_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
-	at91sam9260_initialize(18432000);
+	at91_initialize(18432000);
 
 	/* DGBU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

@@ -299,7 +299,7 @@ static void __init stamp9g20evb_board_init(void)
 MACHINE_START(PORTUXG20, "taskit PortuxG20")
 	/* Maintainer: taskit GmbH */
 	.timer		= &at91sam926x_timer,
-	.map_io		= at91sam9260_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= portuxg20_init_early,
 	.init_irq	= init_irq,
 	.init_machine	= portuxg20_board_init,

@@ -308,7 +308,7 @@ MACHINE_END
 MACHINE_START(STAMP9G20, "taskit Stamp9G20")
 	/* Maintainer: taskit GmbH */
 	.timer		= &at91sam926x_timer,
-	.map_io		= at91sam9260_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= stamp9g20evb_init_early,
 	.init_irq	= init_irq,
 	.init_machine	= stamp9g20evb_board_init,

index 0e784e6..afc3b04 100644
@@ -51,7 +51,7 @@
 static void __init ek_init_early(void)
 {
 	/* Initialize processor: 12.000 MHz crystal */
-	at91sam9260_initialize(12000000);
+	at91_initialize(12000000);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

@@ -229,7 +229,7 @@ static void __init ek_board_init(void)
 MACHINE_START(USB_A9260, "CALAO USB_A9260")
 	/* Maintainer: calao-systems */
 	.timer		= &at91sam926x_timer,
-	.map_io		= at91sam9260_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,

index cf626dd..25357e0 100644
@@ -50,7 +50,7 @@
 static void __init ek_init_early(void)
 {
 	/* Initialize processor: 12.00 MHz crystal */
-	at91sam9263_initialize(12000000);
+	at91_initialize(12000000);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

@@ -245,7 +245,7 @@ static void __init ek_board_init(void)
 MACHINE_START(USB_A9263, "CALAO USB_A9263")
 	/* Maintainer: calao-systems */
 	.timer		= &at91sam926x_timer,
-	.map_io		= at91sam9263_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,

index c208cc3..e8a8ab9 100644
@@ -56,7 +56,7 @@ static void __init yl9200_init_early(void)
 	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
 
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000);
+	at91_initialize(18432000);
 
 	/* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
 	at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);

@@ -599,7 +599,7 @@ static void __init yl9200_board_init(void)
 MACHINE_START(YL9200, "uCdragon YL-9200")
 	/* Maintainer: S.Birtles */
 	.timer		= &at91rm9200_timer,
-	.map_io		= at91rm9200_map_io,
+	.map_io		= at91_map_io,
 	.init_early	= yl9200_init_early,
 	.init_irq	= yl9200_init_irq,
 	.init_machine	= yl9200_board_init,

index 46721996..84e5b1d 100644
@@ -11,27 +11,12 @@
 #include <linux/clkdev.h>
 
  /* Map io */
-extern void __init at91rm9200_map_io(void);
-extern void __init at91sam9260_map_io(void);
-extern void __init at91sam9261_map_io(void);
-extern void __init at91sam9263_map_io(void);
-extern void __init at91sam9rl_map_io(void);
-extern void __init at91sam9g45_map_io(void);
-extern void __init at91x40_map_io(void);
-extern void __init at91cap9_map_io(void);
-extern void __init at572d940hf_map_io(void);
+extern void __init at91_map_io(void);
 
  /* Processors */
 extern void __init at91rm9200_set_type(int type);
-extern void __init at91rm9200_initialize(unsigned long main_clock);
-extern void __init at91sam9260_initialize(unsigned long main_clock);
-extern void __init at91sam9261_initialize(unsigned long main_clock);
-extern void __init at91sam9263_initialize(unsigned long main_clock);
-extern void __init at91sam9rl_initialize(unsigned long main_clock);
-extern void __init at91sam9g45_initialize(unsigned long main_clock);
+extern void __init at91_initialize(unsigned long main_clock);
 extern void __init at91x40_initialize(unsigned long main_clock);
-extern void __init at91cap9_initialize(unsigned long main_clock);
-extern void __init at572d940hf_initialize(unsigned long main_clock);
 
  /* Interrupts */
 extern void __init at91rm9200_init_interrupts(unsigned int priority[]);

index a738dc7..80c3df2 100644
@@ -81,7 +81,6 @@
 #define AT572D940HF_BASE_EMAC	0xfffd8000
 #define AT572D940HF_BASE_CAN0	0xfffdc000
 #define AT572D940HF_BASE_CAN1	0xfffe0000
-#define AT91_BASE_SYS		0xffffea00
 
 
 /*

index 6659938..c5df1e8 100644
@@ -75,7 +75,6 @@
 #define AT91CAP9_BASE_EMAC		0xfffbc000
 #define AT91CAP9_BASE_ADC		0xfffc0000
 #define AT91CAP9_BASE_ISI		0xfffc4000
-#define AT91_BASE_SYS			0xffffe200
 
 /*
  * System Peripherals (offset from AT91_BASE_SYS)

index 99e0f8d..e4037b5 100644
@@ -74,7 +74,6 @@
 #define AT91RM9200_BASE_SSC1	0xfffd4000
 #define AT91RM9200_BASE_SSC2	0xfffd8000
 #define AT91RM9200_BASE_SPI	0xfffe0000
-#define AT91_BASE_SYS		0xfffff000
 
 
 /*

index 8b6bf83..9a79116 100644
@@ -76,7 +76,6 @@
 #define AT91SAM9260_BASE_TC4		0xfffdc040
 #define AT91SAM9260_BASE_TC5		0xfffdc080
 #define AT91SAM9260_BASE_ADC		0xfffe0000
-#define AT91_BASE_SYS			0xffffe800
 
 /*
  * System Peripherals (offset from AT91_BASE_SYS)

index eafbdda..ce59620 100644
@@ -60,7 +60,6 @@
 #define AT91SAM9261_BASE_SSC2		0xfffc4000
 #define AT91SAM9261_BASE_SPI0		0xfffc8000
 #define AT91SAM9261_BASE_SPI1		0xfffcc000
-#define AT91_BASE_SYS			0xffffea00
 
