Skip to contentSkip to conversation

MX53: Add initial support for MX53SMD board.

PATCH New Fabio Estevam 2 participants 2 messages May 13, 2011 – May 15, 2011 Arm i.MX and Layerscape

lore
Share & tools
lore

Fabio Estevam

author
#0 lore raw

PATCH v2 1/1 MX53: Add initial support for MX53SMD board.

Signed-off-by Fabio Estevam <[email protected]>

---
Changes since v1:
- Fix Copyright typo
- Drop board_late_init

 MAINTAINERS                          |    1 +
 board/freescale/mx53smd/Makefile     |   48 ++++++++
 board/freescale/mx53smd/imximage.cfg |   96 +++++++++++++++
 board/freescale/mx53smd/mx53smd.c    |  217 ++++++++++++++++++++++++++++++++++
 boards.cfg                           |    1 +
 include/configs/mx53smd.h            |  190 +++++++++++++++++++++++++++++
 6 files changed, 553 insertions(+), 0 deletions(-)
 create mode 100644 board/freescale/mx53smd/Makefile
 create mode 100644 board/freescale/mx53smd/imximage.cfg
 create mode 100644 board/freescale/mx53smd/mx53smd.c
 create mode 100644 include/configs/mx53smd.h
MAINTAINERS +1 -0
index e2a4ba9..d99896d 100644
@@ -638,6 +638,7 @@ Kristoffer Ericson <[email protected]>
 Fabio Estevam <[email protected]>
 
 	mx31pdk		i.MX31
+	mx53smd		i.MX53
 
 Peter Figuli <[email protected]>
board/freescale/mx53smd/Makefile new file +48 -0

48 lines not on this page · raw message

board/freescale/mx53smd/imximage.cfg new file +96 -0

96 lines not on this page · raw message

board/freescale/mx53smd/mx53smd.c new file +217 -0

217 lines not on this page · raw message

boards.cfg +1 -0
index 2b0900a..dc3acb0 100644
@@ -124,6 +124,7 @@ ca9x4_ct_vxp                 arm         armv7       vexpress            armltd
 efikamx                      arm         armv7       efikamx             -              mx5
 mx51evk                      arm         armv7       mx51evk             freescale      mx5		mx51evk:IMX_CONFIG=board/freescale/mx51evk/imximage.cfg
 mx53evk                      arm         armv7       mx53evk             freescale      mx5		mx53evk:IMX_CONFIG=board/freescale/mx53evk/imximage.cfg
+mx53smd                      arm         armv7       mx53smd             freescale      mx5		mx53smd:IMX_CONFIG=board/freescale/mx53smd/imximage.cfg
 vision2                      arm         armv7       vision2             ttcontrol      mx5
 cm_t35                       arm         armv7       cm_t35              -              omap3
 omap3_overo                  arm         armv7       overo               -              omap3
include/configs/mx53smd.h new file +190 -0

190 lines not on this page · raw message

Signature · 1 line
1.6.0.4
#1 lore raw

PATCH v2 1/1 MX53: Add initial support for MX53SMD board.

Quoted 6 lines · Fabio Estevam
Signed-off-by Fabio Estevam <[email protected]>

---
Changes since v1:
- Fix Copyright typo
- Drop board_late_init

Quoted 12 lines
 MAINTAINERS                          |    1 +
 board/freescale/mx53smd/Makefile     |   48 ++++++++
 board/freescale/mx53smd/imximage.cfg |   96 +++++++++++++++
 board/freescale/mx53smd/mx53smd.c    |  217 ++++++++++++++++++++++++++++++++++
 boards.cfg                           |    1 +
 include/configs/mx53smd.h            |  190 +++++++++++++++++++++++++++++
 6 files changed, 553 insertions(+), 0 deletions(-)
 create mode 100644 board/freescale/mx53smd/Makefile
 create mode 100644 board/freescale/mx53smd/imximage.cfg
 create mode 100644 board/freescale/mx53smd/mx53smd.c
 create mode 100644 include/configs/mx53smd.h

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================