Add support for Network Space v2 and parents
PATCH v8 1/1 Add support for Network Space v2 and parents
This patch add support for the Network Space v2 board and parents, based on the Marvell Kirkwood 6281 SoC. This include Network Space (Max) v2 and Internet Space v2.
Additional information is available at:
http://lacie-nas.org/doku.php?id=network_space_v2
---
Changes for v2:
- add entries to MAINTAINERS file
- move boards from root Makefile to boards.cfg
- move MACH_TYPE definition into netspace_v2.h
- remove CONFIG_SYS_HZ redefinition
- turn PHY initialization message into debug()
Changes for v3: none
Changes for v4:
- enhance commit message: add SoC information
Changes for v5: none
Changes for v6:
- enable device tree support
- clean some "#define" in netspace_v2.h
- enhance commit message: provide description URL and mention SoC family
- rebase against u-boot-{arm,marvell}/master branches
Changes for v7:
- rebase against u-boot-marvell/master branch
Changes for v8:
- update commit title (add netspace_v2 parents information).
- move GPIO button definition into header file.
- update CONFIG_IDENT_STRING with boards alias.
- handle wrong board definition.
- by default, use DHCP to get IP address.
MAINTAINERS | 6 + board/LaCie/netspace_v2/Makefile | 49 ++++++++++ board/LaCie/netspace_v2/kwbimage.cfg | 162 +++++++++++++++++++++++++++++++++ board/LaCie/netspace_v2/netspace_v2.c | 142 +++++++++++++++++++++++++++++ board/LaCie/netspace_v2/netspace_v2.h | 42 +++++++++ boards.cfg | 3 + include/configs/netspace_v2.h | 162 +++++++++++++++++++++++++++++++++ 7 files changed, 566 insertions(+), 0 deletions(-) create mode 100644 board/LaCie/netspace_v2/Makefile create mode 100644 board/LaCie/netspace_v2/kwbimage.cfg create mode 100644 board/LaCie/netspace_v2/netspace_v2.c create mode 100644 board/LaCie/netspace_v2/netspace_v2.h create mode 100644 include/configs/netspace_v2.h
MAINTAINERS +6 -0
@@ -645,6 +645,12 @@ Sedji Gaouaou<[email protected]> at91sam9g10ek ARM926EJS (AT91SAM9G10 SoC) at91sam9m10g45ek ARM926EJS (AT91SAM9G45 SoC) +Simon Guinot <[email protected]> + + inetspace_v2 ARM926EJS (Kirkwood SoC) + netspace_v2 ARM926EJS (Kirkwood SoC) + netspace_max_v2 ARM926EJS (Kirkwood SoC) + Marius Gr?ger <[email protected]> impa7 ARM720T (EP7211)
board/LaCie/netspace_v2/Makefile new file +49 -0
49 lines not on this page · raw message
board/LaCie/netspace_v2/kwbimage.cfg new file +162 -0
162 lines not on this page · raw message
board/LaCie/netspace_v2/netspace_v2.c new file +142 -0
142 lines not on this page · raw message
board/LaCie/netspace_v2/netspace_v2.h new file +42 -0
42 lines not on this page · raw message
boards.cfg +3 -0
@@ -104,6 +104,9 @@ davinci_schmoogie arm arm926ejs schmoogie davinci davinci_sffsdr arm arm926ejs sffsdr davinci davinci davinci_sonata arm arm926ejs sonata davinci davinci suen3 arm arm926ejs km_arm keymile kirkwood +inetspace_v2 arm arm926ejs netspace_v2 LaCie kirkwood netspace_v2:INETSPACE_V2 +netspace_v2 arm arm926ejs netspace_v2 LaCie kirkwood netspace_v2:NETSPACE_V2 +netspace_max_v2 arm arm926ejs netspace_v2 LaCie kirkwood netspace_v2:NETSPACE_MAX_V2 guruplug arm arm926ejs - Marvell kirkwood mv88f6281gtw_ge arm arm926ejs - Marvell kirkwood openrd_base arm arm926ejs openrd Marvell kirkwood openrd:BOARD_IS_OPENRD_BASE
include/configs/netspace_v2.h new file +162 -0
162 lines not on this page · raw message
Signature · 1 line
1.6.3.1
PATCH v8 1/1 Add support for Network Space v2 and parents
Dear Simon Guinot,
Quoted 10 lines · In message <[email protected]> you…
--===============2147409246==
This patch add support for the Network Space v2 board and parents, based on the Marvell Kirkwood 6281 SoC. This include Network Space (Max) v2 and Internet Space v2.