 
 /*

index e2d3482..f1b9296 100644
@@ -70,7 +70,6 @@
 #define AT91SAM9263_BASE_EMAC		0xfffbc000
 #define AT91SAM9263_BASE_ISI		0xfffc4000
 #define AT91SAM9263_BASE_2DGE		0xfffc8000
-#define AT91_BASE_SYS			0xffffe000
 
 /*
  * System Peripherals (offset from AT91_BASE_SYS)

index 659304a..2c611b9 100644
@@ -82,7 +82,6 @@
 #define AT91SAM9G45_BASE_TC3		0xfffd4000
 #define AT91SAM9G45_BASE_TC4		0xfffd4040
 #define AT91SAM9G45_BASE_TC5		0xfffd4080
-#define AT91_BASE_SYS			0xffffe200
 
 /*
  * System Peripherals (offset from AT91_BASE_SYS)

index 41dbbe6..1aabacd 100644
@@ -64,7 +64,6 @@
 #define AT91SAM9RL_BASE_TSC	0xfffd0000
 #define AT91SAM9RL_BASE_UDPHS	0xfffd4000
 #define AT91SAM9RL_BASE_AC97C	0xfffd8000
-#define AT91_BASE_SYS		0xffffc000
 
 
 /*

index 469d3af..e820c96 100644
@@ -38,6 +38,20 @@
 #error "Unsupported AT91 processor"
 #endif
 
+#if !defined(CONFIG_ARCH_AT91X40)
+/*
+ * On all at91 except rm9200 and x40 have the System Controller starts
+ * at address 0xffffc000 and has a size of 16KiB.
+ *
+ * On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting
+ * at 0xfffff000
+ *
+ * Removes the individual definitions of AT91_BASE_SYS and
+ * replaces them with a common version at base 0xfffffc000 and size 16KiB
+ * and map the same memory space
+ */
+#define AT91_BASE_SYS	0xffffc000
+#endif
 
 /*
  * Peripheral identifiers/interrupts.

65 lines not on this page · raw message

new file mode 100644
index 0000000..917f610
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
+ *
+ * Under GPLv2
+ */
+
+struct at91_soc {
+	void (*map_io)(void);
+	void (*init)(unsigned long main_clock);
+};
+
+extern struct at91_soc at91_boot_soc;
+extern struct at91_soc at572d940hf_soc;
+extern struct at91_soc at91cap9_soc;
+extern struct at91_soc at91rm9200_soc;
+extern struct at91_soc at91sam9260_soc;
+extern struct at91_soc at91sam9261_soc;
+extern struct at91_soc at91sam9263_soc;
+extern struct at91_soc at91sam9g45_soc;
+extern struct at91_soc at91sam9rl_soc;
+extern struct at91_soc at91sam9x5_soc;

index 1b5b320..39827ebc 100644
@@ -425,19 +425,8 @@ static unsigned int at572d940hf_default_irq_priority[NR_AIC_IRQS] __initdata = {
 	0,	/* Advanced Interrupt Controller */
 };
 
-void __init at572d940hf_init_interrupts(unsigned int priority[NR_AIC_IRQS])
-{
-	if (!priority)
-		priority = at572d940hf_default_irq_priority;
-
-	/* Initialize the AIC interrupt controller */
-	at91_aic_init(priority);
-
-	/* Enable GPIO interrupts */
-	at91_gpio_irq_setup();
-}
-
 struct at91_soc __initdata at572d940hf_soc = {
 	.map_io = at572d940hf_map_io,
+	.default_irq_priority = at572d940hf_default_irq_priority,
 	.init = at572d940hf_initialize,
 };

index cc32ac8..238b6a0 100644
@@ -425,19 +425,8 @@ static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = {
 	0,	/* Advanced Interrupt Controller (IRQ1) */
 };
 
-void __init at91cap9_init_interrupts(unsigned int priority[NR_AIC_IRQS])
-{
-	if (!priority)
-		priority = at91cap9_default_irq_priority;
-
-	/* Initialize the AIC interrupt controller */
-	at91_aic_init(priority);
-
-	/* Enable GPIO interrupts */
-	at91_gpio_irq_setup();
-}
-
 struct at91_soc __initdata at91cap9_soc = {
 	.map_io = at91cap9_map_io,
+	.default_irq_priority = at91cap9_default_irq_priority,
 	.init = at91cap9_initialize,
 };

index 382354f..89e4807 100644
@@ -392,19 +392,8 @@ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
 	0	/* Advanced Interrupt Controller (IRQ6) */
 };
 
-void __init at91rm9200_init_interrupts(unsigned int priority[NR_AIC_IRQS])
-{
-	if (!priority)
-		priority = at91rm9200_default_irq_priority;
-
-	/* Initialize the AIC interrupt controller */
-	at91_aic_init(priority);
-
-	/* Enable GPIO interrupts */
-	at91_gpio_irq_setup();
-}
-
 struct at91_soc __initdata at91rm9200_soc = {
 	.map_io = at91rm9200_map_io,
+	.default_irq_priority = at91rm9200_default_irq_priority,
 	.init = at91rm9200_initialize,
 };

index 11b73e0..1f3abb4 100644
@@ -422,19 +422,8 @@ static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
 	0,	/* Advanced Interrupt Controller */
 };
 
-void __init at91sam9260_init_interrupts(unsigned int priority[NR_AIC_IRQS])
-{
-	if (!priority)
-		priority = at91sam9260_default_irq_priority;
-
-	/* Initialize the AIC interrupt controller */
-	at91_aic_init(priority);
-
-	/* Enable GPIO interrupts */
-	at91_gpio_irq_setup();
-}
-
 struct at91_soc __initdata at91sam9260_soc = {
 	.map_io = at91sam9260_map_io,
+	.default_irq_priority = at91sam9260_default_irq_priority,
 	.init = at91sam9260_initialize,
 };

index 42eca26..69bc26f 100644
@@ -381,19 +381,8 @@ static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
 	0,	/* Advanced Interrupt Controller */
 };
 
-void __init at91sam9261_init_interrupts(unsigned int priority[NR_AIC_IRQS])
-{
-	if (!priority)
-		priority = at91sam9261_default_irq_priority;
-
-	/* Initialize the AIC interrupt controller */
-	at91_aic_init(priority);
-
-	/* Enable GPIO interrupts */
-	at91_gpio_irq_setup();
-}
-
 struct at91_soc __initdata at91sam9261_soc = {
 	.map_io = at91sam9261_map_io,
+	.default_irq_priority = at91sam9261_default_irq_priority,
 	.init = at91sam9261_initialize,
 };

index 6515897..3da9103 100644
@@ -392,19 +392,8 @@ static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
 	0,	/* Advanced Interrupt Controller (IRQ1) */
 };
 
-void __init at91sam9263_init_interrupts(unsigned int priority[NR_AIC_IRQS])
-{
-	if (!priority)
-		priority = at91sam9263_default_irq_priority;
-
-	/* Initialize the AIC interrupt controller */
-	at91_aic_init(priority);
-
-	/* Enable GPIO interrupts */
-	at91_gpio_irq_setup();
-}
-
 struct at91_soc __initdata at91sam9263_soc = {
 	.map_io = at91sam9263_map_io,
+	.default_irq_priority = at91sam9263_default_irq_priority,
 	.init = at91sam9263_initialize,
 };

index a5f1473..ecca942 100644
@@ -411,19 +411,8 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = {
 	0,	/* Advanced Interrupt Controller (IRQ0) */
 };
 
-void __init at91sam9g45_init_interrupts(unsigned int priority[NR_AIC_IRQS])
-{
-	if (!priority)
-		priority = at91sam9g45_default_irq_priority;
-
-	/* Initialize the AIC interrupt controller */
-	at91_aic_init(priority);
-
-	/* Enable GPIO interrupts */
-	at91_gpio_irq_setup();
-}
-
 struct at91_soc __initdata at91sam9g45_soc = {
 	.map_io = at91sam9g45_map_io,
+	.default_irq_priority = at91sam9g45_default_irq_priority,
 	.init = at91sam9g45_initialize,
 };

index 77a20ef..c8de47f 100644
@@ -375,19 +375,8 @@ static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = {
 	0,	/* Advanced Interrupt Controller */
 };
 
-void __init at91sam9rl_init_interrupts(unsigned int priority[NR_AIC_IRQS])
-{
-	if (!priority)
-		priority = at91sam9rl_default_irq_priority;
-
-	/* Initialize the AIC interrupt controller */
-	at91_aic_init(priority);
-
-	/* Enable GPIO interrupts */
-	at91_gpio_irq_setup();
-}
-
 struct at91_soc __initdata at91sam9rl_soc = {
 	.map_io = at91sam9rl_map_io,
+	.default_irq_priority = at91sam9rl_default_irq_priority,
 	.init = at91sam9rl_initialize,
 };

index e588a9e..5aa5885 100644
@@ -63,11 +63,6 @@ static void __init onearm_init_early(void)
 	at91_set_serial_console(0);
 }
 
-static void __init onearm_init_irq(void)
-{
-	at91rm9200_init_interrupts(NULL);
-}
-
 static struct at91_eth_data __initdata onearm_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC4,
 	.is_rmii	= 1,

@@ -99,6 +94,6 @@ MACHINE_START(ONEARM, "Ajeco 1ARM single board computer")
 	.timer		= &at91rm9200_timer,
 	.map_io		= at91_map_io,
 	.init_early	= onearm_init_early,
-	.init_irq	= onearm_init_irq,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= onearm_board_init,
 MACHINE_END

index 7cd1cb2..b0c796d 100644
@@ -70,12 +70,6 @@ static void __init afeb9260_init_early(void)
 	at91_set_serial_console(0);
 }
 
-static void __init afeb9260_init_irq(void)
-{
-	at91sam9260_init_interrupts(NULL);
-}
-
-
 /*
  * USB Host port
  */

@@ -221,7 +215,7 @@ MACHINE_START(AFEB9260, "Custom afeb9260 board")
 	.timer		= &at91sam926x_timer,
 	.map_io		= at91_map_io,
 	.init_early	= afeb9260_init_early,
-	.init_irq	= afeb9260_init_irq,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= afeb9260_board_init,
 MACHINE_END
 

index f263aa8..da79a6e 100644
@@ -68,12 +68,6 @@ static void __init eb_init_early(void)
 	at91_set_serial_console(0);
 }
 
-static void __init eb_init_irq(void)
-{
-	at572d940hf_init_interrupts(NULL);
-}
-
-
 /*
  * USB Host Port
  */

@@ -318,6 +312,6 @@ MACHINE_START(AT572D940HFEB, "Atmel AT91D940HF-EB")
 	.timer		= &at91sam926x_timer,
 	.map_io		= at91_map_io,
 	.init_early	= eb_init_early,
-	.init_irq	= eb_init_irq,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= eb_board_init,
 MACHINE_END

index bdc52e6..d1abd58 100644
@@ -57,12 +57,6 @@ static void __init cam60_init_early(void)
 	at91_set_serial_console(0);
 }
 
-static void __init cam60_init_irq(void)
-{
-	at91sam9260_init_interrupts(NULL);
-}
-
-
 /*
  * USB Host
  */

@@ -201,6 +195,6 @@ MACHINE_START(CAM60, "KwikByte CAM60")
 	.timer		= &at91sam926x_timer,
 	.map_io		= at91_map_io,
 	.init_early	= cam60_init_early,
-	.init_irq	= cam60_init_irq,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= cam60_board_init,
 MACHINE_END

index dfafdf9..b78c4a3 100644
@@ -65,12 +65,6 @@ static void __init cap9adk_init_early(void)
 	at91_set_serial_console(0);
 }
 
-static void __init cap9adk_init_irq(void)
-{
-	at91cap9_init_interrupts(NULL);
-}
-
-
 /*
  * USB Host port
  */

@@ -399,6 +393,6 @@ MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK")
 	.timer		= &at91sam926x_timer,
 	.map_io		= at91_map_io,
 	.init_early	= cap9adk_init_early,
-	.init_irq	= cap9adk_init_irq,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= cap9adk_board_init,
 MACHINE_END

index 0a92b7a..c578c5d 100644
@@ -57,11 +57,6 @@ static void __init carmeva_init_early(void)
 	at91_set_serial_console(0);
 }
 