Additional information is available at:
http://lacie-nas.org/doku.php?id=network_space_v2Signed-off-by Simon Guinot <[email protected]>
Seems you manage to get irnored once more by patchwork.
I notice that even though you appear to use git-send-email for sending, your patch is not submitted inline as I would expect, but as a multipart/mixed - are you doing anything special? Do you see any warnings?
I also see that you are using git 1.6.3.1 which is pretty old. Maybe you can update to a more revcent git version and check if this helps?
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Change is the essential process of all existence. -- Spock, "Let That Be Your Last Battlefield", stardate 5730.2
PATCH v8 1/1 Add support for Network Space v2 and parents
Hi Wolfgang,
Quoted 9 lines · Wolfgang Denk
Dear Simon Guinot,
Quoted 6 lines · In message <[email protected]> you…
--===============2147409246==
This patch add support for the Network Space v2 board and parents, based on the Marvell Kirkwood 6281 SoC. This include Network Space (Max) v2 and Internet Space v2.
Quoted 6 lines
Quoted 4 lines
Additional information is available at:
http://lacie-nas.org/doku.php?id=network_space_v2Signed-off-by Simon Guinot <[email protected]>Seems you manage to get irnored once more by patchwork.
:(
Quoted 5 lines
I notice that even though you appear to use git-send-email for sending, your patch is not submitted inline as I would expect, but as a multipart/mixed - are you doing anything special? Do you see any warnings?
Nothing special and no warnings. Moreover, within the whole series, this patch is the only one affected...
Quoted 3 lines
I also see that you are using git 1.6.3.1 which is pretty old. Maybe you can update to a more revcent git version and check if this helps?
Yes, my development frameworks are self-contained inside chroots and I don't update them very often.
I will check with more recent git version.
Regards,
Simon
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: Digital signature
Url : http://lists.denx.de/pipermail/u-boot/attachments/20110515/ce2db2fd/attachment.pgp
PATCH v8 1/1 Add support for Network Space v2 and parents
In reply to Wolfgang DenkQuoted 8 lines · Simon Guinot
This patch add support for the Network Space v2 board and parents, based on the Marvell Kirkwood 6281 SoC. This include Network Space (Max) v2 and Internet Space v2.
Additional information is available at:
http://lacie-nas.org/doku.php?id=network_space_v2Signed-off-by Simon Guinot <[email protected]>
...snip...
Quoted 5 lines
MAINTAINERS +0
-0
MAINTAINERS Sedji Gaouaou<[email protected]> · line 654
Quoted 10 lines
MAINTAINERS +6
-0@@ -645,6 +645,12 @@ Sedji Gaouaou<[email protected]> at91sam9g10ek ARM926EJS (AT91SAM9G10 SoC) at91sam9m10g45ek ARM926EJS (AT91SAM9G45 SoC) +Simon Guinot <[email protected]> + + inetspace_v2 ARM926EJS (Kirkwood SoC) + netspace_v2 ARM926EJS (Kirkwood SoC) + netspace_max_v2 ARM926EJS (Kirkwood SoC) + Marius Gr?ger <[email protected]>
^
In my first patch version, the MAINTAINERS entry was missing. Maybe it could a part of the issue ?
Simon
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: Digital signature
Url : http://lists.denx.de/pipermail/u-boot/attachments/20110515/aedc27a8/attachment.pgp
PATCH v8 1/1 Add support for Network Space v2 and parents
In reply to Wolfgang DenkQuoted 9 lines · Wolfgang Denk
Dear Simon Guinot,
Quoted 6 lines · In message <[email protected]> you…
--===============2147409246==
This patch add support for the Network Space v2 board and parents, based on the Marvell Kirkwood 6281 SoC. This include Network Space (Max) v2 and Internet Space v2.
Quoted 7 lines
Quoted 4 lines
Additional information is available at:
http://lacie-nas.org/doku.php?id=network_space_v2Signed-off-by Simon Guinot <[email protected]>Seems you manage to get irnored once more by patchwork.
I too have had patchwork send patches to /dev/null :(
Quoted 4 lines
I notice that even though you appear to use git-send-email for sending, your patch is not submitted inline as I would expect, but as a multipart/mixed - are you doing anything special? Do you see any warnings?
I also only use git-send-email (but I do not have the multipart issue)
Quoted 4 lines
I also see that you are using git 1.6.3.1 which is pretty old. Maybe you can update to a more revcent git version and check if this helps?
I was using 1.7.1 when my patches got dropped
Regards,
Graeme