-static void __init carmeva_init_irq(void)
-{
-	at91rm9200_init_interrupts(NULL);
-}
-
 static struct at91_eth_data __initdata carmeva_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC4,
 	.is_rmii	= 1,

@@ -165,6 +160,6 @@ MACHINE_START(CARMEVA, "Carmeva")
 	.timer		= &at91rm9200_timer,
 	.map_io		= at91_map_io,
 	.init_early	= carmeva_init_early,
-	.init_irq	= carmeva_init_irq,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= carmeva_board_init,
 MACHINE_END

index 01128f9..f4da8a1 100644
@@ -81,11 +81,6 @@ static void __init cpu9krea_init_early(void)
 	at91_set_serial_console(0);
 }
 
-static void __init cpu9krea_init_irq(void)
-{
-	at91sam9260_init_interrupts(NULL);
-}
-
 /*
  * USB Host port
  */

@@ -378,6 +373,6 @@ MACHINE_START(CPUAT9G20, "Eukrea CPU9G20")
 	.timer		= &at91sam926x_timer,
 	.map_io		= at91_map_io,
 	.init_early	= cpu9krea_init_early,
-	.init_irq	= cpu9krea_init_irq,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= cpu9krea_board_init,
 MACHINE_END

index 0692606..2d919f5 100644
@@ -82,11 +82,6 @@ static void __init cpuat91_init_early(void)
 	at91_set_serial_console(0);
 }
 
-static void __init cpuat91_init_irq(void)
-{
-	at91rm9200_init_interrupts(NULL);
-}
-
 static struct at91_eth_data __initdata cpuat91_eth_data = {
 	.is_rmii	= 1,
 };

@@ -182,6 +177,6 @@ MACHINE_START(CPUAT91, "Eukrea")
 	.timer		= &at91rm9200_timer,
 	.map_io		= at91_map_io,
 	.init_early	= cpuat91_init_early,
-	.init_irq	= cpuat91_init_irq,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= cpuat91_board_init,
 MACHINE_END

index 923cccb..17654d5 100644
@@ -58,11 +58,6 @@ static void __init csb337_init_early(void)
 	at91_set_serial_console(0);
 }
 
-static void __init csb337_init_irq(void)
-{
-	at91rm9200_init_interrupts(NULL);
-}
-
 static struct at91_eth_data __initdata csb337_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC2,
 	.is_rmii	= 0,

@@ -260,6 +255,6 @@ MACHINE_START(CSB337, "Cogent CSB337")
 	.timer		= &at91rm9200_timer,
 	.map_io		= at91_map_io,
 	.init_early	= csb337_init_early,
-	.init_irq	= csb337_init_irq,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= csb337_board_init,
 MACHINE_END

index 51131ca..72b5567 100644
@@ -52,11 +52,6 @@ static void __init csb637_init_early(void)
 	at91_set_serial_console(0);
 }
 
-static void __init csb637_init_irq(void)
-{
-	at91rm9200_init_interrupts(NULL);
-}
-
 static struct at91_eth_data __initdata csb637_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC0,
 	.is_rmii	= 0,

@@ -141,6 +136,6 @@ MACHINE_START(CSB637, "Cogent CSB637")
 	.timer		= &at91rm9200_timer,
 	.map_io		= at91_map_io,
 	.init_early	= csb637_init_early,
-	.init_irq	= csb637_init_irq,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= csb637_board_init,
 MACHINE_END

index 705071c..01170a2 100644
@@ -60,11 +60,6 @@ static void __init eb9200_init_early(void)
 	at91_set_serial_console(0);
 }
 
-static void __init eb9200_init_irq(void)
-{
-	at91rm9200_init_interrupts(NULL);
-}
-
 static struct at91_eth_data __initdata eb9200_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC4,
 	.is_rmii	= 1,

@@ -123,6 +118,6 @@ MACHINE_START(ATEB9200, "Embest ATEB9200")
 	.timer		= &at91rm9200_timer,
 	.map_io		= at91_map_io,
 	.init_early	= eb9200_init_early,
-	.init_irq	= eb9200_init_irq,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= eb9200_board_init,
 MACHINE_END

index a9f106a..7c0313c 100644
@@ -64,11 +64,6 @@ static void __init ecb_at91init_early(void)
 	at91_set_serial_console(0);
 }
 
-static void __init ecb_at91init_irq(void)
-{
-	at91rm9200_init_interrupts(NULL);
-}
-
 static struct at91_eth_data __initdata ecb_at91eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC4,
 	.is_rmii	= 0,

@@ -175,6 +170,6 @@ MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
 	.timer		= &at91rm9200_timer,
 	.map_io		= at91_map_io,
 	.init_early	= ecb_at91init_early,
-	.init_irq	= ecb_at91init_irq,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= ecb_at91board_init,
 MACHINE_END

index 8639fbd..8252c72 100644
@@ -47,11 +47,6 @@ static void __init eco920_init_early(void)
 	at91_set_serial_console(0);
 }
 
-static void __init eco920_init_irq(void)
-{
-	at91rm9200_init_interrupts(NULL);
-}
-
 static struct at91_eth_data __initdata eco920_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC2,
 	.is_rmii	= 1,

@@ -137,6 +132,6 @@ MACHINE_START(ECO920, "eco920")
 	.timer		= &at91rm9200_timer,
 	.map_io		= at91_map_io,
 	.init_early	= eco920_init_early,
-	.init_irq	= eco920_init_irq,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= eco920_board_init,
 MACHINE_END

index f45583e..4c3f65d 100644
@@ -49,11 +49,6 @@ static void __init flexibity_init_early(void)
 	at91_set_serial_console(0);
 }
 
-static void __init flexibity_init_irq(void)
-{
-	at91sam9260_init_interrupts(NULL);
-}
-
 /* USB Host port */
 static struct at91_usbh_data __initdata flexibity_usbh_data = {
 	.ports		= 2,

@@ -157,6 +152,6 @@ MACHINE_START(FLEXIBITY, "Flexibity Connect")
 	.timer		= &at91sam926x_timer,
 	.map_io		= at91_map_io,
 	.init_early	= flexibity_init_early,
-	.init_irq	= flexibity_init_irq,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= flexibity_board_init,
 MACHINE_END

index b78442b..f27d1a7 100644
@@ -101,12 +101,6 @@ static void __init foxg20_init_early(void)
 
 }
 
-static void __init foxg20_init_irq(void)
-{
-	at91sam9260_init_interrupts(NULL);
-}
-
-
 /*
  * USB Host port
  */

@@ -269,6 +263,6 @@ MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20")
 	.timer		= &at91sam926x_timer,
 	.map_io		= at91_map_io,
 	.init_early	= foxg20_init_early,
-	.init_irq	= foxg20_init_irq,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= foxg20_board_init,
 MACHINE_END

index 6588143..34d2712 100644
@@ -75,11 +75,6 @@ static void __init gsia18s_init_early(void)
 	at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
 }
 
-static void __init init_irq(void)
-{
-	at91sam9260_init_interrupts(NULL);
-}
-
 /*
  * Two USB Host ports
  */

index d26b960..4a17089 100644
@@ -61,11 +61,6 @@ static void __init kafa_init_early(void)
 	at91_set_serial_console(0);
 }
 
-static void __init kafa_init_irq(void)
-{
-	at91rm9200_init_interrupts(NULL);
-}
-
 static struct at91_eth_data __initdata kafa_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC4,
 	.is_rmii	= 0,

@@ -101,6 +96,6 @@ MACHINE_START(KAFA, "Sperry-Sun KAFA")
 	.timer		= &at91rm9200_timer,
 	.map_io		= at91_map_io,
 	.init_early	= kafa_init_early,
-	.init_irq	= kafa_init_irq,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= kafa_board_init,
 MACHINE_END

index a4d8153..9dc8d49 100644
@@ -69,11 +69,6 @@ static void __init kb9202_init_early(void)
 	at91_set_serial_console(0);
 }
 
-static void __init kb9202_init_irq(void)
-{
-	at91rm9200_init_interrupts(NULL);
-}
-
 static struct at91_eth_data __initdata kb9202_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PB29,
 	.is_rmii	= 0,

@@ -142,6 +137,6 @@ MACHINE_START(KB9200, "KB920x")
 	.timer		= &at91rm9200_timer,
 	.map_io		= at91_map_io,
 	.init_early	= kb9202_init_early,
-	.init_irq	= kb9202_init_irq,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= kb9202_board_init,
 MACHINE_END

index 26a4c63..9bc6ab3 100644
@@ -66,12 +66,6 @@ static void __init neocore926_init_early(void)
 	at91_set_serial_console(0);
 }
 
-static void __init neocore926_init_irq(void)
-{
-	at91sam9263_init_interrupts(NULL);
-}
-
-
 /*
  * USB Host port
  */

@@ -390,6 +384,6 @@ MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926")
 	.timer		= &at91sam926x_timer,
 	.map_io		= at91_map_io,
 	.init_early	= neocore926_init_early,
-	.init_irq	= neocore926_init_irq,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= neocore926_board_init,
 MACHINE_END

index 7651e7f..23785e2 100644
@@ -53,13 +53,6 @@ static void __init pcontrol_g20_init_early(void)
 	at91_register_uart(AT91SAM9260_ID_US4, 3, 0);
 }
 
-
-static void __init init_irq(void)
-{
-	at91sam9260_init_interrupts(NULL);
-}
-
-
 static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { {
 	.ncs_read_setup		= 16,
 	.nrd_setup		= 18,

index c7294f8..b7b8390 100644
@@ -60,11 +60,6 @@ static void __init picotux200_init_early(void)
 	at91_set_serial_console(0);
 }
 
-static void __init picotux200_init_irq(void)
-{
-	at91rm9200_init_interrupts(NULL);
-}
-
 static struct at91_eth_data __initdata picotux200_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC4,
 	.is_rmii	= 1,

@@ -126,6 +121,6 @@ MACHINE_START(PICOTUX2XX, "picotux 200")
 	.timer		= &at91rm9200_timer,
 	.map_io		= at91_map_io,
 	.init_early	= picotux200_init_early,
-	.init_irq	= picotux200_init_irq,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= picotux200_board_init,
 MACHINE_END

index 68e31a9..81f9110 100644
@@ -72,12 +72,6 @@ static void __init ek_init_early(void)
 
 }
 
-static void __init ek_init_irq(void)
-{
-	at91sam9260_init_interrupts(NULL);
-}
-
-
 /*
  * USB Host port
  */

@@ -271,6 +265,6 @@ MACHINE_START(QIL_A9260, "CALAO QIL_A9260")
 	.timer		= &at91sam926x_timer,
 	.map_io		= at91_map_io,
 	.init_early	= ek_init_early,
-	.init_irq	= ek_init_irq,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= ek_board_init,
 MACHINE_END

index 97c6f21..6f08faa 100644
@@ -65,11 +65,6 @@ static void __init dk_init_early(void)
 	at91_set_serial_console(0);
 }
 
-static void __init dk_init_irq(void)
-{
-	at91rm9200_init_interrupts(NULL);
-}
-
 static struct at91_eth_data __initdata dk_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC4,
 	.is_rmii	= 1,

@@ -230,6 +225,6 @@ MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
 	.timer		= &at91rm9200_timer,
 	.map_io		= at91_map_io,
 	.init_early	= dk_init_early,
-	.init_irq	= dk_init_irq,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= dk_board_init,
 MACHINE_END

index 72aa8bf..85bcccd 100644
@@ -65,11 +65,6 @@ static void __init ek_init_early(void)
 	at91_set_serial_console(0);
 }
 
-static void __init ek_init_irq(void)
-{
-	at91rm9200_init_interrupts(NULL);
-}
-
 static struct at91_eth_data __initdata ek_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC4,
 	.is_rmii	= 1,

@@ -196,6 +191,6 @@ MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
 	.timer		= &at91rm9200_timer,
 	.map_io		= at91_map_io,
 	.init_early	= ek_init_early,
-	.init_irq	= ek_init_irq,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= ek_board_init,
 MACHINE_END

index 93c36bd..4d3a02f 100644
@@ -67,12 +67,6 @@ static void __init ek_init_early(void)
 	at91_set_serial_console(0);
 }
 
-static void __init ek_init_irq(void)
-{
-	at91sam9260_init_interrupts(NULL);
-}
-
-
 /*
  * USB Host port
  */

@@ -215,6 +209,6 @@ MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
 	.timer		= &at91sam926x_timer,
 	.map_io		= at91_map_io,
 	.init_early	= ek_init_early,
-	.init_irq	= ek_init_irq,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= ek_board_init,
 MACHINE_END

index 0330db3..12f75a3 100644
@@ -70,12 +70,6 @@ static void __init ek_init_early(void)
 	at91_set_serial_console(0);
 }
 
-static void __init ek_init_irq(void)
-{
-	at91sam9260_init_interrupts(NULL);
-}
-
-
 /*
  * USB Host port
  */

@@ -356,6 +350,6 @@ MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
 	.timer		= &at91sam926x_timer,
 	.map_io		= at91_map_io,
 	.init_early	= ek_init_early,
-	.init_irq	= ek_init_irq,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= ek_board_init,
 MACHINE_END

index 65ab1cd..785b484 100644
@@ -69,12 +69,6 @@ static void __init ek_init_early(void)
 	at91_set_serial_console(0);
 }
 
-static void __init ek_init_irq(void)
-{
-	at91sam9261_init_interrupts(NULL);
-}
-
-
 /*
  * DM9000 ethernet device
  */

@@ -623,6 +617,6 @@ MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
 	.timer		= &at91sam926x_timer,
 	.map_io		= at91_map_io,
 	.init_early	= ek_init_early,
-	.init_irq	= ek_init_irq,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= ek_board_init,
 MACHINE_END

index 5b07981..70e5646 100644
@@ -68,12 +68,6 @@ static void __init ek_init_early(void)
 	at91_set_serial_console(0);
 }
 
-static void __init ek_init_irq(void)
-{
-	at91sam9263_init_interrupts(NULL);
-}
-
-
 /*
  * USB Host port
  */

@@ -454,6 +448,6 @@ MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
 	.timer		= &at91sam926x_timer,
 	.map_io		= at91_map_io,
 	.init_early	= ek_init_early,
-	.init_irq	= ek_init_irq,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= ek_board_init,
 MACHINE_END

index 8e7327a..c08a1e7 100644
@@ -81,12 +81,6 @@ static void __init ek_init_early(void)
 	at91_set_serial_console(0);
 }
 
-static void __init ek_init_irq(void)
-{
-	at91sam9260_init_interrupts(NULL);
-}
-
-
 /*
  * USB Host port
  */

@@ -406,7 +400,7 @@ MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK")
 	.timer		= &at91sam926x_timer,
 	.map_io		= at91_map_io,
 	.init_early	= ek_init_early,
-	.init_irq	= ek_init_irq,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= ek_board_init,
 MACHINE_END
 

@@ -415,6 +409,6 @@ MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod")
 	.timer		= &at91sam926x_timer,
 	.map_io		= at91_map_io,
 	.init_early	= ek_init_early,
-	.init_irq	= ek_init_irq,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= ek_board_init,
 MACHINE_END

index f112ad9..7851efd 100644
@@ -63,12 +63,6 @@ static void __init ek_init_early(void)
 	at91_set_serial_console(0);
 }
 
-static void __init ek_init_irq(void)
-{
-	at91sam9g45_init_interrupts(NULL);
-}
-
-
 /*
  * USB HS Host port (common to OHCI & EHCI)
  */

@@ -424,6 +418,6 @@ MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
 	.timer		= &at91sam926x_timer,
 	.map_io		= at91_map_io,
 	.init_early	= ek_init_early,
-	.init_irq	= ek_init_irq,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= ek_board_init,
 MACHINE_END

index defbca4..4f14b54 100644
@@ -53,12 +53,6 @@ static void __init ek_init_early(void)
 	at91_set_serial_console(0);
 }
 
-static void __init ek_init_irq(void)
-{
-	at91sam9rl_init_interrupts(NULL);
-}
-
-
 /*
  * USB HS Device port
  */

@@ -332,6 +326,6 @@ MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
 	.timer		= &at91sam926x_timer,
 	.map_io		= at91_map_io,
 	.init_early	= ek_init_early,
-	.init_irq	= ek_init_irq,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= ek_board_init,
 MACHINE_END

index c600b14..25cd3ff 100644
@@ -55,11 +55,6 @@ static void __init snapper9260_init_early(void)
 	at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
 }
 
-static void __init snapper9260_init_irq(void)
-{
-	at91sam9260_init_interrupts(NULL);
-}
-
 static struct at91_usbh_data __initdata snapper9260_usbh_data = {
 	.ports		= 2,
 };

@@ -181,7 +176,7 @@ MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module")
 	.timer		= &at91sam926x_timer,
 	.map_io		= at91_map_io,
 	.init_early	= snapper9260_init_early,
-	.init_irq	= snapper9260_init_irq,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= snapper9260_board_init,
 MACHINE_END
 

index e65efda..9821be2 100644
@@ -76,12 +76,6 @@ static void __init portuxg20_init_early(void)
 	at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
 }
 
-static void __init init_irq(void)
-{
-	at91sam9260_init_interrupts(NULL);
-}
-
-
 /*
  * NAND flash
  */

index afc3b04..8c4c1a0 100644
@@ -60,12 +60,6 @@ static void __init ek_init_early(void)
 	at91_set_serial_console(0);
 }
 
-static void __init ek_init_irq(void)
-{
-	at91sam9260_init_interrupts(NULL);
-}
-
-
 /*
  * USB Host port
  */

@@ -231,6 +225,6 @@ MACHINE_START(USB_A9260, "CALAO USB_A9260")
 	.timer		= &at91sam926x_timer,
 	.map_io		= at91_map_io,
 	.init_early	= ek_init_early,
-	.init_irq	= ek_init_irq,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= ek_board_init,
 MACHINE_END

index 25357e0..25e7937 100644
@@ -59,12 +59,6 @@ static void __init ek_init_early(void)
 	at91_set_serial_console(0);
 }
 
-static void __init ek_init_irq(void)
-{
-	at91sam9263_init_interrupts(NULL);
-}
-
-
 /*
  * USB Host port
  */

@@ -247,6 +241,6 @@ MACHINE_START(USB_A9263, "CALAO USB_A9263")
 	.timer		= &at91sam926x_timer,
 	.map_io		= at91_map_io,
 	.init_early	= ek_init_early,
-	.init_irq	= ek_init_irq,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= ek_board_init,
 MACHINE_END

index e8a8ab9..95edcbd 100644
@@ -79,12 +79,6 @@ static void __init yl9200_init_early(void)
 	at91_set_serial_console(0);
 }
 
-static void __init yl9200_init_irq(void)
-{
-	at91rm9200_init_interrupts(NULL);
-}
-
-
 /*
  * LEDs
  */

@@ -601,6 +595,6 @@ MACHINE_START(YL9200, "uCdragon YL-9200")
 	.timer		= &at91rm9200_timer,
 	.map_io		= at91_map_io,
 	.init_early	= yl9200_init_early,
-	.init_irq	= yl9200_init_irq,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= yl9200_board_init,
 MACHINE_END

index 84e5b1d..e807520 100644
@@ -19,15 +19,9 @@ extern void __init at91_initialize(unsigned long main_clock);
 extern void __init at91x40_initialize(unsigned long main_clock);
 
  /* Interrupts */
-extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
-extern void __init at91sam9260_init_interrupts(unsigned int priority[]);
-extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
-extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
-extern void __init at91sam9rl_init_interrupts(unsigned int priority[]);
-extern void __init at91sam9g45_init_interrupts(unsigned int priority[]);
+extern void __init at91_init_irq_default(void);
+extern void __init at91_init_interrupts(unsigned int priority[]);
 extern void __init at91x40_init_interrupts(unsigned int priority[]);
-extern void __init at91cap9_init_interrupts(unsigned int priority[]);
-extern void __init at572d940hf_init_interrupts(unsigned int priority[]);
 extern void __init at91_aic_init(unsigned int priority[]);
 
  /* Timer */

index dd62c46..c8f23ae 100644
@@ -18,6 +18,20 @@
 
 struct at91_soc __initdata at91_boot_soc;
 
+void __init at91_init_irq_default(void)
+{
+	at91_init_interrupts(current_soc.default_irq_priority);
+}
+
+void __init at91_init_interrupts(unsigned int *priority)
+{
+	/* Initialize the AIC interrupt controller */
+	at91_aic_init(priority);
+
+	/* Enable GPIO interrupts */
+	at91_gpio_irq_setup();
+}
+
 static struct map_desc at91_io_desc __initdata = {
 	.virtual	= AT91_VA_BASE_SYS,
 	.pfn		= __phys_to_pfn(AT91_BASE_SYS),

index 917f610..d847565 100644
@@ -5,6 +5,7 @@
  */
 
 struct at91_soc {
+	unsigned int *default_irq_priority;
 	void (*map_io)(void);
 	void (*init)(unsigned long main_clock);
 };

index 1f3abb4..291beb7 100644
@@ -336,7 +336,7 @@ static void __init at91sam9xe_map_io(void)
 {
 	unsigned long cidr, sram_size;
 
-	cidr = at91_sys_read(AT91_DBGU_CIDR);
+	cidr = dbgu_readl(AT91_DBGU, CIDR);
 
 	switch (cidr & AT91_CIDR_SRAMSIZ) {
 		case AT91_CIDR_SRAMSIZ_32K:

index c8de47f..86fc31c 100644
@@ -299,7 +299,7 @@ static void __init at91sam9rl_map_io(void)
 {
 	unsigned long cidr, sram_size;
 
-	cidr = at91_sys_read(AT91_DBGU_CIDR);
+	cidr = dbgu_readl(AT91_DBGU, CIDR);
 
 	switch (cidr & AT91_CIDR_SRAMSIZ) {
 		case AT91_CIDR_SRAMSIZ_32K:

index 6dcaa77..bacf3e8 100644
@@ -16,22 +16,25 @@
 #ifndef AT91_DBGU_H
 #define AT91_DBGU_H
 
+#define dbgu_readl(dbgu, field) \
+	__raw_readl(AT91_VA_BASE_SYS + dbgu + AT91_DBUG_ ## field)
+
 #ifdef AT91_DBGU
-#define AT91_DBGU_CR		(AT91_DBGU + 0x00)	/* Control Register */
-#define AT91_DBGU_MR		(AT91_DBGU + 0x04)	/* Mode Register */
-#define AT91_DBGU_IER		(AT91_DBGU + 0x08)	/* Interrupt Enable Register */
+#define AT91_DBGU_CR		(0x00)	/* Control Register */
+#define AT91_DBGU_MR		(0x04)	/* Mode Register */
+#define AT91_DBGU_IER		(0x08)	/* Interrupt Enable Register */
 #define		AT91_DBGU_TXRDY		(1 << 1)		/* Transmitter Ready */
 #define		AT91_DBGU_TXEMPTY	(1 << 9)		/* Transmitter Empty */
-#define AT91_DBGU_IDR		(AT91_DBGU + 0x0c)	/* Interrupt Disable Register */
-#define AT91_DBGU_IMR		(AT91_DBGU + 0x10)	/* Interrupt Mask Register */
-#define AT91_DBGU_SR		(AT91_DBGU + 0x14)	/* Status Register */
-#define AT91_DBGU_RHR		(AT91_DBGU + 0x18)	/* Receiver Holding Register */
-#define AT91_DBGU_THR		(AT91_DBGU + 0x1c)	/* Transmitter Holding Register */
-#define AT91_DBGU_BRGR		(AT91_DBGU + 0x20)	/* Baud Rate Generator Register */
+#define AT91_DBGU_IDR		(0x0c)	/* Interrupt Disable Register */
+#define AT91_DBGU_IMR		(0x10)	/* Interrupt Mask Register */
+#define AT91_DBGU_SR		(0x14)	/* Status Register */
+#define AT91_DBGU_RHR		(0x18)	/* Receiver Holding Register */
+#define AT91_DBGU_THR		(0x1c)	/* Transmitter Holding Register */
+#define AT91_DBGU_BRGR		(0x20)	/* Baud Rate Generator Register */
 
-#define AT91_DBGU_CIDR		(AT91_DBGU + 0x40)	/* Chip ID Register */
-#define AT91_DBGU_EXID		(AT91_DBGU + 0x44)	/* Chip ID Extension Register */
-#define AT91_DBGU_FNR		(AT91_DBGU + 0x48)	/* Force NTRST Register [SAM9 only] */
+#define AT91_DBGU_CIDR		(0x40)	/* Chip ID Register */
+#define AT91_DBGU_EXID		(0x44)	/* Chip ID Extension Register */
+#define AT91_DBGU_FNR		(0x48)	/* Force NTRST Register [SAM9 only] */
 #define		AT91_DBGU_FNTRST	(1 << 0)		/* Force NTRST */
 
 #endif /* AT91_DBGU */

index ab00372..0d81087 100644
@@ -43,12 +43,12 @@
 
 static inline unsigned long at91_cpu_identify(void)
 {
-	return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
+	return (dbgu_readl(AT91_DBGU, CIDR) & ~AT91_CIDR_VERSION);
 }
 
 static inline unsigned long at91_cpu_fully_identify(void)
 {
-	return at91_sys_read(AT91_DBGU_CIDR);
+	return dbgu_readl(AT91_DBGU, CIDR);
 }
 
 #define ARCH_EXID_AT91SAM9M11	0x00000001

@@ -64,7 +64,7 @@ static inline unsigned long at91_cpu_fully_identify(void)
 
 static inline unsigned long at91_exid_identify(void)
 {
-	return at91_sys_read(AT91_DBGU_EXID);
+	return dbgu_readl(AT91_DBGU, EXID);
 }
 
 

@@ -74,7 +74,7 @@ static inline unsigned long at91_exid_identify(void)
 
 static inline unsigned long at91_arch_identify(void)
 {
-	return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH);
+	return (dbgu_readl(AT91_DBGU, CIDR) & AT91_CIDR_ARCH);
 }
 
 #ifdef CONFIG_ARCH_AT91CAP9

index 89e4807..9c8c8ce 100644
@@ -313,14 +313,6 @@ static void at91rm9200_reset(void)
 	at91_sys_write(AT91_ST_CR, AT91_ST_WDRST);
 }
 
-int rm9200_type;
-EXPORT_SYMBOL(rm9200_type);
-
-void __init at91rm9200_set_type(int type)
-{
-	rm9200_type = type;
-}
-
 /* --------------------------------------------------------------------
  *  AT91RM9200 processor initialization
  * -------------------------------------------------------------------- */

index 291beb7..cac454e 100644
@@ -17,6 +17,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <mach/cpu.h>
+#include <mach/at91_dbgu.h>
 #include <mach/at91sam9260.h>
 #include <mach/at91_pmc.h>
 #include <mach/at91_rstc.h>

@@ -334,11 +335,9 @@ static void at91sam9260_poweroff(void)
 
 static void __init at91sam9xe_map_io(void)
 {
-	unsigned long cidr, sram_size;
+	unsigned long sram_size;
 
-	cidr = dbgu_readl(AT91_DBGU, CIDR);
-
-	switch (cidr & AT91_CIDR_SRAMSIZ) {
+	switch (at91_soc_data.cidr & AT91_CIDR_SRAMSIZ) {
 		case AT91_CIDR_SRAMSIZ_32K:
 			sram_size = 2 * SZ_16K;
 			break;

index 86fc31c..c25c173 100644
@@ -16,6 +16,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <mach/cpu.h>
+#include <mach/at91_dbgu.h>
 #include <mach/at91sam9rl.h>
 #include <mach/at91_pmc.h>
 #include <mach/at91_rstc.h>

@@ -297,11 +298,9 @@ static void at91sam9rl_poweroff(void)
 
 static void __init at91sam9rl_map_io(void)
 {
-	unsigned long cidr, sram_size;
+	unsigned long sram_size;
 
-	cidr = dbgu_readl(AT91_DBGU, CIDR);
-
-	switch (cidr & AT91_CIDR_SRAMSIZ) {
+	switch (at91_soc_data.cidr & AT91_CIDR_SRAMSIZ) {
 		case AT91_CIDR_SRAMSIZ_32K:
 			sram_size = 2 * SZ_16K;
 			break;

257 lines not on this page · raw message

252 lines not on this page · raw message

index d847565..1125671 100644
@@ -20,3 +20,41 @@ extern struct at91_soc at91sam9263_soc;
 extern struct at91_soc at91sam9g45_soc;
 extern struct at91_soc at91sam9rl_soc;
 extern struct at91_soc at91sam9x5_soc;
+
+#define set_at91_boot_soc(c) do { at91_boot_soc = c; } while(0)
+
+#if !defined(CONFIG_ARCH_AT572D940HF)
+#define at572d940hf_soc	at91_boot_soc
+#endif
+
+#if !defined(CONFIG_ARCH_AT91CAP9)
+#define at91cap9_soc	at91_boot_soc
+#endif
+
+#if !defined(CONFIG_ARCH_AT91RM9200)
+#define at91rm9200_soc	at91_boot_soc
+#endif
+
+#if !(defined(CONFIG_ARCH_AT91SAM9260) && defined(CONFIG_ARCH_AT91SAM9G20))
+#define at91sam9260_soc	at91_boot_soc
+#endif
+
+#if !(defined(CONFIG_ARCH_AT91SAM9261) && defined(CONFIG_ARCH_AT91SAM9G10))
+#define at91sam9261_soc	at91_boot_soc
+#endif
+
+#if !defined(CONFIG_ARCH_AT91SAM9263)
+#define at91sam9263_soc	at91_boot_soc
+#endif
+
+#if !defined(CONFIG_ARCH_AT91SAM9G45)
+#define at91sam9g45_soc	at91_boot_soc
+#endif
+
+#if !defined(CONFIG_ARCH_AT91SAM9RL)
+#define at91sam9rl_soc	at91_boot_soc
+#endif
+
+#if !defined(CONFIG_ARCH_AT91SAM9X5)
+#define at91sam9x5_soc	at91_boot_soc
+#endif